Matching Items (16)
Filtering by
- All Subjects: Aerospace Engineering
- Genre: Masters Thesis
- Creators: Takahashi, Timothy
Description
This thesis uses an aircraft aerodynamic model and propulsion data, which
represents a configuration similar to the Airbus A320, to perform trade studies to understand the weight and configuration effects of “out-of-trim” flight during takeoff, cruise, initial approach, and balked landing. It is found that flying an aircraft slightly above the angle of attack or pitch angle required for a trimmed, stabilized flight will cause the aircraft to lose speed rapidly. This effect is most noticeable for lighter aircraft and when one engine is rendered inoperative. In the event of an engine failure, if the pilot does not pitch the nose of the aircraft down quickly, speed losses are significant and potentially lead to stalling the aircraft. Even when the risk of stalling the aircraft is small, the implications on aircraft climb performance, obstacle clearance, and acceleration distances can still become problematic if the aircraft is not flown properly. When the aircraft is slightly above the trimmed angle of attack, the response is shown to closely follow the classical phugoid response where the aircraft will trade speed and altitude in an oscillatory manner. However, when the pitch angle is slightly above the trimmed condition, the aircraft does not show this phugoid pattern but instead just loses speed until it reaches a new stabilized trajectory, never having speed and altitude oscillate. In this event, the way a pilot should respond to both events is different and may cause confusion in the cockpit.
represents a configuration similar to the Airbus A320, to perform trade studies to understand the weight and configuration effects of “out-of-trim” flight during takeoff, cruise, initial approach, and balked landing. It is found that flying an aircraft slightly above the angle of attack or pitch angle required for a trimmed, stabilized flight will cause the aircraft to lose speed rapidly. This effect is most noticeable for lighter aircraft and when one engine is rendered inoperative. In the event of an engine failure, if the pilot does not pitch the nose of the aircraft down quickly, speed losses are significant and potentially lead to stalling the aircraft. Even when the risk of stalling the aircraft is small, the implications on aircraft climb performance, obstacle clearance, and acceleration distances can still become problematic if the aircraft is not flown properly. When the aircraft is slightly above the trimmed angle of attack, the response is shown to closely follow the classical phugoid response where the aircraft will trade speed and altitude in an oscillatory manner. However, when the pitch angle is slightly above the trimmed condition, the aircraft does not show this phugoid pattern but instead just loses speed until it reaches a new stabilized trajectory, never having speed and altitude oscillate. In this event, the way a pilot should respond to both events is different and may cause confusion in the cockpit.
ContributorsDelisle, Mathew Robert (Author) / Takahashi, Timothy (Thesis advisor) / White, Daniel (Committee member) / Niemczyk, Mary (Committee member) / Arizona State University (Publisher)
Created2018
Description
This study identifies the influence that leading-edge shape has on the aerodynamic characteristics of a wing using surface far-field and near-field analysis. It examines if a wake survey is the appropriate means for measuring profile drag and induced drag. The paper unveils the differences between sharp leading-edge and blunt leading-edge wings with the tools of pressure loop, chordwise pressure distribution, span load plots and with wake integral computations. The analysis was performed using Computational Fluid Dynamics (CFD), vortex lattice potential flow code (VORLAX), and a few wind-tunnels runs to acquire data for comparison. This study found that sharp leading-edge wings have less leading-edge suction and higher drag than blunt leading-edge wings.
The blunt leading-edge wings have less drag because the normal vector of the surface in the front section of the airfoil develops forces at opposed skin friction. The shape of the leading edge, in conjunction with the effect of viscosity, slightly alter the span load; both the magnitude of the lift and the transverse distribution. Another goal in this study is to verify the veracity of wake survey theory; the two different leading-edge shapes reveals the shortcoming of Mclean’s equation which is only applicable to blunt leading-edge wings.
The blunt leading-edge wings have less drag because the normal vector of the surface in the front section of the airfoil develops forces at opposed skin friction. The shape of the leading edge, in conjunction with the effect of viscosity, slightly alter the span load; both the magnitude of the lift and the transverse distribution. Another goal in this study is to verify the veracity of wake survey theory; the two different leading-edge shapes reveals the shortcoming of Mclean’s equation which is only applicable to blunt leading-edge wings.
ContributorsOu, Che Wei (Author) / Takahashi, Timothy (Thesis advisor) / Herrmann, Marcus (Committee member) / Huang, Huei-Ping (Committee member) / Arizona State University (Publisher)
Created2019
Description
In previous work, the effects of power extraction for onboard electrical equipment and flight control systems were studied to determine which turbine shaft (i.e. high power shaft vs low power shaft) is best suited for power extraction. This thesis will look into an alternative option, a three-spool design with a high-pressure turbine, low-pressure turbine, and a turbine dedicated to driving the fan. One of the three-spool turbines is designed to be a vaneless counter-rotating turbine. The off-design performance of this new design will be compared to the traditional two-spool design to determine if the additional spool is a practical alternative to current designs for high shaft horsepower extraction requirements. Upon analysis, this thesis has shown that a three-spool engine with a vaneless counter-rotating stage has worse performance characteristics than traditional two-spool designs for UAV systems.
ContributorsBurgett, Luke Michael (Author) / Takahashi, Timothy (Thesis advisor) / Dahm, Werner (Committee member) / Trimble, Steve (Committee member) / Arizona State University (Publisher)
Created2019
Description
There are many computer aided engineering tools and software used by aerospace engineers to design and predict specific parameters of an airplane. These tools help a design engineer predict and calculate such parameters such as lift, drag, pitching moment, takeoff range, maximum takeoff weight, maximum flight range and much more. However, there are very limited ways to predict and calculate the minimum control speeds of an airplane in engine inoperative flight. There are simple solutions, as well as complicated solutions, yet there is neither standard technique nor consistency throughout the aerospace industry. To further complicate this subject, airplane designers have the option of using an Automatic Thrust Control System (ATCS), which directly alters the minimum control speeds of an airplane.
This work addresses this issue with a tool used to predict and calculate the Minimum Control Speed on the Ground (VMCG) as well as the Minimum Control Airspeed (VMCA) of any existing or design-stage airplane. With simple line art of an airplane, a program called VORLAX is used to generate an aerodynamic database used to calculate the stability derivatives of an airplane. Using another program called Numerical Propulsion System Simulation (NPSS), a propulsion database is generated to use with the aerodynamic database to calculate both VMCG and VMCA.
This tool was tested using two airplanes, the Airbus A320 and the Lockheed Martin C130J-30 Super Hercules. The A320 does not use an Automatic Thrust Control System (ATCS), whereas the C130J-30 does use an ATCS. The tool was able to properly calculate and match known values of VMCG and VMCA for both of the airplanes. The fact that this tool was able to calculate the known values of VMCG and VMCA for both airplanes means that this tool would be able to predict the VMCG and VMCA of an airplane in the preliminary stages of design. This would allow design engineers the ability to use an Automatic Thrust Control System (ATCS) as part of the design of an airplane and still have the ability to predict the VMCG and VMCA of the airplane.
This work addresses this issue with a tool used to predict and calculate the Minimum Control Speed on the Ground (VMCG) as well as the Minimum Control Airspeed (VMCA) of any existing or design-stage airplane. With simple line art of an airplane, a program called VORLAX is used to generate an aerodynamic database used to calculate the stability derivatives of an airplane. Using another program called Numerical Propulsion System Simulation (NPSS), a propulsion database is generated to use with the aerodynamic database to calculate both VMCG and VMCA.
This tool was tested using two airplanes, the Airbus A320 and the Lockheed Martin C130J-30 Super Hercules. The A320 does not use an Automatic Thrust Control System (ATCS), whereas the C130J-30 does use an ATCS. The tool was able to properly calculate and match known values of VMCG and VMCA for both of the airplanes. The fact that this tool was able to calculate the known values of VMCG and VMCA for both airplanes means that this tool would be able to predict the VMCG and VMCA of an airplane in the preliminary stages of design. This would allow design engineers the ability to use an Automatic Thrust Control System (ATCS) as part of the design of an airplane and still have the ability to predict the VMCG and VMCA of the airplane.
ContributorsHadder, Eric Michael (Author) / Takahashi, Timothy (Thesis advisor) / Mignolet, Marc (Committee member) / White, Daniel (Committee member) / Arizona State University (Publisher)
Created2016
Description
In today’s day and age, the use of automated technology is becoming increasingly prevalent. Throughout the aerospace industry, we see the use of automated systems in manufacturing, testing, and, progressively, in design. This thesis focuses on the idea of automated structural design that can be directly coupled with parametric Computer-Aided Drafting (CAD) and used to support aircraft conceptual design. This idea has been around for many years; however, with the advancement of CAD technology, it is becoming more realistic. Having the ability to input design parameters, analyze the structure, and produce a basic CAD model not only saves time in the design process but provides an excellent platform to communicate ideas. The user has the ability to change parameters and quickly determine the effect on the structure. Coupling this idea with automated parametric CAD provides visual verification and a platform to export into Finite Element Analysis (FEA) for further verification.
ContributorsAnderson, Benjamin Kyle (Author) / Takahashi, Timothy (Thesis advisor) / Bolukbasi, Akif (Committee member) / Patel, Jay (Committee member) / Arizona State University (Publisher)
Created2017
Description
This thesis describes the extension of an aircraft-style time-step integrating mission performance simulation to address aero-spaceplane design challenges. The result is a computationally lean program compatible with current Multi-Disciplinary Optimization schemes to assist in the conceptual design of hypersonic vehicles. To do this the starting aircraft style “Mission Code” required enhancements to the typical point-mass simulation for high altitude and high Mach flight. Stability parameters and the rigid-body modes of Short-Period and Dutch-Roll are tracked to understand time-domain limits to aerodynamic control, along with monitoring the Lateral Control Departure Parameter to ensure that the aircraft is not prone to spin. Additionally, experience has shown that for high Mach Number flight designers must consider aerothermodynamic effects early in the vehicle design process, and thus, an engineering level aerothermodynamic model is included. Comparisons to North American X-15 flight test datasets demonstrate the validity of this method in that application, and trade studies conducted show the utility of this application.
ContributorsGriffin, Jack Aidan (Author) / Takahashi, Timothy (Thesis advisor) / Dahm, Werner (Committee member) / Rodi, Patrick (Committee member) / Arizona State University (Publisher)
Created2022
Description
As the push to develop ever more efficient aircraft increases, the use of lightweight composite materials to meet this push has increased. Traditional aircraft structural component sizing has revolved around the tensile yield strength of materials. Since composite materials excel in tensile strength, these traditional sizing tools provide overly optimistic weight reduction predictions. Furthermore, composite materials, in general, are weak under compression and shear. Thus, proper structural sizing yields heavier-than-expected designs. Nevertheless, a wing using thin, lightweight composites in the primary load-bearing components significantly impacts its static aeroelastic properties. These thin structures have a decreased flexural rigidity, making them more susceptible to bending. The bending of swept wings decreases the design wing twist and dihedral angle, potentially impacting the aerodynamic performance and the lateral stability and control, respectively. This work aims to determine what, if any, are the effects of excessive static aeroelastic properties on the aerodynamic performance of an aircraft. Does the perceived gain in the theoretical reduction in structural weight outweigh the potential reduction in aerodynamic performance?
ContributorsWebb, Benjamin David (Author) / Takahashi, Timothy (Thesis advisor) / Herrmann, Marcus (Committee member) / Perez, Ruben (Committee member) / Arizona State University (Publisher)
Created2022
Description
The design and development process of high-lift systems for commercial transport aircraft has been historically heavily dependent on extensive experimental testing. Whether this testing be in wind tunnels or during aircraft testing, the number and extent of high-lift system variations that can be tested are limited. With technology advancements, analyzing the complex flow around high lift systems using detailed computational fluid dynamics (CFD) has become more common; but, CFD has limitations due to the computational costs for such analysis. An empirical approach can be taken to analyze such systems, but the insight gained from such methods is often limited to a main contributing factor. While these methods often produce reasonable solutions, they fail in showing, and many times overshadow, the important minor effects within complex systems.
This thesis aims to present insight on the need and design of multi-element high-lift systems by using a tool developed which utilizes a legacy vortex lattice potential flow code and methods described in classical aerodynamic literature. With this tool, numerous variations of high lift devices were studied to understand why commercial transport aircraft require a high-lift system. Furthermore, variations of complete high-lift systems were also studied to understand why certain design decisions were made on existing commercial transport aircraft. Ultimately, enough insight was obtained to proceed to design a functioning high-lift system for a commercial transport aircraft capable of meeting all established requirements and exhibit favorable flow separation conditions.
ContributorsMartinez Rodriguez, Gabino (Author) / Takahashi, Timothy (Thesis advisor) / Herrmann, Marcus (Committee member) / Sobester, Andras (Committee member) / Arizona State University (Publisher)
Created2021
Description
This thesis investigates the configurations needed to demonstrate positive lateraldirectional controllability across the flight envelope of a hypersonic vehicle. Itexamines the NASA Space Shuttle Orbiter as a baseline reference configuration, as it
was a successful hypersonic vehicle. However, the Orbiter had limited high-speed
maneuvering capability; it relied on reaction-control jets to augment controllability
due to a strong tendency for its aerodynamics to “control couple.” It was seen that
many problems associated with the control of the hypersonic Orbiter are due to its
slender configuration. This work relies upon the Evolved-Bihrle-Weissman chart as
an accurate indicator of lateral-directional stability and controllability. The also
explores variant configurations of larger wing tip verticals to explore what
configuration changes are needed to reduce dependence on reaction controls.
ContributorsHoopes, Connor Smith (Author) / Takahashi, Timothy (Thesis advisor) / Dahm, Werner (Committee member) / Perez, Ruben (Committee member) / Arizona State University (Publisher)
Created2023
Description
This thesis aims to determine how finite wing aerodynamic loads change in proximity to the ground. In this study, the primary design tool is an inviscid panel method code, VORLAX.
The validation tool is a commercial volume grid CFD package, ANSYS FLUENT. I use VORLAX
to simulate wings with different incidences and aspect ratios to look at how ground effect
impacts spanwise loading and incipient flow separation. Then the results were compared to
widely published equations such as McCormick, Torenbeek, and Hoerner & Borst. Because I
found that these “famous” equations function best only for specific conditions, I propose a
new empirical equation to estimate ground effect lift as a function of aspect ratio and
incidence. Using Stratford’s method to predict signs of flow separation in the inviscid
solutions, I found that variations in the height above the ground were not significant enough
to change the stall angle of low aspect ratio wings. I did find early signs of flow separation
with increasing aspect ratio. I observe significant changes in spanwise loading when in
ground effect; as I narrow the gap, the transverse loading builds higher near the center of the
wing. These effects were more apparent in wings with smaller aspect ratio; higher aspect
ratio wings experience a higher loading gradient near the tips in proximity to the ground. I
found that high aspect ratio wings have a smaller stall angle compared to that of lower
aspect ratio wings; these trends are consistent between the potential flow solution and the
volume grid CFD viscous solution.
ContributorsValenzuela, Jose Vanir (Author) / Takahashi, Timothy (Thesis advisor) / Dahm, Werner (Committee member) / Huang, Huei-Ping (Committee member) / Arizona State University (Publisher)
Created2024