Matching Items (25)
154899-Thumbnail Image.png
Description
Flash memories are critical for embedded devices to operate properly but are susceptible to radiation effects, which make flash memory a key factor to improve the reliability of circuitry. This thesis describes the simulation techniques used to analyze and predict total ionizing dose (TID) effects on 90-nm technology Silicon Storage

Flash memories are critical for embedded devices to operate properly but are susceptible to radiation effects, which make flash memory a key factor to improve the reliability of circuitry. This thesis describes the simulation techniques used to analyze and predict total ionizing dose (TID) effects on 90-nm technology Silicon Storage Technology (SST) SuperFlash Generation 3 devices. Silvaco Atlas is used for both device level design and simulation purposes.

The simulations consist of no radiation and radiation modeling. The no radiation modeling details the cell structure development and characterizes basic operations (read, erase and program) of a flash memory cell. The program time is observed to be approximately 10 μs while the erase time is approximately 0.1 ms.

The radiation modeling uses the fixed oxide charge method to analyze the TID effects on the same flash memory cell. After irradiation, a threshold voltage shift of the flash memory cell is observed. The threshold voltages of a programmed cell and an erased cell are reduced at an average rate of 0.025 V/krad.

The use of simulation techniques allows designers to better understand the TID response of a SST flash memory cell and to predict cell level TID effects without performing the costly in-situ irradiation experiments. The simulation and experimental results agree qualitatively. In particular, simulation results reveal that ‘0’ to ‘1’ errors but not ‘1’ to ‘0’ retention errors occur; likewise, ‘0’ to ‘1’ errors dominate experimental testing, which also includes circuitry effects that can cause ‘1’ to ‘0’ failures. Both simulation and experimental results reveal flash memory cell TID resilience to about 200 krad.
ContributorsChen, Yitao (Author) / Holbert, Keith E. (Thesis advisor) / Clark, Lawrence T. (Committee member) / Allee, David R. (Committee member) / Arizona State University (Publisher)
Created2016
154941-Thumbnail Image.png
Description
It has been hypothesized that the ~25 km Rochechouart-Chassenon impact structure (RCIS) in the NW Massif Central, France, was formed during a Late Triassic (ca. 214 Ma) terrestrial impact event that produced a catena of several large craters. Testing this hypothesis, and assessing its possible impacts on biological evolution,

It has been hypothesized that the ~25 km Rochechouart-Chassenon impact structure (RCIS) in the NW Massif Central, France, was formed during a Late Triassic (ca. 214 Ma) terrestrial impact event that produced a catena of several large craters. Testing this hypothesis, and assessing its possible impacts on biological evolution, requires both accurate and precise dating of candidate impact structures. Like many of these structures, the age of the RCIS is controversial because geochronological datasets yield contradictory results, even when a single isotopic system is used; for example, the two most recent 40Ar/39Ar studies of RCIS yielded statistically inconsistent dates of 201 ± 2 Ma (2σ) and 214 ± 8 Ma (2σ). While the precision offered by various geochronometers used to date impact structures varies significantly, a fair way to assess the confidence scientists might have in the accuracy of an impact age is to establish whether or not multiple chronometers yield statistically indistinguishable ages when applied to that structure. With that in mind, I have applied the (U-Th)/He, U/Pb, and radiation damage chronometers to zircons separated from two different RCIS impactites. My best estimate of the zircon (U-Th)/He age of the impact event is 191.6 ± 9.1 Ma at the 95% confidence level. U/Pb zircon dates suggest that most zircons in the RCIS target rocks were not completely reset during impact, but a subset (n = 8) of zircons appear to have crystallized from the impact melt or to have been completely reset; these zircons indicate a U/Pb impact age of 202.6 ± 5.8 Ma (95% confidence level). Zircon radiation damage dates are highly variable, indicating that the RCIS event resulted only in partial annealing of pre-impact zircon in the country rock, but a small sub-population of zircons yielded a mean date of 211 ± 13 Ma (95% confidence level). These results – all statistically indistinguishable from the previously published 40Ar/39Ar date of 201 ± 2 Ma – collectively argue that the impact age was near the presently agreed upon Triassic-Jurassic boundary. This age raises the possibility that seismite and tsunamite deposits found in the present-day British Isles may be related to the RCIS.
ContributorsHorne, Audrey (Author) / Hodges, Kip V. (Thesis advisor) / van Soest, Matthijs (Committee member) / Wittmann, Axel (Committee member) / Arizona State University (Publisher)
Created2016
149395-Thumbnail Image.png
Description
The RADiation sensitive Field Effect Transistor (RADFET) has been conventionally used to measure radiation dose levels. These dose sensors are calibrated in such a way that a shift in threshold voltage, due to a build-up of oxide-trapped charge, can be used to estimate the radiation dose. In order to estimate

The RADiation sensitive Field Effect Transistor (RADFET) has been conventionally used to measure radiation dose levels. These dose sensors are calibrated in such a way that a shift in threshold voltage, due to a build-up of oxide-trapped charge, can be used to estimate the radiation dose. In order to estimate the radiation dose level using RADFET, a wired readout circuit is necessary. Using the same principle of oxide-trapped charge build-up, but by monitoring the change in capacitance instead of threshold voltage, a wireless dose sensor can be developed. This RADiation sensitive CAPacitor (RADCAP) mounted on a resonant patch antenna can then become a wireless dose sensor. From the resonant frequency, the capacitance can be extracted which can be mapped back to estimate the radiation dose level. The capacitor acts as both radiation dose sensor and resonator element in the passive antenna loop. Since the MOS capacitor is used in passive state, characterizing various parameters that affect the radiation sensitivity is essential. Oxide processing technique, choice of insulator material, and thickness of the insulator, critically affect the dose response of the sensor. A thicker oxide improves the radiation sensitivity but reduces the dynamic range of dose levels for which the sensor can be used. The oxide processing scheme primarily determines the interface trap charge and oxide-trapped charge development; controlling this parameter is critical to building a better dose sensor.
ContributorsSrinivasan Gopalan, Madusudanan (Author) / Barnaby, Hugh (Thesis advisor) / Holbert, Keith E. (Committee member) / Yu, Hongyu (Committee member) / Arizona State University (Publisher)
Created2010
148495-Thumbnail Image.png
Description

This paper investigates near-field thermal radiation as the primary source of heat transfer between two parallel surfaces. This radiation takes place extremely close to the heated surfaces in study so the experimental set-up to be used will be done at the nanometer scale. The primary theory being investigated is that

This paper investigates near-field thermal radiation as the primary source of heat transfer between two parallel surfaces. This radiation takes place extremely close to the heated surfaces in study so the experimental set-up to be used will be done at the nanometer scale. The primary theory being investigated is that near-field radiation generates greater heat flux that conventional radiation governed by Planck’s law with maximum for blackbodies. Working with a phase shift material such as VO2 enables a switch-like effect to occur where the total amount of heat flux fluctuates as VO2 transitions from a metal to an insulator. In this paper, the theoretical heat flux and near-field radiation effect are modeled for a set-up of VO2 and SiO2 layers separated by different vacuum gaps. In addition, a physical experimental set-up is validated for future near-field radiation experiments.

ContributorsSluder, Nicole (Author) / Wang, Liping (Thesis director) / Wang, Ropert (Committee member) / Mechanical and Aerospace Engineering Program (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
148451-Thumbnail Image.png
Description

Rotary drums are tools used extensively in various prominent industries for their utility in heating and transporting particulate products. These processes are often inefficient and studies on heat transfer in rotary drums will reduce energy consumption as operating parameters are optimized. Research on this subject has been ongoing at ASU;

Rotary drums are tools used extensively in various prominent industries for their utility in heating and transporting particulate products. These processes are often inefficient and studies on heat transfer in rotary drums will reduce energy consumption as operating parameters are optimized. Research on this subject has been ongoing at ASU; however, the design of the rotary drum used in these studies is restrictive and experiments using radiation heat transfer have not been possible.<br/><br/>This study focuses on recounting the steps taken to upgrade the rotary drum setup and detailing the recommended procedure for experimental tests using radiant heat transfer upon completed construction of the new setup. To develop an improved rotary drum setup, flaws in the original design were analyzed and resolved. This process resulted in a redesigned drum heating system, an altered thinner drum, and a larger drum box. The recommended procedure for radiant heat transfer tests is focused on determining how particle size, drum fill level, and drum rotation rate impact the radiant heat transfer rate.

ContributorsMiller, Erik R (Author) / Emady, Heather (Thesis director) / Muhich, Christopher (Committee member) / Chemical Engineering Program (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
147964-Thumbnail Image.png
Description

In collaboration with Moog Broad Reach and Arizona State University, a<br/>team of five undergraduate students designed a hardware design solution for<br/>protecting flash memory data in a spaced-based radioactive environment. Team<br/>Aegis have been working on the research, design, and implementation of a<br/>Verilog- and Python-based error correction code using a Reed-Solomon method<br/>to

In collaboration with Moog Broad Reach and Arizona State University, a<br/>team of five undergraduate students designed a hardware design solution for<br/>protecting flash memory data in a spaced-based radioactive environment. Team<br/>Aegis have been working on the research, design, and implementation of a<br/>Verilog- and Python-based error correction code using a Reed-Solomon method<br/>to identify bit changes of error code. For an additional senior design project, a<br/>Python code was implemented that runs statistical analysis to identify whether<br/>the error correction code is more effective than a triple-redundancy check as well<br/>as determining if the presence of errors can be modeled by a regression model.

ContributorsSalls, Demetra Helen (Author) / Kozicki, Michael (Thesis director) / Hodge, Chris (Committee member) / Electrical Engineering Program (Contributor, Contributor) / School of Mathematical and Statistical Sciences (Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
141420-Thumbnail Image.png
Description

We generated 5-meter resolution SVF maps for two neighborhoods in Phoenix, Arizona to illustrate fine-scale variations of intra-urban horizon limitations due to urban form and vegetation.

ContributorsMiddel, Ariane (Author) / Lukasczyk, Jonas (Author) / Maciejewski, Ross (Author) / University of Kaiserslautern (Contributor)
Created2017-03-17
Description

Hermann Joseph Muller conducted three experiments in 1926 and 1927 that demonstrated that exposure to x-rays, a form of high-energy radiation, can cause genetic mutations, changes to an organism's genome, particularly in egg and sperm cells. In his experiments, Muller exposed fruit flies (Drosophila) to x-rays, mated the flies, and

Hermann Joseph Muller conducted three experiments in 1926 and 1927 that demonstrated that exposure to x-rays, a form of high-energy radiation, can cause genetic mutations, changes to an organism's genome, particularly in egg and sperm cells. In his experiments, Muller exposed fruit flies (Drosophila) to x-rays, mated the flies, and observed the number of mutations in the offspring. In 1927, Muller described the results of his experiments in &quot;Artificial Transmutation of the Gene&quot; and &quot;The Problem of Genic Modification&quot;. His discovery indicated the causes of mutation and for that research he later received the Nobel Prize in Physiology or Medicine in 1946. Muller's experiments with x-rays established that x-rays mutated genes and that egg and sperm cells are especially susceptible to such genetic mutations.

Created2017-03-07
173361-Thumbnail Image.png
Description

Hermann Joseph Muller studied the effects of x-ray radiation on genetic material in the US during the twentieth century. At that time, scientists had yet to determine the dangers that x-rays presented. In 1927, Muller demonstrated that x-rays, a form of high-energy radiation, can mutate the structure of genetic material.

Hermann Joseph Muller studied the effects of x-ray radiation on genetic material in the US during the twentieth century. At that time, scientists had yet to determine the dangers that x-rays presented. In 1927, Muller demonstrated that x-rays, a form of high-energy radiation, can mutate the structure of genetic material. Muller warned others of the dangers of radiation, advising radiologists to protect themselves and their patients from radiation. He also opposed the indiscriminate use of radiation in medical and industrial fields. In 1946, he received the Nobel Prize in Physiology or Medicine for his lifetime work involving radiation and genetic mutation. Muller&#39;s worked enabled scientists to directly study mutations without having to rely on naturally occurring mutations. Furthermore, Muller showed that radiation, even in small doses, leads to genetic mutations primarily in germ cells, cells which give rise to sperm and egg cells.

Created2017-05-25
173179-Thumbnail Image.png
Description

Curt Jacob Stern studied radiation and chromosomes in humans and fruit flies in the United States during the twentieth century. He researched the mechanisms of inheritance and of mitosis, or the process in which the chromosomes in the nucleus of a single cell, called the parent cell, split into identical

Curt Jacob Stern studied radiation and chromosomes in humans and fruit flies in the United States during the twentieth century. He researched the mechanisms of inheritance and of mitosis, or the process in which the chromosomes in the nucleus of a single cell, called the parent cell, split into identical sets and yield two cells, called daughter cells. Stern worked on the Drosophila melanogaster fruit fly, and he provided early evidence that chromosomes exchange genetic material during cellular reproduction. During World War II, he provided evidence for the harmful effects of radiation on developing organisms. That research showed that mutations can cause problems in developing fetuses and can lead to cancer. He helped explain how genetic material transmits from parent to progeny, and how it functions in developing organisms.

Created2017-06-23