Matching Items (2)
Filtering by
- All Subjects: Combustion
- Creators: Milcarek, Ryan
Description
Micro/meso combustion has several advantages over regular combustion in terms of scale, efficiency, enhanced heat and mass transfer, quick startup and shutdown, fuel utilization and carbon footprint. This study aims to analyze the effect of temperature on critical sooting equivalence ratio and precursor formation in a micro-flow reactor. The effect of temperature on the critical sooting equivalence ratio of propane/air mixture at atmospheric pressure with temperatures ranging from 750-1250°C was investigated using a micro-flow reactor with a controlled temperature profile of diameter 2.3mm, equivalence ratios of 1-13 and inlet flow rates of 10 and 100sccm. The effect of inert gas dilution was studied by adding 90sccm of nitrogen to 10sccm of propane/air to make a total flow rate of 100sccm. The gas species were collected at the end of the reactor using a gas chromatograph for further analysis. Soot was indicated by visually examining the reactor before and after combustion for traces of soot particles on the inside of the reactor. At 1000-1250°C carbon deposition/soot formation was observed inside the reactor at critical sooting equivalence ratios. At 750-950°C, no soot formation was observed despite operating at much higher equivalence ratio, i.e., up to 100. Adding nitrogen resulted in an increase in the critical sooting equivalence ratio.
The wall temperature profiles were obtained with the help of a K-type thermocouple, to get an idea of the difference between the wall temperature provided with the resistive heater and the wall temperature with combustion inside the reactor. The temperature profiles were very similar in the case of 10sccm but markedly different in the other two cases for all the temperatures.
These results indicate a trend that is not well-known or understood for sooting flames, i.e., decreasing temperature decreases soot formation. The reactor capability to examine the effect of temperature on the critical sooting equivalence ratio at different flow rates was successfully demonstrated.
The wall temperature profiles were obtained with the help of a K-type thermocouple, to get an idea of the difference between the wall temperature provided with the resistive heater and the wall temperature with combustion inside the reactor. The temperature profiles were very similar in the case of 10sccm but markedly different in the other two cases for all the temperatures.
These results indicate a trend that is not well-known or understood for sooting flames, i.e., decreasing temperature decreases soot formation. The reactor capability to examine the effect of temperature on the critical sooting equivalence ratio at different flow rates was successfully demonstrated.
ContributorsKhalid, Abdul Hannan Hannan (Author) / Milcarek, Ryan (Thesis advisor) / Dahm, Werner (Committee member) / Kim, Jeonglae (Committee member) / Arizona State University (Publisher)
Created2019
Description
The paper analyzes the growing desire to use waste-to-energy strategies on municipal solid waste (MSW) to generate power. The two waste-to-energy technologies that will be explored are incineration and gasification. The background of these two technologies will be explained because incineration, which has been the pioneering technology for the past century, has come to be rivaled by gasification with its unique purification feature. Following this section, gasification and incineration power generation are studied to conclude which technology is sounder. This study will be conducted via an analysis to find the thermal and exergetic efficiencies and emissions of each. After analyzing the two technologies, both utilizing a vapor cogeneration power system, their efficiencies were found. For the gasification process, the thermal efficiency was 26% and the exergetic efficiency was 59%. The incineration process had a thermal efficiency of 25% and an exergetic efficiency of 55%. Lastly, the emission from the power generation of each method was explored to see which system had a greater impact on the environment. It was found that the primary emissions of these technologies were carbon dioxide and water.
ContributorsJackson, Cole Alan (Author) / Deng, Shuguang (Thesis director) / Milcarek, Ryan (Committee member) / Mechanical and Aerospace Engineering Program (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2020-05