Matching Items (5)
Filtering by
- Creators: Arizona State University
Description
Engineered nanoparticles (NP; 10-9 m) have found use in a variety of consumer goods and medical devices because of the unique changes in material properties that occur when synthesized on the nanoscale. Although many definitions for nanoparticle exist, from the perspective of size, nanoparticle is defined as particles with diameters less than 100 nm in any external dimension. Examples of their use include titanium dioxide added as a pigment in products intended to be ingested by humans, silicon dioxide NPs are used in foods as an anticaking agent, and gold or iron oxide NPs can be used as vectors for drug delivery or contrast agents for specialized medical imaging. Although the intended use of these NPs is often to improve human health, it has come to the attention of investigators that NPs can have unintended or even detrimental effects on the organism. This work describes one such unintended effect of NP exposure from the perspective of exposure via the oral route. First, this Dissertation will explain an event referred to as brush border disruption that occurred after nanoparticles interacted with an in vitro model of the human intestinal epithelium. Second, this Dissertation will identify and characterize several consumer goods that were shown to contain titanium dioxide that are intended to be ingested. Third, this Dissertation shows that sedimentation due to gravity does not artifactually result in disruption of brush borders as a consequence of exposure to food grade titanium dioxide in vitro. Finally, this Dissertation will demonstrate that iron oxide nanoparticles elicited similar effects after exposure to an in vitro brush border expressing model of the human placenta. Together, these data suggest that brush border disruption is not an artifact of the material/cell culture model, but instead represents a bona fide biological response as a result of exposure to nanomaterial.
ContributorsFaust, James J (Author) / Capco, David G. (Thesis advisor) / Ugarova, Tatiana (Committee member) / Chandler, Douglas (Committee member) / Baluch, Page (Committee member) / Herman, Richard (Committee member) / Arizona State University (Publisher)
Created2014
Description
Solar photovoltaic (PV) deployment has grown at unprecedented rates since the early 2000s. As the global PV market increases, so will the volume of decommissioned PV panels. Growing PV panel waste presents a new environmental challenge, but also unprecedented opportunities to create value and pursue new economic avenues. Currently, in the United States, there are no regulations for governing the recycling of solar panels and the recycling process varies by the manufacturer. To bring in PV specific recycling regulations, whether the PV panels are toxic to the landfills, is to be determined. Per existing EPA regulations, PV panels are categorized as general waste and are subjected to a toxicity characterization leaching procedure (TCLP) to determine if it contains any toxic metals that can possibly leach into the landfill. In this thesis, a standardized procedure is developed for extracting samples from an end of life PV module. A literature review of the existing regulations in Europe and other countries is done. The sample extraction procedure is tested on a crystalline Si module to validate the method. The extracted samples are sent to an independent TCLP testing lab and the results are obtained. Image processing technique developed at ASU PRL is used to detect the particle size in a broken module and the size of samples sent is confirmed to follow the regulation.
ContributorsKrishnamurthy, Raghav (Author) / Tamizhmani, Govindasamy (Thesis advisor) / Srinivasan, Devarajan (Committee member) / Kuitche, Joseph (Committee member) / Arizona State University (Publisher)
Created2017
Description
Two-dimensional quantum materials have garnered increasing interest in a wide
variety of applications due to their promising optical and electronic properties. These
quantum materials are highly anticipated to make transformative quantum sensors and
biosensors. Biosensors are currently considered among one of the most promising
solutions to a wide variety of biomedical and environmental problems including highly
sensitive and selective detection of difficult pathogens, toxins, and biomolecules.
However, scientists face enormous challenges in achieving these goals with current
technologies. Quantum biosensors can have detection with extraordinary sensitivity and
selectivity through manipulation of their quantum states, offering extraordinary properties
that cannot be attained with traditional materials. These quantum materials are anticipated
to make significant impact in the detection, diagnosis, and treatment of many diseases.
Despite the exciting promise of these cutting-edge technologies, it is largely
unknown what the inherent toxicity and biocompatibility of two-dimensional (2D)
materials are. Studies are greatly needed to lay the foundation for understanding the
interactions between quantum materials and biosystems. This work introduces a new
method to continuously monitor the cell proliferation and toxicity behavior of 2D
materials. The cell viability and toxicity measurements coupled with Live/Dead
fluorescence imaging suggest the biocompatibility of crystalline MoS2 and MoSSe
monolayers and the significantly-reduced cellular growth of defected MoTe2 thin films
and exfoliated MoS2 nanosheets. Results show the exciting potential of incorporating
kinetic cell viability data of 2D materials with other assay tools to further fundamental
understanding of 2D material biocompatibility.
variety of applications due to their promising optical and electronic properties. These
quantum materials are highly anticipated to make transformative quantum sensors and
biosensors. Biosensors are currently considered among one of the most promising
solutions to a wide variety of biomedical and environmental problems including highly
sensitive and selective detection of difficult pathogens, toxins, and biomolecules.
However, scientists face enormous challenges in achieving these goals with current
technologies. Quantum biosensors can have detection with extraordinary sensitivity and
selectivity through manipulation of their quantum states, offering extraordinary properties
that cannot be attained with traditional materials. These quantum materials are anticipated
to make significant impact in the detection, diagnosis, and treatment of many diseases.
Despite the exciting promise of these cutting-edge technologies, it is largely
unknown what the inherent toxicity and biocompatibility of two-dimensional (2D)
materials are. Studies are greatly needed to lay the foundation for understanding the
interactions between quantum materials and biosystems. This work introduces a new
method to continuously monitor the cell proliferation and toxicity behavior of 2D
materials. The cell viability and toxicity measurements coupled with Live/Dead
fluorescence imaging suggest the biocompatibility of crystalline MoS2 and MoSSe
monolayers and the significantly-reduced cellular growth of defected MoTe2 thin films
and exfoliated MoS2 nanosheets. Results show the exciting potential of incorporating
kinetic cell viability data of 2D materials with other assay tools to further fundamental
understanding of 2D material biocompatibility.
ContributorsTran, Michael, Ph.D (Author) / Tongay, Sefaattin (Thesis advisor) / Green, Matthew (Thesis advisor) / Muhich, Christopher (Committee member) / Arizona State University (Publisher)
Created2019
Description
This dissertation focuses on the structure-function relationships of nanomaterials (NMs) and some of their applications in environmental engineering. The aim is to investigate NMs of different surface chemistries and assess their interactions with biological models, evaluate the weathering impact and degradation parameters to improve polymer coatings, test their efficiency for contaminant removal and provide further understanding in the safe design of nanomaterials. Nanoecotoxicological risk assessment currently suffers from a lack of testing procedures adapted to nanomaterials. Graphene oxide (GO) is a carbon nanomaterial (CNM) that consists of a single layer of carbon atoms arranged in a hexagonal network. It is decorated with a high density of oxygen functional groups including epoxide and hydroxyl moieties on the basal planes and carboxylic and carbonyl groups at the edges. The changes in surface chemistry give GO unique properties that can be tailored for a function. Additionally, because of its simple synthesis and flexible chemistry, GO has been a popular building block of many composite CNMs. In environmental engineering, specifically, water treatment, GO has been studied by itself or as a composite for pollutant removal, biofouling reduction, and as an antimicrobial agent, just to name a few. Like GO, silver (Ag) is another NM widely used in water treatment for its biocidal properties. Despite the recent growth in this field, a fundamental understanding of the function-structure relationships in NMs is still progressing. Through a systematic set of experiments, the structure-properties-function and structure-properties-hazard relationships were investigated. These relationships can be used to establish guidelines to engineer “safe-by-design” functional nanomaterials, where materials are tailored to enhance their function while minimizing their inherent biological or environmental hazard.
ContributorsBarrios, Ana Cecilia (Author) / Perreault, Francois (Thesis advisor) / Abbaszadegan, Morteza (Committee member) / Conroy-Ben, Otakuye (Committee member) / Hua-Wang, Qing (Committee member) / Arizona State University (Publisher)
Created2021
Description
The livestreaming platform Twitch allows users to engage with one another and with content creators, known as streamers, in real-time, creating a cyclical pattern in which viewers and streamers simultaneously influence one another and co-construct the livestreams. While this active engagement has resulted in numerous benefits, it has also led to a surge in toxic behavior – actions meant to disrupt the flow of the livestream and harm the streamer and viewers involved. Toxic behavior is often directed at individuals who do not conform to the norms of a space or community. Because Twitch evolved out of an interest in video game spectatorship, and video game culture is burdened by the gamer stereotype, which typecasts gamers as young, white, male, and cishet, Twitch users who do not fit this identity category (e.g., women; black, Indigenous and people of color [BIPOC]; queer people; etc.) are labeled as threats to the perceived homogeneity of video game (and Twitch) culture. This project examines toxic discourses surrounding three women Twitch streamers, considering how the streamers’ performances, community-building efforts, and methods of regulation impact the levels and types of toxicity in their livestreams. A critical technocultural discourse analysis of 30 hours of livestreaming data reveals diverse approaches to managing toxicity. While all three streamers expressed that they neither liked nor approved of toxic behavior, their methods of addressing it varied greatly, from active channel moderators and explicit rules to public acts of moderation. Furthermore, the manifestation of toxicity differed across the three streamers’ communities, signaling that the streamers’ strategies impact not only users’ willingness to engage in this behavior but also other viewers’ responses to this issue. Twitch’s positioning as a service provider, which places most of burden of regulating user behavior on streamers, further complicates this problem, as streamers are largely responsible for enforcing Twitch’s rules as well as their own, leading to disparate and conflicting social norms and enforcement patterns. This project underscores the need for Twitch and its streamers to create standardized methods of behavior regulation that are inclusive and hold users accountable for their behavior.
ContributorsRines, Olivia (Author) / Adams, Karen (Thesis advisor) / SturtzSreetharan, Cindi (Committee member) / Florini, Sarah (Committee member) / Arizona State University (Publisher)
Created2021