Matching Items (686)
Filtering by
- All Subjects: Mechanical Engineering
Description
Recently, the use of zinc oxide (ZnO) nanowires as an interphase in composite materials has been demonstrated to increase the interfacial shear strength between carbon fiber and an epoxy matrix. In this research work, the strong adhesion between ZnO and carbon fiber is investigated to elucidate the interactions at the interface that result in high interfacial strength. First, molecular dynamics (MD) simulations are performed to calculate the adhesive energy between bare carbon and ZnO. Since the carbon fiber surface has oxygen functional groups, these were modeled and MD simulations showed the preference of ketones to strongly interact with ZnO, however, this was not observed in the case of hydroxyls and carboxylic acid. It was also found that the ketone molecules ability to change orientation facilitated the interactions with the ZnO surface. Experimentally, the atomic force microscope (AFM) was used to measure the adhesive energy between ZnO and carbon through a liftoff test by employing highly oriented pyrolytic graphite (HOPG) substrate and a ZnO covered AFM tip. Oxygen functionalization of the HOPG surface shows the increase of adhesive energy. Additionally, the surface of ZnO was modified to hold a negative charge, which demonstrated an increase in the adhesive energy. This increase in adhesion resulted from increased induction forces given the relatively high polarizability of HOPG and the preservation of the charge on ZnO surface. It was found that the additional negative charge can be preserved on the ZnO surface because there is an energy barrier since carbon and ZnO form a Schottky contact. Other materials with the same ionic properties of ZnO but with higher polarizability also demonstrated good adhesion to carbon. This result substantiates that their induced interaction can be facilitated not only by the polarizability of carbon but by any of the materials at the interface. The versatility to modify the magnitude of the induced interaction between carbon and an ionic material provides a new route to create interfaces with controlled interfacial strength.
ContributorsGalan Vera, Magdian Ulises (Author) / Sodano, Henry A (Thesis advisor) / Jiang, Hanqing (Committee member) / Solanki, Kiran (Committee member) / Oswald, Jay (Committee member) / Speyer, Gil (Committee member) / Arizona State University (Publisher)
Created2013
Description
Wind measurements are fundamental inputs for the evaluation of potential energy yield and performance of wind farms. Three-dimensional scanning coherent Doppler lidar (CDL) may provide a new basis for wind farm site selection, design, and control. In this research, CDL measurements obtained from multiple wind energy developments are analyzed and a novel wind farm control approach has been modeled. The possibility of using lidar measurements to more fully characterize the wind field is discussed, specifically, terrain effects, spatial variation of winds, power density, and the effect of shear at different layers within the rotor swept area. Various vector retrieval methods have been applied to the lidar data, and results are presented on an elevated terrain-following surface at hub height. The vector retrieval estimates are compared with tower measurements, after interpolation to the appropriate level. CDL data is used to estimate the spatial power density at hub height. Since CDL can measure winds at different vertical levels, an approach for estimating wind power density over the wind turbine rotor-swept area is explored. Sample optimized layouts of wind farm using lidar data and global optimization algorithms, accounting for wake interaction effects, have been explored. An approach to evaluate spatial wind speed and direction estimates from a standard nested Coupled Ocean and Atmosphere Mesoscale Prediction System (COAMPS) model and CDL is presented. The magnitude of spatial difference between observations and simulation for wind energy assessment is researched. Diurnal effects and ramp events as estimated by CDL and COAMPS were inter-compared. Novel wind farm control based on incoming winds and direction input from CDL's is developed. Both yaw and pitch control using scanning CDL for efficient wind farm control is analyzed. The wind farm control optimizes power production and reduces loads on wind turbines for various lidar wind speed and direction inputs, accounting for wind farm wake losses and wind speed evolution. Several wind farm control configurations were developed, for enhanced integrability into the electrical grid. Finally, the value proposition of CDL for a wind farm development, based on uncertainty reduction and return of investment is analyzed.
ContributorsKrishnamurthy, Raghavendra (Author) / Calhoun, Ronald J (Thesis advisor) / Chen, Kangping (Committee member) / Huang, Huei-Ping (Committee member) / Fraser, Matthew (Committee member) / Phelan, Patrick (Committee member) / Arizona State University (Publisher)
Created2013
Description
Communication skills within dating contexts are developed during the adolescent years, and are associated with a lifelong ability to have satisfying, enduring, and non-violent partnerships. As such, they are currently and increasingly implemented into both more general forms of healthy relationship education, as well as that targeting the prevention of teen dating violence specifically. Reaching Mexican American youth with culturally and developmentally appropriate relationship education, including communication skills, may be particularly important given their earlier transitions to marital and parenting relationships, acculturative stressors that present them with unique coupling challenges, and their higher rates of teen dating violence as compared to European American youth. We know very little about how Mexican American dating couples communicate about areas of conflict. This dissertation research utilizes Bell and Naugle's (2008) framework of interpersonal violence to explore how cultural and developmental considerations may be integrated in order to better understand how communication behaviors contribute to Mexican American middle adolescents' experiences with dating conflict. I use an observational study design in order to 1.) Qualitatively explore the communication strategies used by a sample of committed couples, including integration of culturally- and developmentally-relevant contexts, 2.) Quantitatively examine whether couple-level discrepancies in acculturation are associated with observed negativity, including whether this relationship may be mediated by dissimilar gender-related beliefs, and to 3.) Review empirical findings pertaining to the communication behaviors of Mexican American adolescents and to integrate ecodevelopmental theory in said framework as informed by Papers 1, 2, and literature specific to this topic area. The ultimate aim of this dissertation research is to generate findings that may improve the dating health of Mexican American adolescents living in the United States.
ContributorsAdams, Heidi (Author) / Rankin Williams, Lela (Thesis advisor) / Marsiglia, Flavio (Committee member) / Anthony, Elizabeth (Committee member) / Arizona State University (Publisher)
Created2013
Description
Production from a high pressure gas well at a high production-rate encounters the risk of operating near the choking condition for a compressible flow in porous media. The unbounded gas pressure gradient near the point of choking, which is located near the wellbore, generates an effective tensile stress on the porous rock frame. This tensile stress almost always exceeds the tensile strength of the rock and it causes a tensile failure of the rock, leading to wellbore instability. In a porous rock, not all pores are choked at the same flow rate, and when just one pore is choked, the flow through the entire porous medium should be considered choked as the gas pressure gradient at the point of choking becomes singular. This thesis investigates the choking condition for compressible gas flow in a single microscopic pore. Quasi-one-dimensional analysis and axisymmetric numerical simulations of compressible gas flow in a pore scale varicose tube with a number of bumps are carried out, and the local Mach number and pressure along the tube are computed for the flow near choking condition. The effects of tube length, inlet-to-outlet pressure ratio, the number of bumps and the amplitude of the bumps on the choking condition are obtained. These critical values provide guidance for avoiding the choking condition in practice.
ContributorsYuan, Jing (Author) / Chen, Kangping (Thesis advisor) / Wang, Liping (Committee member) / Huang, Huei-Ping (Committee member) / Arizona State University (Publisher)
Created2013
Description
The objective of this thesis was to compare various approaches for classification of the `good' and `bad' parts via non-destructive resonance testing methods by collecting and analyzing experimental data in the frequency and time domains. A Laser Scanning Vibrometer was employed to measure vibrations samples in order to determine the spectral characteristics such as natural frequencies and amplitudes. Statistical pattern recognition tools such as Hilbert Huang, Fisher's Discriminant, and Neural Network were used to identify and classify the unknown samples whether they are defective or not. In this work, a Finite Element Analysis software packages (ANSYS 13.0 and NASTRAN NX8.0) was used to obtain estimates of resonance frequencies in `good' and `bad' samples. Furthermore, a system identification approach was used to generate Auto-Regressive-Moving Average with exogenous component, Box-Jenkins, and Output Error models from experimental data that can be used for classification
ContributorsJameel, Osama (Author) / Redkar, Sangram (Thesis advisor) / Arizona State University (Publisher)
Created2013
Description
This dissertation explores vulnerability to extreme heat hazards in the Maricopa County, Arizona metropolitan region. By engaging an interdisciplinary approach, I uncover the epidemiological, historical-geographical, and mitigation dimensions of human vulnerability to extreme heat in a rapidly urbanizing region characterized by an intense urban heat island and summertime heat waves. I first frame the overall research within global climate change and hazards vulnerability research literature, and then present three case studies. I conclude with a synthesis of the findings and lessons learned from my interdisciplinary approach using an urban political ecology framework. In the first case study I construct and map a predictive index of sensitivity to heat health risks for neighborhoods, compare predicted neighborhood sensitivity to heat-related hospitalization rates, and estimate relative risk of hospitalizations for neighborhoods. In the second case study, I unpack the history and geography of land use/land cover change, urban development and marginalization of minorities that created the metropolitan region's urban heat island and consequently, the present conditions of extreme heat exposure and vulnerability in the urban core. The third study uses computational microclimate modeling to evaluate the potential of a vegetation-based intervention for mitigating extreme heat in an urban core neighborhood. Several findings relevant to extreme heat vulnerability emerge from the case studies. First, two main socio-demographic groups are found to be at higher risk for heat illness: low-income minorities in sparsely-vegetated neighborhoods in the urban core, and the elderly and socially-isolated in the expansive suburban fringe of Maricopa County. The second case study reveals that current conditions of heat exposure in the region's urban heat island are the legacy of historical marginalization of minorities and large-scale land-use/land cover transformations of natural desert land covers into heat-retaining urban surfaces of the built environment. Third, summertime air temperature reductions in the range 0.9-1.9 °C and of up to 8.4 °C in surface temperatures in the urban core can be achieved through desert-adapted canopied vegetation, suggesting that, at the microscale, the urban heat island can be mitigated by creating vegetated park cool islands. A synthesis of the three case studies using the urban political ecology framework argues that climate changed-induced heat hazards in cities must be problematized within the socio-ecological transformations that produce and reproduce urban landscapes of risk. The interdisciplinary approach to heat hazards in this dissertation advances understanding of the social and ecological drivers of extreme heat by drawing on multiple theories and methods from sociology, urban and Marxist geography, microclimatology, spatial epidemiology, environmental history, political economy and urban political ecology.
ContributorsDeclet-Barreto, Juan (Author) / Harlan, Sharon L (Thesis advisor) / Bolin, Bob (Thesis advisor) / Hirt, Paul (Committee member) / Boone, Christopher (Committee member) / Arizona State University (Publisher)
Created2013
Community-based development: scaling up the correct use of misoprostol at home births in Afghanistan
Description
Globally, more than 350 000 women die annually from complications during pregnancy and childbirth (UNFPA, 2011). Nearly 99% of these, according to World Health Organization (WHO) trends (2010) occur in the developing world outside of a hospital setting with limited resources including emergency care (WHO, 2012; UNFPA, 2011). The most prevalent cause of death is postpartum hemorrhage (PPH), accounting for 25% of deaths according to WHO statistics (2012). Conditions in Afghanistan are reflective of the scope and magnitude of the problem. In Afghanistan, maternal mortality is thought to be among the highest in the world. The Afghan Mortality Survey (AMS) data implies that one Afghan woman dies about every 2 hours from pregnancy-related causes (AMS, 2010). Lack of empowerment, education and access to health care resources increase a woman's risk of dying during pregnancy (AMS, 2010). This project aims to investigate the prospects of scaling-up the correct use of misoprostol, a prostaglandin E1 analogue, to treat PPH in developing countries where skilled assistance and resources are scant. As there has been little published on the lessons learned from programs already in place, this study is experience-driven, based on the knowledge of industry experts. This study employs a concurrent triangulation approach to synthesize quantitative data obtained from previous studies with qualitative information gathered through the testimonies of key personnel who participated in pilot programs involving misoprostol. There are many obstacles to scaling-up training initiatives in Afghanistan and other low-resource areas. The analysis concludes that the most crucial factors for scaling-up community-based programs include: more studies analyzing lessons learns from community driven approaches; stronger partnerships with community health care workers; overcoming barriers like association with abortion, misuse and product issues; and a heightened global and community awareness of the severity of PPH without treatment. These results have implications for those who actively work in Afghanistan to promote maternal health and other countries that may use Afghanistan's work as a blueprint for reducing maternal mortality through community-based approaches. Keywords: Afghanistan, community-based interventions, community-driven, maternal mortality, MDG5, misoprostol, postpartum hemorrhage, reproduction, scale-up
ContributorsCristy, Candice (Author) / Grossman, Gary (Thesis advisor) / Parmentier, Mary-Jane (Committee member) / Byrd, Denise (Committee member) / Arizona State University (Publisher)
Created2013
Description
This phenomenological qualitative study examines the experiences of volunteer tourism on host communities using social representations theory. The experiences of three stakeholder-groups (community residents, volunteers, and nongovernmental organizations) are considered. Overall objectives of this project are to investigate the following questions: a) what are the effects of volunteer tourism on a community as perceived by different stakeholders; b) what effects do volunteer tourists have on the community compared to other forms of tourism as perceived by different stakeholders; c) how do the various stakeholders perceive the different forms of tourism in communities in which they live or work; and d) why and how do nongovernmental organizations (NGOs) use volunteer tourism as a strategy for their projects. This study attempts to describe and interpret these meanings with a high degree of depth and richness using interviews, observation, and document analysis. Each chapter is written as a stand-alone paper to be published in a journal and describes the perspectives of the three groups interviewed with the final chapter a summary and comparison from all three groups. Findings show that there are both positive and negative impacts of volunteer tourism in favela communities, with the majority of the three groups expressing its positives and its importance to the community. All groups mentioned similar positive and negative elements of volunteer tourism with some elements that were unique to each group. This study also attempted to compare and contrast the differences between volunteer tourism and favela tours. The findings show that volunteer tourism helps recreate the social representations of the favela thereby improving self-esteem in the community, helps breakdown preconceptions, and helps create community pride. The community feels as equals with the volunteers and describes the interactions as friendships, sharing cultural experiences, and exchanging of knowledge. Conversely, all three groups described favela tours as dehumanizing using words like `safari tour' or `zoo tour' and felt that their community was being sold as a commodity. However, the interviews showed that all three groups, although had strong opinions about the ethical implications of favela tours, still felt conflicted when comparing it with some of the potential social and economic benefits that it may bring.
ContributorsAquino, Jessica Faustini (Author) / Andereck, Kathleen (Thesis advisor) / Mcgehee, Nancy (Committee member) / Phillips, Rhonda (Committee member) / Wang, Lili (Committee member) / Arizona State University (Publisher)
Created2013
Description
There is a popular notion that creativity is highly valued in our culture. However, those "in the trenches," people in creative endeavors that actually produce the acts of creativity, say this is not so. There is a negative correlation between the value stated and the true value placed on creativity by our contemporary culture. The primary purpose of this study was to investigate that correlation as well as a possible contributing factor to this negative correlation--the fear of risk involved in enacting and accepting creativity. The methods used in this study were literature review and interview. An extensive literature review was done, as much has been written on creativity. The review was done in four parts: 1) the difficulty in defining creativity; 2) fear and the fear of creativity; 3) solutions - ways to be, express, and accept creativity; and 4) the plethora of articles written about creativity. Six one-on-one interviews were conducted with creative individuals from a variety of commercial creative endeavors. Creatives in commercial fields were chosen specifically because of their ability to influence the culture. The results of this study showed that the hypothesis, that there is a negative correlation between the value stated and the true value placed on creativity, is true. The fear of risk involved in enacting and accepting creativity as a factor in this dichotomy was also shown to be true.
ContributorsGelman, Howard P (Author) / Heywood, Wil (Thesis advisor) / Patel, Mookesh (Committee member) / Knox, Gordon (Committee member) / Arizona State University (Publisher)
Created2013
Description
Smoke entering a flight deck cabin has been an issue for commercial aircraft for many years. The issue for a flight crew is how to mitigate the smoke so that they can safely fly the aircraft. For this thesis, the feasibility of having a Negative Pressure System that utilizes the cabin altitude pressure and outside altitude pressure to remove smoke from a flight deck was studied. Existing procedures for flight crews call for a descent down to a safe level for depressurizing the aircraft before taking further action. This process takes crucial time that is critical to the flight crew's ability to keep aware of the situation. This process involves a flight crews coordination and fast thinking to manually take control of the aircraft; which has become increasing more difficult due to the advancements in aircraft automation. Unfortunately this is the only accepted procedure that is used by a flight crew. Other products merely displace the smoke. This displacement is after the time it takes for the flight crew to set up the smoke displacement unit with no guarantee that a flight crew will be able to see or use all of the aircraft's controls. The Negative Pressure System will work automatically and not only use similar components already found on the aircraft, but work in conjunction with the smoke detection system and pressurization system so smoke removal can begin without having to descend down to a lower altitude. In order for this system to work correctly many factors must be taken into consideration. The size of a flight deck varies from aircraft to aircraft, therefore the ability for the system to efficiently remove smoke from an aircraft is taken into consideration. For the system to be feasible on an aircraft the cost and weight must be taken into consideration as the added fuel consumption due to weight of the system may be the limiting factor for installing such a system on commercial aircraft.
ContributorsDavies, Russell (Author) / Rogers, Bradley (Thesis advisor) / Palmgren, Dale (Committee member) / Rajadas, John (Committee member) / Arizona State University (Publisher)
Created2013