Matching Items (4)
Filtering by

Clear all filters

137262-Thumbnail Image.png
Description
The thesis is an investigation on current regulations of commercial aircraft landing and take-off procedures and an analysis of potential weaknesses within the regulatory system for commercial aerospace. To determine such flaws, an area of worse-case scenarios with regard to the aforementioned flight operations was researched. The events selected to

The thesis is an investigation on current regulations of commercial aircraft landing and take-off procedures and an analysis of potential weaknesses within the regulatory system for commercial aerospace. To determine such flaws, an area of worse-case scenarios with regard to the aforementioned flight operations was researched. The events selected to best-depict these scenarios where incidents of aircraft overrunning the runway, referred to as runway excursions. A case-study conducted of 44 federal investigations of runway excursions produced data indicating four influential factors within these incidents: weather, pilot error, instrument malfunction, and runway condition. Upon examination, all but pilot error appeared to have federal enforcement to diminish the occurrence of future incidents. This is a direct result of the broad possibilities that make up this factor. The study then searched for a consistent fault within the incidents with the results indicating an indirect relationship of thrust reversers, a technique utilized by pilots to provide additional braking, to these excursions. In cases of thrust reverser failure, pilots' over-reliance on the system lead to time being lost from the confusion produced by the malfunction, ultimately resulting in several different runway excursions. The legal implication with the situation is that current regulations are ambiguous on the subject of thrust reversers and thus do not properly model the usage of the technique. Thus, to observe the scope of danger this ambiguity presents to the industry, the relationship of the technique to commercial aerospace needed to be determined. Interviews were set-up with former commercial pilots to gather data related to the flight crew perspective. This data indicated that thrust reversers were actively utilized by pilots within the industry for landing operations. The problem with the current regulations was revealed that the lack of details on thrust reverser reflected a failure of regulations to model current industry flight operations. To improve safety within the industry, new data related to thrust reverser deployment must be developed and enforced to determine appropriate windows to utilize the technique, thus decreasing time lost in confusion that results from thrust reversers malfunction. Future work would be based on producing simulations to determine said data as well as proposing the policy suggestions produced by this thesis.
ContributorsCreighton, Andrew John (Author) / Takahashi, Timothy (Thesis director) / Marchant, Gary (Committee member) / Kimberly, Jimmy (Committee member) / Barrett, The Honors College (Contributor) / Mechanical and Aerospace Engineering Program (Contributor) / School of Mathematical and Statistical Sciences (Contributor) / School of Politics and Global Studies (Contributor)
Created2014-05
134673-Thumbnail Image.png
Description
This paper describes an aircraft design optimization tool for wave drag reduction. The tool synthesizes an aircraft wing and fuselage geometry using the Rhinoceros CAD program. It then implements an algorithm to perform area-ruling on the fuselage. The algorithm adjusts the cross-sectional area along the length of the fuselage, with

This paper describes an aircraft design optimization tool for wave drag reduction. The tool synthesizes an aircraft wing and fuselage geometry using the Rhinoceros CAD program. It then implements an algorithm to perform area-ruling on the fuselage. The algorithm adjusts the cross-sectional area along the length of the fuselage, with the wing geometry fixed, to match a Sears-Haack distribution. Following the optimization of the area, the tool collects geometric data for analysis using legacy performance tools. This analysis revealed that performing the optimization yielded an average reduction in wave drag of 25% across a variety of Mach numbers on two different starting geometries. The goal of this project is to integrate this optimization tool into a larger trade study tool as it will allow for higher fidelity modeling as well as large improvements in transonic and supersonic drag performance.
ContributorsLeader, Robert William (Author) / Takahashi, Timothy (Thesis director) / Middleton, James (Committee member) / Mechanical and Aerospace Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2016-12
133327-Thumbnail Image.png
Description
This paper outlines the development of a script which utilizes a series of user-defined input parameters to construct base-level CAD models of aircraft landing gear. With an increased focus on computation development of aircraft models to allow for a rapidprototyping design process, this program seeks to allow designers to check

This paper outlines the development of a script which utilizes a series of user-defined input parameters to construct base-level CAD models of aircraft landing gear. With an increased focus on computation development of aircraft models to allow for a rapidprototyping design process, this program seeks to allow designers to check for the validity of design integration before moving forward on systems testing. With this script, users are able to visually analyze the landing gear configurations on an aircraft in both the gear up and gear down configuration. The primary purpose this serves is to determine the validity of the gear's potential to fit within the limited real estate on an aircraft body. This, theoretically, can save time by weeding out infeasible designs before moving forward with subsystem performance testing. The script, developed in Python, constructs CAD models of dual and dual-tandem main landing gear configurations in the CAD program Rhino5. With an included design template consisting of 33 parameters, the script allows for a reasonable trade off between conciseness and flexibility of design.
ContributorsPatrick, Noah Edward (Author) / Takahashi, Timothy (Thesis director) / Middleton, James (Committee member) / Mechanical and Aerospace Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
158753-Thumbnail Image.png
Description
The process of designing any real world blunt leading-edge wing is tedious andinvolves hundreds, if not thousands, of design iterations to narrow down a single design.
Add in the complexities of supersonic flow and the challenge increases exponentially.
One possible, and often common, pathway for this design is to jump straight into

The process of designing any real world blunt leading-edge wing is tedious andinvolves hundreds, if not thousands, of design iterations to narrow down a single design.
Add in the complexities of supersonic flow and the challenge increases exponentially.
One possible, and often common, pathway for this design is to jump straight into detailed
volume grid computational fluid dynamics (CFD), in which the physics of supersonic
flow are modeled directly but at a high computational cost and thus an incredibly long
design process. Classical aerodynamics experts have published work describing a process
which can be followed which might bypass the need for detailed CFD altogether.

This work outlines how successfully a simple vortex lattice panel method CFDcode can be used in the design process for a Mach 1.3 cruise speed airline wing concept.
Specifically, the success of the wing design is measured in its ability to operate subcritically (i.e. free of shock waves) even in a free stream flow which is faster than the
speed of sound. By using a modified version of Simple Sweep Theory, design goals are
described almost entirely based on defined critical pressure coefficients and critical Mach
numbers. The marks of a well-designed wing are discussed in depth and how these traits
will naturally lend themselves to a well-suited supersonic wing.

Unfortunately, inconsistencies with the published work are revealed by detailedCFD validation runs to be extensive and large in magnitude. These inconsistencies likely
have roots in several concepts related to supersonic compressible flow which are
explored in detail. The conclusion is made that the theory referenced in this work by the
classical aerodynamicists is incorrect and/or incomplete. The true explanation for the
perplexing shock wave phenomenon observed certainly lies in some convolution of the
factors discussed in this thesis. Much work can still be performed in the way of creating
an empirical model for shock wave formation across a highly swept wing with blunt
leading-edge airfoils.
ContributorsKurus, Noah John (Author) / Takahashi, Timothy (Thesis advisor) / Benson, David (Committee member) / Niemczyk, Mary (Committee member) / Arizona State University (Publisher)
Created2020