Matching Items (2)
Filtering by
- Creators: Si, Jennie
- Member of: Theses and Dissertations
Description
This report provides an overview of scramjet-powered hypersonic vehicle modeling and control challenges. Such vehicles are characterized by unstable non-minimum phase dynamics with significant coupling and low thrust margins. Recent trends in hypersonic vehicle research are summarized. To illustrate control relevant design issues and tradeoffs, a generic nonlinear 3DOF longitudinal dynamics model capturing aero-elastic-propulsive interactions for wedge-shaped vehicle is used. Limitations of the model are discussed and numerous modifications have been made to address control relevant needs. Two different baseline configurations are examined over a two-stage to orbit ascent trajectory. The report highlights how vehicle level-flight static (trim) and dynamic properties change over the trajectory. Thermal choking constraints are imposed on control system design as a direct consequence of having a finite FER margin. The implication of this state-dependent nonlinear FER margin constraint, the right half plane (RHP) zero, and lightly damped flexible modes, on control system bandwidth (BW) and FPA tracking has been discussed. A control methodology has been proposed that addresses the above dynamics while providing some robustness to modeling uncertainty. Vehicle closure (the ability to fly a trajectory segment subject to constraints) is provided through a proposed vehicle design methodology. The design method attempts to use open loop metrics whenever possible to design the vehicle. The design method is applied to a vehicle/control law closed loop nonlinear simulation for validation. The 3DOF longitudinal modeling results are validated against a newly released NASA 6DOF code.
ContributorsDickeson, Jeffrey James (Author) / Rodriguez, Armando A (Thesis advisor) / Tsakalis, Konstantinos (Committee member) / Si, Jennie (Committee member) / Wells, Valana (Committee member) / Kawski, Mattias (Committee member) / Arizona State University (Publisher)
Created2012
Description
This thesis addresses the design and control of three phase inverters. Such inverters are
used to produce three-phase sinusoidal voltages and currents from a DC source. They
are critical for injecting power from renewable energy sources into the grid. This is
especially true since many of these sources of energy are DC sources (e.g. solar
photovoltaic) or need to be stored in DC batteries because they are intermittent (e.g. wind
and solar). Two classes of inverters are examined in this thesis. A control-centric design
procedure is presented for each class. The first class of inverters is simple in that they
consist of three decoupled subsystems. Such inverters are characterized by no mutual
inductance between the three phases. As such, no multivariable coupling is present and
decentralized single-input single-output (SISO) control theory suffices to generate
acceptable control designs. For this class of inverters several families of controllers are
addressed in order to examine command following as well as input disturbance and noise
attenuation specifications. The goal here is to illuminate fundamental tradeoffs. Such
tradeoffs include an improvement in the in-band command following and output
disturbance attenuation versus a deterioration in out-of-band noise attenuation.
A fundamental deficiency associated with such inverters is their large size. This can be
remedied by designing a smaller core. This naturally leads to the second class of inverters
considered in this work. These inverters are characterized by significant mutual
inductances and multivariable coupling. As such, SISO control theory is generally not
adequate and multiple-input multiple-output (MIMO) theory becomes essential for
controlling these inverters.
used to produce three-phase sinusoidal voltages and currents from a DC source. They
are critical for injecting power from renewable energy sources into the grid. This is
especially true since many of these sources of energy are DC sources (e.g. solar
photovoltaic) or need to be stored in DC batteries because they are intermittent (e.g. wind
and solar). Two classes of inverters are examined in this thesis. A control-centric design
procedure is presented for each class. The first class of inverters is simple in that they
consist of three decoupled subsystems. Such inverters are characterized by no mutual
inductance between the three phases. As such, no multivariable coupling is present and
decentralized single-input single-output (SISO) control theory suffices to generate
acceptable control designs. For this class of inverters several families of controllers are
addressed in order to examine command following as well as input disturbance and noise
attenuation specifications. The goal here is to illuminate fundamental tradeoffs. Such
tradeoffs include an improvement in the in-band command following and output
disturbance attenuation versus a deterioration in out-of-band noise attenuation.
A fundamental deficiency associated with such inverters is their large size. This can be
remedied by designing a smaller core. This naturally leads to the second class of inverters
considered in this work. These inverters are characterized by significant mutual
inductances and multivariable coupling. As such, SISO control theory is generally not
adequate and multiple-input multiple-output (MIMO) theory becomes essential for
controlling these inverters.
ContributorsSarkar, Aratrik (Author) / Rodriguez, Armando A. (Thesis advisor) / Si, Jennie (Committee member) / Tsakalis, Konstantinos (Committee member) / Arizona State University (Publisher)
Created2015