Matching Items (215)
Filtering by
- All Subjects: Social Media
- Creators: Barrett, The Honors College
Description
Modern day gas turbine designers face the problem of hot mainstream gas ingestion into rotor-stator disk cavities. To counter this ingestion, seals are installed on the rotor and stator disk rims and purge air, bled off from the compressor, is injected into the cavities. It is desirable to reduce the supply of purge air as this decreases the net power output as well as efficiency of the gas turbine. Since the purge air influences the disk cavity flow field and effectively the amount of ingestion, the aim of this work was to study the cavity velocity field experimentally using Particle Image Velocimetry (PIV). Experiments were carried out in a model single-stage axial flow turbine set-up that featured blades as well as vanes, with purge air supplied at the hub of the rotor-stator disk cavity. Along with the rotor and stator rim seals, an inner labyrinth seal was provided which split the disk cavity into a rim cavity and an inner cavity. First, static gage pressure distribution was measured to ensure that nominally steady flow conditions had been achieved. The PIV experiments were then performed to map the velocity field on the radial-tangential plane within the rim cavity at four axial locations. Instantaneous velocity maps obtained by PIV were analyzed sector-by-sector to understand the rim cavity flow field. It was observed that the tangential velocity dominated the cavity flow at low purge air flow rate, its dominance decreasing with increase in the purge air flow rate. Radially inboard of the rim cavity, negative radial velocity near the stator surface and positive radial velocity near the rotor surface indicated the presence of a recirculation region in the cavity whose radial extent increased with increase in the purge air flow rate. Qualitative flow streamline patterns are plotted within the rim cavity for different experimental conditions by combining the PIV map information with ingestion measurements within the cavity as reported in Thiagarajan (2013).
ContributorsPathak, Parag (Author) / Roy, Ramendra P (Thesis advisor) / Calhoun, Ronald (Committee member) / Lee, Taewoo (Committee member) / Arizona State University (Publisher)
Created2013
Description
Over the past three decades, particle image velocimetry (PIV) has been continuously growing to become an informative and robust experimental tool for fluid mechanics research. Compared to the early stage of PIV development, the dynamic range of PIV has been improved by about an order of magnitude (Adrian, 2005; Westerweel et al., 2013). Further improvement requires a breakthrough innovation, which constitutes the main motivation of this dissertation. N-pulse particle image velocimetry-accelerometry (N-pulse PIVA, where N>=3) is a promising technique to this regard. It employs bursts of N pulses to gain advantages in both spatial and temporal resolution. The performance improvement by N-pulse PIVA is studied using particle tracking (i.e. N-pulse PTVA), and it is shown that an enhancement of at least another order of magnitude is achievable. Furthermore, the capability of N-pulse PIVA to measure unsteady acceleration and force is demonstrated in the context of an oscillating cylinder interacting with surrounding fluid. The cylinder motion, the fluid velocity and acceleration, and the fluid force exerted on the cylinder are successfully measured. On the other hand, a key issue of multi-camera registration for the implementation of N-pulse PIVA is addressed with an accuracy of 0.001 pixel. Subsequently, two applications of N-pulse PTVA to complex flows and turbulence are presented. A novel 8-pulse PTVA analysis was developed and validated to accurately resolve particle unsteady drag in post-shock flows. It is found that the particle drag is substantially elevated from the standard drag due to flow unsteadiness, and a new drag correlation incorporating particle Reynolds number and unsteadiness is desired upon removal of the uncertainty arising from non-uniform particle size. Next, the estimation of turbulence statistics utilizes the ensemble average of 4-pulse PTV data within a small domain of an optimally determined size. The estimation of mean velocity, mean velocity gradient and isotropic dissipation rate are presented and discussed by means of synthetic turbulence, as well as a tomographic measurement of turbulent boundary layer. The results indicate the superior capability of the N-pulse PTV based method to extract high-spatial-resolution high-accuracy turbulence statistics.
ContributorsDing, Liuyang (Author) / Adrian, Ronald J (Thesis advisor) / Frakes, David (Committee member) / Herrmann, Marcus (Committee member) / Huang, Huei-Ping (Committee member) / Peet, Yulia (Committee member) / Arizona State University (Publisher)
Created2018
Description
Rapid expansion of dense beds of fine, spherical particles subjected to rapid depressurization is studied in a vertical shock tube. As the particle bed is unloaded, a high-speed video camera captures the dramatic evolution of the particle bed structure. Pressure transducers are used to measure the dynamic pressure changes during the particle bed expansion process. Image processing, signal processing, and Particle Image Velocimetry techniques, are used to examine the relationships between particle size, initial bed height, bed expansion rate, and gas velocities.
The gas-particle interface and the particle bed as a whole expand and evolve in stages. First, the bed swells nearly homogeneously for a very brief period of time (< 2ms). Shortly afterward, the interface begins to develop instabilities as it continues to rise, with particles nearest the wall rising more quickly. Meanwhile, the bed fractures into layers and then breaks down further into cellular-like structures. The rate at which the structural evolution occurs is shown to be dependent on particle size. Additionally, the rate of the overall bed expansion is shown to be dependent on particle size and initial bed height.
Taller particle beds and beds composed of smaller-diameter particles are found to be associated with faster bed-expansion rates, as measured by the velocity of the gas-particle interface. However, the expansion wave travels more slowly through these same beds. It was also found that higher gas velocities above the the gas-particle interface measured \textit{via} Particle Image Velocimetry or PIV, were associated with particle beds composed of larger-diameter particles. The gas dilation between the shocktube diaphragm and the particle bed interface is more dramatic when the distance between the gas-particle interface and the diaphragm is decreased-as is the case for taller beds.
To further elucidate the complexities of this multiphase compressible flow, simple OpenFOAM (Weller, 1998) simulations of the shocktube experiment were performed and compared to bed expansion rates, pressure fluctuations, and gas velocities. In all cases, the trends and relationships between bed height, particle diameter, with expansion rates, pressure fluctuations and gas velocities matched well between experiments and simulations. In most cases, the experimentally-measured bed rise rates and the simulated bed rise rates matched reasonably well in early times. The trends and overall values of the pressure fluctuations and gas velocities matched well between the experiments and simulations; shedding light on the effects each parameter has on the overall flow.
The gas-particle interface and the particle bed as a whole expand and evolve in stages. First, the bed swells nearly homogeneously for a very brief period of time (< 2ms). Shortly afterward, the interface begins to develop instabilities as it continues to rise, with particles nearest the wall rising more quickly. Meanwhile, the bed fractures into layers and then breaks down further into cellular-like structures. The rate at which the structural evolution occurs is shown to be dependent on particle size. Additionally, the rate of the overall bed expansion is shown to be dependent on particle size and initial bed height.
Taller particle beds and beds composed of smaller-diameter particles are found to be associated with faster bed-expansion rates, as measured by the velocity of the gas-particle interface. However, the expansion wave travels more slowly through these same beds. It was also found that higher gas velocities above the the gas-particle interface measured \textit{via} Particle Image Velocimetry or PIV, were associated with particle beds composed of larger-diameter particles. The gas dilation between the shocktube diaphragm and the particle bed interface is more dramatic when the distance between the gas-particle interface and the diaphragm is decreased-as is the case for taller beds.
To further elucidate the complexities of this multiphase compressible flow, simple OpenFOAM (Weller, 1998) simulations of the shocktube experiment were performed and compared to bed expansion rates, pressure fluctuations, and gas velocities. In all cases, the trends and relationships between bed height, particle diameter, with expansion rates, pressure fluctuations and gas velocities matched well between experiments and simulations. In most cases, the experimentally-measured bed rise rates and the simulated bed rise rates matched reasonably well in early times. The trends and overall values of the pressure fluctuations and gas velocities matched well between the experiments and simulations; shedding light on the effects each parameter has on the overall flow.
ContributorsZunino, Heather (Author) / Adrian, Ronald J (Thesis advisor) / Clarke, Amanda (Committee member) / Chen, Kangping (Committee member) / Herrmann, Marcus (Committee member) / Huang, Huei-Ping (Committee member) / Arizona State University (Publisher)
Created2019
Description
Few studies have examined the correlations between individual characteristics and other popular forms of social media other than Facebook. This study explored the ways emerging adults use Instagram and Snapchat and examined the relationships between social media and individual characteristics. A sample of 393 participants were recruited from a large university in the Southwestern United States. The participants completed an online questionnaire that included a newly developed social media measure along with established measures that examined the individual characteristics of social comparison orientation, self-esteem, loneliness, contingent self-worth, narcissism, and life satisfaction. In the present study, more participants reported having an active Instagram account than an active Facebook or Snapchat account. Additionally, a higher number of participants also reported preferring Instagram and Snapchat compared to Facebook. Significant correlations were found between various individual characteristics and three aspects of social media use: overall time spent on social media, whether the individual felt that their time spent on social media was meaningful, and how the individual felt emotionally after comparing themselves to others' photos and posts. Potential explanations and implications of the results are discussed.
ContributorsArndorfer, Sydney (Author) / Field, Ryan (Thesis director) / Sechler, Casey (Committee member) / School of Community Resources and Development (Contributor) / Sanford School of Social and Family Dynamics (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
Description
This paper looks at the growth of influencer marketing in application and how it has shifted the relationship between brands and consumers. Barriers to enter the space and methods of practice are discussed and analyzed to project the accessibility of obtaining influencer status. Best practices for brands and influencers are outlined based on research, and key findings are analyzed from interviewed participants that play an active role in the field. Another component of the paper includes the discussion of the significance of platform dependence regarding influencers and brands using social media channels to reach consumers. The dynamic of the relationship that exists between consumers, brands and platforms is demonstrated through a model to demonstrate the interdependence of the relationship. The final component of the paper involves the exploration of the field as an active participant through an experiment that was conducted by the researcher on behalf of the question: can anyone be an influencer? The answer to this question is explored through personal accounts on the journey during an eight month process of testing content creation and promotion to build awareness and increase engagement. The barriers to enter the space as an influencer and to collaborate with brands is addressed through the process of testing tactics and strategies on social channels, along with travel expeditions across Arizona to contribute to content creation purposed into blog articles. The findings throughout the paper are conclusive that the value of influencer marketing is increasing as more brands validate and utilize this method in their marketing efforts.
ContributorsDavis, Natalie Marie (Author) / Giles, Bret (Thesis director) / Schlacter, John (Committee member) / Department of Information Systems (Contributor) / Department of Marketing (Contributor) / Walter Cronkite School of Journalism and Mass Communication (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
Description
The purpose of this essay is to explain how celebrities manage their brand, as an image and commodity, using social media. Merriam-Webster defines "celebrity" as the "state of being celebrated." This essay will continue to explain how this state of celebration is a manufactured idea by the individual and the media's portrayal. Celebrities are "well-known for their well-knowness" (Boorstin, 1961, p. 58). Boorstin (1961) explains celebrities achieve fame not for their achievements, but by creating a unique personality (as cited in Turner, 2004). Crowd culture, networks, and audience knowledge are tools celebrities must use to navigate digital nuances. They must manage performance of self, adhere to internet social norms, and the obsessive fame culture. Celebrities are often referred to have "star power" and have a certain "charisma." This cultural identity is "negotiated and formed" contrived by a team through promotion, publicity, and advertising (Turner, 2004). Celebrities market themselves through branded content, media used to promote a product, on their social media pages while targeting crowd cultures. Networks truly define how celebrities must brand themselves on social media. This person-to-person contact establishes fan and consumer connections that build the celebrity's base and following. Despite campaigning in a digital world, it goes back to people connecting with people, not accounts linking to accounts. Celebrities manufacture all of these strategies and tactics as they market themselves as a commodity to target crowd culture audiences. This is why targeting crowd cultures is vitally important for celebrities. This essay explores the techniques of select celebrities as they succeed and fail navigating digital nuances.
ContributorsPierce, Ellen (Author) / Jacoby, Jim (Thesis director) / Himberg, Julia (Committee member) / Department of English (Contributor) / Walter Cronkite School of Journalism and Mass Communication (Contributor) / Barrett, The Honors College (Contributor)
Created2017-12
Description
This thesis will examine the recruitment process of educated millennials coming from four-year institutions to their first job out of college. When referring to millennials throughout my research, I am specifically focusing on current college graduates in order to better relate to my own experiences as a soon-to-be-graduate seeking a job. I will examine the various recruiting techniques, i.e. channels to connect with graduates, and the hiring and interview process as a whole. This thesis will also discuss the challenges and differences of recruiting millennials versus other generations. It will also discuss the latest trends in college and early talent recruiting. In order to do this, I conducted a number of in-depth interviews with recruiters and hiring managers from various companies that recruit heavily from Arizona State University (ASU), in order to determine what these companies have done to be successful among young college graduates. I aimed to identify the specific techniques that these companies use to connect with recent college graduates, what skills these firms are looking for, and what the hiring process looks like for new millennial employees. I also conducted an extensive online literature search about recruiting educated millennials in the workforce, and I used that information as a basis to form my interview questions. The interviews were meant to confirm or deny that research, but the interviewees also revealed many new trends and insights. I hope that this information will be beneficial not only to college seniors seeking first-time employment, but also to other companies who feel that they are struggling to capture young talent.
ContributorsCapra, Alexandria Luccia (Author) / Kalika, Dale (Thesis director) / Eaton, Kathryn (Committee member) / W. P. Carey School of Business (Contributor) / Department of Marketing (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
Nonprofits often struggle in fully implementing a successful social media strategy. These organizations neglect to create and maintain relationships with stakeholders, engage their audience, and build brand awareness in an online setting. As social media has essentially become one of the largest sources of information dissemination and one of the most populated platforms in the online world, a nonprofit's online presence has become increasingly important. Through a 22-day content analysis and 43-question survey that was distributed to the general public on Twitter and Facebook, this paper looks comprehensively into the elements and tactics used by Make-A-Wish, Halo and ALS Association. Based off of the research findings from this study, important aspects of these nonprofits' online strategy will be identified and analyzed.
ContributorsJoseph, Teresa Marie (Author) / Wu, Xu (Thesis director) / Thornton, Leslie (Committee member) / Department of Marketing (Contributor) / Walter Cronkite School of Journalism and Mass Communication (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
In a world where tweets, texts, posts, likes and favorites are a part of our daily lives, it's hard not to believe everything we see. Every little detail of one's personal life is easily shared with the world with the click of a button. And because of this, the beauty standards that society has created is jumping from the pages of magazines and TV shows to apps such as Instagram and Facebook. The majority of social media users are young teens and adults, but the popularity of these apps is rising among kids as young as five years old as well. These are some of the most impressionable years of one's life. So, by seeing these standards that qualify someone as "beautiful," individuals are likely to strive toward these standards. And while some may seem impossible to attain, individuals are willing to go to extreme lengths to get there. Qualities like the "thigh gap" are slowly becoming more popular, and are putting individuals at risk. In a country where the ideal woman is skinny, and most of the celebrities and models showcase these nearly impossible standards, it's hard not to fall into the trap. With the addition of editing software and filters to already existing social media applications, the ability to edit and enhance photos is in the hands of the user. Photos can be edited so dramatically different from the original that what we're seeing doesn't even exist. This project explores the false reality that social media is creating and the negative effects it has on young girls and women. It also offers a solution to the problem.
ContributorsHenry, Lauren Nicole (Author) / Sanft, Alfred (Thesis director) / Heywood, William (Committee member) / School of International Letters and Cultures (Contributor) / The Design School (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
Social media is used by people every day to discuss the nuances of their lives. Major League Baseball (MLB) is a popular sport in the United States, and as such has generated a great deal of activity on Twitter. As fantasy baseball continues to grow in popularity, so does the research into better algorithms for picking players. Most of the research done in this area focuses on improving the prediction of a player's individual performance. However, the crowd-sourcing power afforded by social media may enable more informed predictions about players' performances. Players are chosen by popularity and personal preferences by most amateur gamblers. While some of these trends (particularly the long-term ones) are captured by ranking systems, this research was focused on predicting the daily spikes in popularity (and therefore price or draft order) by comparing the number of mentions that the player received on Twitter compared to their previous mentions. In doing so, it was demonstrated that improved fantasy baseball predictions can be made through leveraging social media data.
ContributorsRuskin, Lewis John (Author) / Liu, Huan (Thesis director) / Montgomery, Douglas (Committee member) / Morstatter, Fred (Committee member) / Industrial, Systems (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2017-05