Matching Items (17)
Filtering by
- Member of: Theses and Dissertations
Description
The accurate and fast determination of carbon dioxide (CO2) levels is critical for many health and environmental applications. For example, the analysis of CO2 levels in exhaled breath allows for the evaluation of systemic metabolism, perfusion, and ventilation, and provides the doctors and patients with a non-invasive and simple method to predict the presence and severity of asthma, and Chronic Obstructive Pulmonary Disease (COPD). Similarly, the monitoring of CO2 levels in the atmosphere allows for assessment of indoor air quality (IAQ) as the indoor CO2 levels have been proved to be associated with increased prevalence of certain mucous membrane and respiratory sick building syndrome (SBS) symptoms. A pocket-sized CO2 analyzer has been developed for real-time analysis of breath CO2 and environmental CO2. This CO2 analyzer is designed to comprise two key components including a fluidic system for efficient gas sample delivery and a colorimetric detection unit integrated into the fluidic system. The CO2 levels in the gas samples are determined by a disposable colorimetric sensor chip. The sensor chip is a novel composite based sensor that has been optimized to provide fast and reversible response to CO2 over a wide concentration range, covering the needs of both environmental and health applications. The sensor is immune to the presence of various interfering gases in ambient or expired air. The performance of the sensor in real-time breath-by-breath analysis has also been validated by a commercial CO2 detector. Furthermore, a 3D model was created to simulate fluid dynamics of breath and chemical reactions for CO2 assessment to achieve overall understanding of the breath CO2 detection process and further optimization of the device.
ContributorsZhao, Di (Author) / Forzani, Erica S (Thesis advisor) / Lin, Jerry Ys (Committee member) / Torres, Cesar (Committee member) / Tsow, Tsing (Committee member) / Xian, Xiaojun (Committee member) / Arizona State University (Publisher)
Created2014
Description
Monitoring of air pollutants is critical for many applications and studies. In
order to access air pollutants with high spatial and temporal resolutions, it is
necessary to develop an affordable, small size and weight, low power, high
sensitivity and selectivity, and wireless enable device that can provide real time
monitoring of air pollutants. Three different kind of such devices are presented, they
are targeting environmental pollutants such as volatile organic components (VOCs),
nitrogen dioxide (NO2) and ozone. These devices employ innovative detection
methods, such as quartz crystal tuning fork coated with molecularly imprinted
polymer and chemical reaction induced color change colorimetric sensing. These
portable devices are validated using the gold standards in the laboratory, and their
functionality and capability are proved during the field tests, make them great tools
for various air quality monitoring applications.
order to access air pollutants with high spatial and temporal resolutions, it is
necessary to develop an affordable, small size and weight, low power, high
sensitivity and selectivity, and wireless enable device that can provide real time
monitoring of air pollutants. Three different kind of such devices are presented, they
are targeting environmental pollutants such as volatile organic components (VOCs),
nitrogen dioxide (NO2) and ozone. These devices employ innovative detection
methods, such as quartz crystal tuning fork coated with molecularly imprinted
polymer and chemical reaction induced color change colorimetric sensing. These
portable devices are validated using the gold standards in the laboratory, and their
functionality and capability are proved during the field tests, make them great tools
for various air quality monitoring applications.
ContributorsChen, Cheng, Ph.D (Author) / Tao, Nongjian (Thesis advisor) / Kiaei, Sayfe (Committee member) / Zhang, Yanchao (Committee member) / Tsow, Tsing (Committee member) / Arizona State University (Publisher)
Created2014
Description
A new loop configuration capable of reducing power radiation magnitudes lower than conventional loops has been developed. This configuration is demonstrated for the case of two coaxial loops of 0.1 meter radius coupled via the magnetic reactive field. Utilizing electromagnetism theory, techniques from antenna design and a new near field design initiative, the ability to design a magnetic field has been investigated by using a full wave simulation tool. The method for realization is initiated from first order physics model, ADS and onto a full wave situation tool for the case of a non-radiating helical loop. The exploration into the design of a magnetic near field while mitigating radiation power is demonstrated using an real number of twists to form a helical wire loop while biasing the integer twisted loop in a non-conventional moebius termination. The helix loop setup as a moebius loop convention can also be expressed as a shorted antenna scheme. The 0.1 meter radius helix antenna is biased with a 1MHz frequency that categorized the antenna loop as electrically small. It is then demonstrated that helical configuration reduces the electric field and mitigates power radiation into the far field. In order to compare the radiated power reduction performance of the helical loop a shielded loop is used as a baseline for comparison. The shielded loop system of the same geometric size and frequency is shown to have power radiation expressed as -46.1 dBm. The power radiated mitigation method of the helix loop reduces the power radiated from the two loop system down to -98.72 dBm.
ContributorsMoreno, Fernando (Author) / Diaz, Rodolfo (Thesis advisor) / Aberle, James T., 1961- (Committee member) / Kozicki, Michael (Committee member) / Arizona State University (Publisher)
Created2015
Description
A wireless hybrid device for detecting volatile organic compounds (VOCs) has been developed. The device combines a highly selective and sensitive tuning-fork based detector with a pre-concentrator and a separation column. The selectivity and sensitivity of the tuning-fork based detector is optimized for discrimination and quantification of benzene, toluene, ethylbenzene, and xylenes (BTEX) via a homemade molecular imprinted polymer, and a specific detection and control circuit. The device is a wireless, portable, battery-powered, and cell-phone operated device. The device has been calibrated and validated in the laboratory and using selected ion flow tube mass spectrometry (SFIT-MS). The capability and robustness are also demonstrated in some field tests. It provides rapid and reliable detection of BTEX in real samples, including challenging high concentrations of interferents, and it is suitable for occupational, environmental health and epidemiological applications.
ContributorsChen, Zheng (Author) / Tao, Nongjian (Thesis advisor) / Chae, Junseok (Committee member) / Forzani, Erica (Committee member) / Arizona State University (Publisher)
Created2011
Description
High concentrations of carbon monoxide and particulate matter can cause respiratory disease, illness, and death in high doses. Air pollution is a concern in many urban areas of emerging markets that rely on outdated technologies for transportation and electricity generation; rural air quality is also a concern when noting the high prevalence of products of incomplete combustion resulting from open fires for cooking and heating. Monitoring air quality is an essential step to identifying these and other factors that affect air quality, and thereafter informing engineering and policy decisions to improve the quality of air. This study seeks to measure changes in air quality across spatial and temporal domains, with a specific focus on microclimates within an urban area. A prototype, low-cost air quality monitoring device has been developed to measure the concentrations of particulate matter, ozone, and carbon monoxide multiple times per minute. The device communicates data wirelessly via cell towers, and can run off-grid using a solar PV-battery system. The device can be replicated and deployed across urban regions for high-fidelity emissions monitoring to explore the effect of anthropogenic and environmental factors on intra-hour air quality. Hardware and software used in the device is described, and the wireless data communication protocols and capabilities are discussed.
ContributorsReilly, Kyle (Co-author) / Birner, Michael (Co-author) / Johnson, Nathan (Thesis director) / Gary, Kevin (Committee member) / Barrett, The Honors College (Contributor)
Created2015-05
Description
Defending against spoofing is an important part of security throughout the internet. With- out the ability to authenticate, within a certain confidence, that a person is in fact who they say are, can allow attackers to go unrecognized after performing an attack. It is much too easy for attackers today to hide their identity or pretend to be someone else through the means of spoof- ing. Researchers must focus their efforts on defenses that are scalable and effective in counter- ing spoofing. This thesis focuses on surveying different types of spoofing as well as attacks that lever- age spoofing with the hopes to hide the attacker's identity or leverage identity theft to perform an attack. It also looks at current defenses that hope to counter attacks that leverage spoofing and evaluates how realistic is to implement the defenses in terms of scalability and effective- ness. By surveying different attacks and defenses, researchers will be able to better focus their efforts on more effective and scalable defenses to spoofing and attacks that leverage spoofing.
ContributorsTorrence, Ryan Michael (Author) / Dasgupta, Partha (Thesis director) / Doupe, Adam (Committee member) / Barrett, The Honors College (Contributor) / Computer Science and Engineering Program (Contributor)
Created2015-05
Description
The belt component of a unique and novel wireless spinal cord stimulator (SCS) system was conceived, designed, made, and verified. This thesis details and documents all work from inception through preliminary verification and includes recommendations for future work. The purpose, scope, and objectives of the design and the thesis are introduced. Background literature is presented to provide context for the wireless SCS system as well as the belt component of the system. The product development process used to design the product is outlined. Requirements and constraints are determined from customer needs. Design options are considered and the best concept is selected. The design is made, optimized, and verified to meet the requirements. Future work for this design, outside the scope of this thesis, is discussed. Recommendations and conclusions following completion of the design are included as well.
ContributorsSimeunovic, Andrej (Author) / Zhu, Haolin (Thesis director) / Bakkaloglu, Bertan (Committee member) / Barrett, The Honors College (Contributor) / Mechanical and Aerospace Engineering Program (Contributor)
Created2014-05
Description
As technologies advance, so does the curiosity and exploration of humankind. There are many domains across this planet that are unexplored \u2014 the depths of Earth's ocean being one of the most predominant. While the ocean covers seventy percent of Earth's surface, a vast ninety-five percent of this realm remains untouched and unseen by the human eye. The biggest causality of this can be identified in the limitations of current technologies and the large expense associated with delving into these dangerous and uncharted areas. Underwater communication between unmanned devices is the solution to this problem. With the oceanic deployment of wirelessly connected unmanned underwater vehicles (UUVs), researchers can limit risk to human safely and retrieve invaluable oceanographic data from unimaginable depths. However, before this system can be physically deployed, the network topology and environmental interactions must be simulated. More specific to the application, how does attenuation of optical propagation degrade between transmissions? A widely used open source network simulator is the ns series: ns-1, ns-2, and ns-3. Ns-3 is the most recent version, and is a valuable tool for modeling network interactions. However, underwater simulation proposes a limitation \u2014 a three-dimensional consideration for pressure. To properly model this interaction, it is vital that an extension to ns-3 be provided in order to account for the affects pressure has on the propagation of a signal at varying depths.
ContributorsSowa, Ryan John (Author) / Richa, Andrea (Thesis director) / Saripalli, Srikanth (Committee member) / Zhou, Chenyang (Committee member) / Barrett, The Honors College (Contributor) / Computer Science and Engineering Program (Contributor)
Created2013-05
Description
An improved system for wireless neurostimulation was investigated through the design and development of sub-millimeter piezoelectric devices. The devices build on prior work in the lab, which was limited by device size and required surgical implantation. A method of manufacturing sub-mm devices was developed, and utilized to construct this new design. The device frequency response was characterized and its resonant modes and output voltages determined through a Fast Fourier Transform. The fundamental thickness mode frequency was found to be 15.4MHz with a corresponding 10.25mV amplitude, and a longitudinal resonant frequency of 3.1Mhz with a corresponding 2.2mV amplitude across a 50Ω resistor. The high miniaturization of the device holds promise for future work for creating an injectable, wireless system for the treatment of neurological disorders.
ContributorsCatchings, Michael Thomas (Author) / Towe, Bruce (Thesis director) / Muthuswamy, Jitendran (Committee member) / Harrington Bioengineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
Description
Small wireless cells have the potential to overcome bottlenecks in wireless access through the sharing of spectrum resources. A novel access backhaul network architecture based on a Smart Gateway (Sm-GW) between the small cell base stations, e.g., LTE eNBs, and the conventional backhaul gateways, e.g., LTE Servicing/Packet Gateways (S/P-GWs) has been introduced to address the bottleneck. The Sm-GW flexibly schedules uplink transmissions for the eNBs. Based on software defined networking (SDN) a management mechanism that allows multiple operator to flexibly inter-operate via multiple Sm-GWs with a multitude of small cells has been proposed. This dissertation also comprehensively survey the studies that examine the SDN paradigm in optical networks. Along with the PHY functional split improvements, the performance of Distributed Converged Cable Access Platform (DCCAP) in the cable architectures especially for the Remote-PHY and Remote-MACPHY nodes has been evaluated. In the PHY functional split, in addition to the re-use of infrastructure with a common FFT module for multiple technologies, a novel cross functional split interaction to cache the repetitive QAM symbols across time at the remote node to reduce the transmission rate requirement of the fronthaul link has been proposed.
ContributorsThyagaturu, Akhilesh Thyagaturu (Author) / Reisslein, Martin (Thesis advisor) / Seeling, Patrick (Committee member) / Zhang, Yanchao (Committee member) / Tepedelenlioğlu, Cihan (Committee member) / Arizona State University (Publisher)
Created2017