Matching Items (13)
Filtering by
- Creators: Barrett, The Honors College
- Creators: Kavazanjian, Edward
- Creators: Allenby, Braden
Description
Cardiac tissue engineering is an emerging field that has the potential to regenerate and repair damaged cardiac tissues after myocardial infarction. Numerous studies have introduced hydrogel-based cardiac tissue constructs featuring suitable microenvironments for cell growth along with precise surface topographies for directed cell organization. Despite significant progress, previously developed cardiac tissue constructs have suffered from electrically insulated matrices and low cell retention. To address these drawbacks, we fabricated micropatterned hybrid hydrogel constructs (uniaxial microgrooves with 50 µm with) using a photocrosslinkable gelatin methacrylate (GelMA) hydrogel incorporated with gold nanorods (GNRs). The electrical impedance results revealed a lower impedance in the GelMA-GNR constructs versus the pure GelMA constructs. Superior electrical conductivity of GelMA-GNR hydrogels (due to incorporation of GNRs) enabled the hybrid tissue constructs to be externally stimulated using a pulse generator. Furthermore, GelMA-GNR tissue hydrogels were tested to investigate the biological characteristics of cultured cardiomyocytes. The F-actin fiber analysis results (area coverage and alignment indices) revealed higher directed (uniaxial) cytoskeleton organization of cardiac cells cultured on the GelMA-GNR hydrogel constructs in comparison to pure GelMA. Considerable increase in the coverage area of cardiac-specific markers (sarcomeric α-actinin and connexin 43) were observed on the GelMA-GNR hybrid constructs compared to pure GelMA hydrogels. Despite substantial dissimilarities in cell organization, both pure GelMA and hybrid GelMA-GNR hydrogel constructs provided a suitable microenvironment for synchronous beating of cardiomyocytes.
ContributorsMoore, Nathan Allen (Author) / Nikkhah, Mehdi (Thesis director) / Smith, Barbara (Committee member) / Harrington Bioengineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
3D printing has recently become a popular manufacturing process and the goal of the project was to take that process to the kitchen. This was done by utilizing existing knowledge of the culinary process of "spherification", by which a liquid is encapsulated in an edible shell, and combining it with the hydrogel research advancements in tissue engineering to make robust fibers. A co-flow nozzle was constructed and the two fluids needed for spherification were flowed in various configurations to create different fibers. By outlining a stability regime and measuring the outer diameters for both regular and reverse spherification, the optimal method of production and fibers that would be suitable for 3D printing were discovered. The results of the experiments can be used to begin 3D printing edible 2D patterns and eventually 3D structures.
ContributorsSchott, Christopher David (Author) / Rykaczewski, Konrad (Thesis director) / Herrmann, Marcus (Committee member) / Barrett, The Honors College (Contributor) / Mechanical and Aerospace Engineering Program (Contributor)
Created2015-05
Description
Heterogeneous tissues are composed of chemical and physical gradients responsible for transferring load from one tissue type to another, through the thickness or the length of the tissue. Musculoskeletal tissues include these junctions, such as the tendon-bone and ligament-bone, which consist of an alignment gradient through the length of the interfacial regions. These junctions are imperative for transferring mechanical loadings between dissimilar tissues. Engineering a proper scaffold that mimics the native architecture of these tissues to prompt proper repair after an interfacial injury has been difficult to fabricate within tissue engineering. Electrospinning is a common technique for fabricating nanofibrous scaffolds that can mimic the structure of the native extracellular matrix (ECM). However, current electrospinning techniques do not easily allow for the replication of the chemical and physical gradients present in musculoskeletal interfacial tissues. In this work, a novel magnetic electrospinning technique was developed to fabricate polycaprolactone (PCL) nanofibrous scaffolds that recapitulate the gradient alignment structure of the tendon-bone junction. When exposed to the natural magnetic field from a permanent magnet, PCL fibers innately aligned near the magnet with unalignment at distances further away from the magnetic field.
ContributorsGualtieri, Alessandra Villa (Author) / Holloway, Julianne (Thesis director) / Green, Matthew (Committee member) / Chemical Engineering (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
Description
Currently conventional Subtitle D landfills are the primary means of disposing of our waste in the United States. While this method of waste disposal aims at protecting the environment, it does so through the use of liners and caps that effectively freeze the breakdown of waste. Because this method can keep landfills active, and thus a potential groundwater threat for over a hundred years, I take an in depth look at the ability of bioreactor landfills to quickly stabilize waste. In the thesis I detail the current state of bioreactor landfill technologies, assessing the pros and cons of anaerobic and aerobic bioreactor technologies. Finally, with an industrial perspective, I conclude that moving on to bioreactor landfills as an alternative isn't as simple as it may first appear, and that it is a contextually specific solution that must be further refined before replacing current landfills.
ContributorsWhitten, George Avery (Author) / Kavazanjian, Edward (Thesis director) / Allenby, Braden (Committee member) / Houston, Sandra (Committee member) / Civil, Environmental and Sustainable Engineering Programs (Contributor) / Barrett, The Honors College (Contributor)
Created2013-05
Description
Lab-grown food products of animal cell origin, now becoming popularly coined as, ‘Cellular Agriculture’ is a revolutionary breakthrough technology that has the potential to penetrate the lives of every American or citizen of the world. It is important to recognize that the impetus for developing this technology is fueled by environmental concerns with climate change, rising geopolitical instability, and population growth projections, where farm-grown food has now become a growing national security issue. Notwithstanding its potential, in addition to the necessary technological innovation and economic scalability, the market success of cellular agriculture will depend greatly on regulatory oversight by multiple government agencies without which it can cause undue harm to individuals, populations, and the environment. Thus, it is critical for those appropriate United States governing bodies to ensure that the technology being developed is both safe and of an acceptable quality for human consumption and has no adverse environmental impact. As such, animal foods, derived from farms, previously regulated almost exclusively by the United States Department of Agriculture (USDA) are now being regulated under a joint formal agreement between the US Food and Drug Administration (US FDA) and the USDA if derived from the lab, i.e., lab-grown animal foods. The main reason for joint oversight between the FDA and the USDA is that the FDA has developed the in-house expertise to oversee primary cell harvesting and cell storage, as well as, cell growth and differentiation for the development of 3D-engineered tissues intended for tissue and organ replacement for the emerging field of regenerative medicine. As such, the FDA has been given the authority to oversee the ‘front end’ of lab-grown food processes which relies on the very same processes utilized in engineered human tissues to produce food-grade engineered tissues. Oversight then transitions to the USDA-FSIS (Food Safety and Inspection Service) during the harvesting stage of the cell culture process. The USDA-FSIS then oversees the further production and labeling of these products. Included in the agreement is the understanding that both bodies are responsible for communicating necessary information to each other and collaboratively developing new regulatory actions as needed. However, there currently lacks clarity on some topics regarding certain legal, ethical, and scientific issues. Lab-grown meat products require more extensive regulation than farm-grown animal food products to ensure that they are safe and nutritious for consumption. To do this, CFSAN can create new classes of lab-grown foods, such as ‘lab-grown USDA foods,’ ‘lab-grown non-USDA foods,’ ‘lab-grown extinct foods,’ ‘lab-grown human food tissues,’ and ‘medically activated lab-grown foods.’
ContributorsBanen, Samuel (Author) / Pizziconi, Vincent (Thesis director) / Feigal, David (Committee member) / Barrett, The Honors College (Contributor) / Harrington Bioengineering Program (Contributor) / School of Molecular Sciences (Contributor)
Created2023-05
Characterization and Manipulation of Microbiomes From Arid Landfills for Improved Methane Production
Description
Environmentally harmful byproducts from solid waste’s decomposition, including methane (CH4) emissions, are managed through standardized landfill engineering and gas-capture mechanisms. Yet only a limited number of studies have analyzed the development and composition of Bacteria and Archaea involved in CH4 production from landfills. The objectives of this research were to compare microbiomes and bioactivity from CH4-producing communities in contrasting spatial areas of arid landfills and to tests a new technology to biostimulate CH4 production (methanogenesis) from solid waste under dynamic environmental conditions controlled in the laboratory. My hypothesis was that the diversity and abundance of methanogenic Archaea in municipal solid waste (MSW), or its leachate, play an important role on CH4 production partially attributed to the group’s wide hydrogen (H2) consumption capabilities. I tested this hypothesis by conducting complementary field observations and laboratory experiments. I describe niches of methanogenic Archaea in MSW leachate across defined areas within a single landfill, while demonstrating functional H2-dependent activity. To alleviate limited H2 bioavailability encountered in-situ, I present biostimulant feasibility and proof-of-concepts studies through the amendment of zero valent metals (ZVMs). My results demonstrate that older-aged MSW was minimally biostimulated for greater CH4 production relative to a control when exposed to iron (Fe0) or manganese (Mn0), due to highly discernable traits of soluble carbon, nitrogen, and unidentified fluorophores found in water extracts between young and old aged, starting MSW. Acetate and inhibitory H2 partial pressures accumulated in microcosms containing old-aged MSW. In a final experiment, repeated amendments of ZVMs to MSW in a 600 day mesocosm experiment mediated significantly higher CH4 concentrations and yields during the first of three ZVM injections. Fe0 and Mn0 experimental treatments at mesocosm-scale also highlighted accelerated development of seemingly important, but elusive Archaea including Methanobacteriaceae, a methane-producing family that is found in diverse environments. Also, prokaryotic classes including Candidatus Bathyarchaeota, an uncultured group commonly found in carbon-rich ecosystems, and Clostridia; All three taxa I identified as highly predictive in the time-dependent progression of MSW decomposition. Altogether, my experiments demonstrate the importance of H2 bioavailability on CH4 production and the consistent development of Methanobacteriaceae in productive MSW microbiomes.
ContributorsReynolds, Mark Christian (Author) / Cadillo-Quiroz, Hinsby (Thesis advisor) / Krajmalnik-Brown, Rosa (Thesis advisor) / Wang, Xuan (Committee member) / Kavazanjian, Edward (Committee member) / Arizona State University (Publisher)
Created2022
Description
Zero-Valent Metals (ZVM) are highly reactive materials and have been proved to be effective in contaminant reduction in soils and groundwater remediation. In fact, zero-Valent Iron (ZVI) has proven to be very effective in removing, particularly chlorinated organics, heavy metals, and odorous sulfides. Addition of ZVI has also been proved in enhancing the methane gas generation in anaerobic digestion of activated sludge. However, no studies have been conducted regarding the effect of ZVM stimulation to Municipal Solid Waste (MSW) degradation. Therefore, a collaborative study was developed to manipulate microbial activity in the landfill bioreactors to favor methane production by adding ZVMs. This study focuses on evaluating the effects of added ZVM on the leachate generated from replicated lab scale landfill bioreactors. The specific objective was to investigate the effects of ZVMs addition on the organic and inorganic pollutants in leachate. The hypothesis here evaluated was that adding ZVM including ZVI and Zero Valent Manganese (ZVMn) will enhance the removal rates of the organic pollutants present in the leachate, likely by a putative higher rate of microbial metabolism. Test with six (4.23 gallons) bioreactors assembled with MSW collected from the Salt River Landfill and Southwest Regional Landfill showed that under 5 grams /liter of ZVI and 0.625 grams/liter of ZVMn additions, no significant difference was observed in the pH and temperature data of the leachate generated from these reactors. The conductivity data suggested the steady rise across all reactors over the period of time. The removal efficiency of sCOD was highest (27.112 mg/lit/day) for the reactors added with ZVMn at the end of 150 days for bottom layer, however the removal rate was highest (16.955 mg/lit/day) for ZVI after the end of 150 days of the middle layer. Similar trends in the results was observed in TC analysis. HPLC study indicated the dominance of the concentration of heptanoate and isovalerate were leachate generated from the bottom layer across all reactors. Heptanoate continued to dominate in the ZVMn added leachate even after middle layer injection. IC analysis concluded the chloride was dominant in the leachate generated from all the reactors and there was a steady increase in the chloride content over the period of time. Along with chloride, fluoride, bromide, nitrate, nitrite, phosphate and sulfate were also detected in considerable concentrations. In the summary, the addition of the zero valent metals has proved to be efficient in removal of the organics present in the leachate.
ContributorsPandit, Gandhar Abhay (Author) / Cadillo – Quiroz, Hinsby (Thesis advisor) / Olson, Larry (Thesis advisor) / Boyer, Treavor (Committee member) / Arizona State University (Publisher)
Created2019
Description
Tissue engineering scaffold fabrication methods often have tradeoffs associated with them that prevent one method from fulfilling all design requirements of a desired scaffold. This undergraduate thesis seeks to combine 3D printing and electrospinning tissue engineering fabrication methods into a hybrid fabrication method that can potentially fulfill more design requirements than each method alone. The hybrid scaffolds were made by inserting electrospun scaffolds between layers of 3D printed scaffolds of increasing print temperature and effects on adhesion and mechanical properties were characterized. The fabrication method proved to be feasible and print temperature affected both adhesion and mechanical properties of the scaffolds. A positive, non-linear relationship was seen between print temperature and adhesion and resulting force. Insertion of electrospun mats led to increased damping of scaffolds. Evidence from characterization indicated factors other than print temperature were likely contributing to adhesion and mechanical properties. If studied further, this fabrication method could potentially be used to improve overall structure and regenerative potential of tissue engineering scaffolds.
ContributorsCornella, Joseph Paul (Author) / Pizziconi, Vincent (Thesis director) / McPhail, Michael J (Committee member) / School of Music (Contributor) / School of Life Sciences (Contributor) / Barrett, The Honors College (Contributor)
Created2020-05
Description
The tendon-bone junction is essential for allowing humans to transfer mechanical loads during activities. When injury does occur to this important area, current surgical techniques improperly bypass important physical and chemical gradients and do not restore proper function. It is essential to create tissue engineered scaffolds that create proper models for the region and induce healing responses for repair. To advance research into these scaffolds, electrospinning fibers and hydrogels made of norbornene functionalized hyaluronic acid (NorHA) were used to promote bone growth by adhering calcium to the material. To further improve calcium adherence, which is indicative of bone regions, a mineralization peptide was allowed to soak through the fibers. NorHA proved to be a suitable material for biomineralization experiments, showing slow calcium adherence within the first hour before accelerating in adherence over 24 hours in both fibers and hydrogels. When the mineralization peptide was implemented calcium adherence on fibers increased nearly eight times within the first 15 minutes of experimentation.
ContributorsCasey, Nathan Robert (Author) / Holloway, Julianne (Thesis director) / Tindell, Raymond (Committee member) / Fumasi, Fallon (Committee member) / Chemical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2020-05
Description
Musculoskeletal heterogenous tissues are crucial for dissipating mechanical load during physical activity. Modern procedures to repair these tissues have proven inadequate to restore full functionality, thus there is a need for alternative reconstructive methods. Consequently, tissue engineered scaffolds can mimic the native structure of tissues and trigger a healing response. Heterogenous tissues like the tendon-bone junction consist of an interdigitated fiber alignment gradient from the tendon to the bone. It has been shown that electrospun fiber alignment gradients can be fabricated from the incorporation of magnetic fields. In this study, manipulating electrostatic and magnetic interactions from various electrospinning collector arrangements were investigated for creating an interdigitated fiber alignment gradient. The collector arrangement consisting of a magnet overlaid with razor cut aluminum foil proved to provide increased control over the interfacial shape. The rapid transition at the interfacial region was verified with brightfield microscopy revealing an interdigitated gradient from highly aligned fibers to unaligned fibers.
ContributorsBusselle, Lincoln Pierce (Author) / Holloway, Julianne (Thesis director) / Tindell, Raymond (Committee member) / Chemical Engineering Program (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2020-05