Matching Items (11)
Filtering by
- All Subjects: robotics
- Genre: Masters Thesis
- Creators: Marvi, Hamid
- Status: Published
Description
The Basilisk lizard is known for its agile locomotion capabilities on granular and aquatic media making it an impressive model organism for studying multi-terrain locomotion mechanics. The work presented here is aimed at understanding locomotion characteristics of Basilisk lizards through a systematic series of robotic and animal experiments. In this work, a Basilisk lizard inspired legged robot with bipedal and quadrupedal locomotion capabilities is presented. A series of robot experiments are conducted on dry and wet (saturated) granular media to determine the effects of gait parameters and substrate saturation, on robot velocity and energetics. Gait parameters studied here are stride frequency and stride length. Results of robot experiments are compared with previously obtained animal data. It is observed that for a fixed robot stride frequency, velocity and stride length increase with increasing saturation, confirming the locomotion characteristics of the Basilisk lizard. It is further observed that with increasing saturation level, robot cost of transport decreases. An identical series of robot experiments are performed with quadrupedal gait to determine effects of gait parameters on robot performance. Generally, energetics of bipedal running is observed to be higher than quadrupedal operation. Experimental results also reveal how gait parameters can be varied to achieve different desired velocities depending on the substrate saturation level. In addition to robot experiments on granular media, a series of animal experiments are conducted to determine and characterize strategies
exhibited by Basilisk lizards when transitioning from granular to aquatic media.
exhibited by Basilisk lizards when transitioning from granular to aquatic media.
ContributorsJayanetti, Vidu (Author) / Marvi, Hamid (Thesis advisor) / Emady, Heather (Committee member) / Lee, Hyunglae (Committee member) / Arizona State University (Publisher)
Created2018
Description
Autonomous Robots have a tremendous potential to assist humans in environmental monitoring tasks. In order to generate meaningful data for humans to analyze, the robots need to collect accurate data and develop reliable representation of the environment. This is achieved by employing scalable and robust navigation and mapping algorithms that facilitate acquiring and understanding data collected from the array of on-board sensors. To this end, this thesis presents navigation and mapping algorithms for autonomous robots that can enable robot navigation in complexenvironments and develop real time semantic map of the environment respectively. The first part of the thesis presents a novel navigation algorithm for an autonomous underwater vehicle that can maintain a fixed distance from the coral terrain while following a human diver. Following a human diver ensures that the robot would visit all important sites in the coral reef while maintaining a constant distance from the terrain reduces heterscedasticity in the measurements. This algorithm was tested on three different synthetic terrains including a real model of a coral reef in Hawaii. The second part of the thesis presents a dense semantic surfel mapping technique based on top of a popular surfel mapping algorithm that can generate meaningful maps in real time. A semantic mask from a depth aligned RGB-D camera was used to assign labels
to the surfels which were then probabilistically updated with multiple measurements. The mapping algorithm was tested with simulated data from an RGB-D camera and the results were analyzed.
ContributorsAntervedi, Lakshmi Gana Prasad (Author) / Das, Jnaneshwar (Thesis advisor) / Martin, Roberta E (Committee member) / Marvi, Hamid (Committee member) / Arizona State University (Publisher)
Created2021
Description
The unparalleled motion and manipulation abilities of an octopus have intrigued engineers and biologists for many years. How can an octopus having no bones transform its arms from a soft state to a one stiff enough to catch and even kill prey? The octopus arm is a muscular hydrostat that enables these manipulations in and through its arm. The arm is a tightly packed array of muscle groups namely longitudinal, transverse and oblique. The orientation of these muscle fibers aids the octopus in achieving core movements like shortening, bending, twisting and elongation as hypothesized previously. Through localized electromyography (EMG) recordings of the longitudinal and transverse muscles of Octopus bimaculoides quantitatively the roles of these muscle layers will be confirmed. Five EMG electrode probes were inserted into the longitudinal and transverse muscle layers of an amputated octopus arm. One into the axial nerve cord to electrically stimulate the arm for movements. The experiments were conducted with the amputated arm submerged in sea water with surrounded cameras to record the movement, all housed in a Faraday cage. The findings of this research could possibly lead to the development of soft actuators built out of soft materials for applications in minimally invasive surgery, search-and-rescue operations, and wearable prosthetics.
ContributorsMathews, Robin Koshy (Author) / Marvi, Hamid (Thesis advisor) / Fisher, Rebecca (Committee member) / Xu, Zhe (Committee member) / Arizona State University (Publisher)
Created2022
Description
Acrobatic maneuvers of quadrotors present unique challenges concerning trajectorygeneration, control, and execution. Specifically, the flip maneuver requires dynamically
feasible trajectories and precise control. Various factors, including rotor dynamics,
thrust allocation, and control strategies, influence the successful execution of flips.
This research introduces an approach for tracking optimal trajectories to execute flip
maneuvers while ensuring system stability autonomously. Model Predictive Control
(MPC) designs the controller, enabling the quadrotor to plan and execute optimal
trajectories in real-time, accounting for dynamic constraints and environmental factors.
The utilization of predictive models enables the quadrotor to anticipate and adapt to
changes during aggressive maneuvers.
Simulation-based evaluations were conducted in the ROS and Gazebo environments.
These evaluations provide valuable insights into the quadrotor’s behavior, response
time, and tracking accuracy. Additionally, real-time flight experiments utilizing state-
of-the-art flight controllers, such as the PixHawk 4, and companion computers, like
the Hardkernel Odroid, validate the effectiveness of the proposed control algorithms
in practical scenarios. The conducted experiments also demonstrate the successful
execution of the proposed approach.
This research’s outcomes contribute to quadrotor technology’s advancement, particularly in acrobatic maneuverability. This opens up possibilities for executing
maneuvers with precise timing, such as slingshot probe releases during flips. Moreover,
this research demonstrates the efficacy of MPC controllers in achieving autonomous
probe throws within no-fly zone environments while maintaining an accurate desired
range. Field application of this research includes probe deployment into volcanic
plumes or challenging-to-access rocky fault scarps, and imaging of sites of interest. along flight paths through rolling or pitching maneuvers of the quadrotor, to use sensorsuch as cameras or spectrometers on the quadrotor belly.
Contributorsjain, saransh (Author) / Das, Jnaneshwar (Thesis advisor) / Zhang, Wenlong (Committee member) / Marvi, Hamid (Committee member) / Arizona State University (Publisher)
Created2023
Description
Existing robotic excavation research has been primarily focused on lunar mining missions or simple traffic control in confined tunnels, however little work attempts to bring collective excavation into the realm of human infrastructure. This thesis explores a decentralized approach to excavation processes, where traffic laws are borrowed from swarms of fire ants (Solenopsis invicta) or termites (Coptotermes formosanus) to create decision rules for a swarm of robots working together and organizing effectively to create a desired final excavated pattern.
First, a literature review of the behavioral rules of different types of insect colonies and the resulting structural patterns over the course of excavation was conducted. After identifying pertinent excavation laws, three different finite state machines were generated that relate to construction, search and rescue operations, and extraterrestrial exploration. After analyzing these finite state machines, it became apparent that they all shared a common controller. Then, agent-based NetLogo software was used to simulate a swarm of agents that run this controller, and a model for excavating behaviors and patterns was fit to the simulation data. This model predicts the tunnel shapes formed in the simulation as a function of the swarm size and a time delay, called the critical waiting period, in one of the state transitions. Thus, by controlling the individual agents' behavior, it was possible to control the structural outcomes of collective excavation in simulation.
To create an experimental testbed that could be used to physically implement the controller, a small foldable robotic platform was developed, and it's capabilities were tested in granular media. In order to characterize the granular media, force experiments were conducted and parameters were measured for resistive forces during an excavation cycle. The final experiment verified the robot's ability to engage in excavation and deposition, and to determine whether or not to begin the critical waiting period. This testbed can be expanded with multiple robots to conduct small-scale experiments on collective excavation, such as further exploring the effects of the critical waiting period on the resulting excavation pattern. In addition, investigating other factors like tuning digging efficiency or deposition proximity could help to transition the proposed bio-inspired swarm excavation controllers to implementation in real-world applications.
First, a literature review of the behavioral rules of different types of insect colonies and the resulting structural patterns over the course of excavation was conducted. After identifying pertinent excavation laws, three different finite state machines were generated that relate to construction, search and rescue operations, and extraterrestrial exploration. After analyzing these finite state machines, it became apparent that they all shared a common controller. Then, agent-based NetLogo software was used to simulate a swarm of agents that run this controller, and a model for excavating behaviors and patterns was fit to the simulation data. This model predicts the tunnel shapes formed in the simulation as a function of the swarm size and a time delay, called the critical waiting period, in one of the state transitions. Thus, by controlling the individual agents' behavior, it was possible to control the structural outcomes of collective excavation in simulation.
To create an experimental testbed that could be used to physically implement the controller, a small foldable robotic platform was developed, and it's capabilities were tested in granular media. In order to characterize the granular media, force experiments were conducted and parameters were measured for resistive forces during an excavation cycle. The final experiment verified the robot's ability to engage in excavation and deposition, and to determine whether or not to begin the critical waiting period. This testbed can be expanded with multiple robots to conduct small-scale experiments on collective excavation, such as further exploring the effects of the critical waiting period on the resulting excavation pattern. In addition, investigating other factors like tuning digging efficiency or deposition proximity could help to transition the proposed bio-inspired swarm excavation controllers to implementation in real-world applications.
ContributorsHaggerty, Zz Mae (Author) / Berman, Spring M (Thesis advisor) / Aukes, Daniel (Committee member) / Marvi, Hamid (Committee member) / Arizona State University (Publisher)
Created2018
Description
Undulatory locomotion is a unique form of swimming that generates thrust through the propagation of a wave through a fish’s body. The proposed device utilizes a constrained compliant material with a single actuator to generate an undulatory motion. This paper draws inspiration from Anguilliformes and discusses the kinematics and dynamics of wave propagation of an underwater robot. A variety of parameters are explored through modeling and are optimized for thrust generation to better understand the device. This paper validates the theoretical spine behavior through experimentation and provides a path forward for future development in device optimization for various applications. Previous work developed devices that utilized either paired soft actuators or multiple redundant classical actuators that resulted in a complex prototype with intricate controls. The work of this paper contrasts with prior work in that it aims to achieve undulatory motion through passive actuation from a single actively driven point which simplifies the control. Through this work, the goal is to further explore low-cost soft robotics via bistable mechanisms, continuum material properties, and simplified modeling practices.
ContributorsKwan, Anson (Author) / Aukes, Daniel (Thesis advisor) / Zhang, Wenlong (Committee member) / Marvi, Hamid (Committee member) / Arizona State University (Publisher)
Created2023
Description
The construction industry holds great promise for improvement through the use of robotic technologies in its workflow. Although this industry was an early adopter of such technologies, growth in construction robotics research and its integration into current construction projects is progressing slowly. Some significant factors that have contributed to the slow pace are high capital costs, low return on investments, and decreasing public infrastructure budgets. Consequently, there is a clear need to reduce the overall costs associated with new construction robotics technologies, which would enable greater dissemination. One solution is to use a swarm robotics approach, in which a large group of relatively low-cost agents are employed to produce a target collective behavior. Given the development of deep learning algorithms for object detection and depth estimation, and novel technologies such as edge computing and augmented reality, it is becoming feasible to engineer low-cost swarm robotic systems that use a vision-only control approach. Toward this end, this thesis develops a vision-based controller for a mobile manipulator robot that relies only on visual feedback from a monocular camera and does not require prior information about the environment. The controller uses deep-learning based methods for object detection and depth estimation to accomplish material retrieval and deposition tasks. The controller is demonstrated in the Gazebo robot simulator for scenarios in which a mobile manipulator must autonomously identify, pick up, transport, and deposit individual blocks with specific colors and shapes. The thesis concludes with a discussion of possible future extensions to the proposed solution, including its scalability to swarm robotic systems.
ContributorsMuralikumar, Sushilkumar (Author) / Berman, Spring (Thesis advisor) / Marvi, Hamid (Committee member) / Lee, Hyunglae (Committee member) / Arizona State University (Publisher)
Created2022
Description
Regolith excavation systems are the enabling technology that must be developed in order to implement many of the plans for in-situ resource utilization (ISRU) that have been developed in recent years to aid in creating a lasting human presence on the surface of the Moon, Mars, and other celestial bodies. The majority of proposed ISRU excavation systems are integrated onto a wheeled mobility system, however none yet have proposed the use of a screw-propelled vehicle, which has the potential to augment and enhance the capabilities of the excavation system. As a result, CASPER, a novel screw-propelled excavation rover is developed and analyzed to determine its effectiveness as a ISRU excavation system. The excavation rate, power, velocity, cost of transport, and a new parameter, excavation transport rate, are analyzed for various configurations of the vehicle through mobility and excavation tests performed in silica sand. The optimal configuration yielded a 28.4 kg/hr excavation rate and11.2 m/min traverse rate with an overall system mass of 3.4 kg and power draw of26.3 W. CASPER’s mobility and excavation performance results are compared to four notable proposed ISRU excavation systems of various types. The results indicate that this architecture shows promise as an ISRU excavator because it provides significant excavation capability with low mass and power requirements.
ContributorsGreen, Marko (Author) / Marvi, Hamid (Thesis advisor) / Emady, Heather (Committee member) / Lee, Hyunglae (Committee member) / Arizona State University (Publisher)
Created2021
Description
JOOEE is a cube-shaped lunar robot with a simple yet robust design. JOOEE ishermetically sealed from its environment with no external actuators. Instead, JOOEE spins
three internal orthogonal flywheels to accumulate angular momentum and uses a solenoid
brake at each wheel to transfer the angular momentum to the body. This procedure allows
JOOEE to jump and hop along the lunar surface. The sudden transfer in angular momentum
during braking causes discontinuities in JOOEE’s dynamics that are best described using
a hybrid control framework. Due to the irregular methods of locomotion, the limited
resources on the lunar surface, and the unique mission objectives, optimal control profiles
are desired to minimize performance metrics such as time, energy, and impact velocity
during different maneuvers. This paper details the development of an optimization tool that
can handle JOOEE’s dynamics including the design of a hybrid control framework,
dynamics modeling and discretization, optimization cost functions and constraints, model
validation, and code acceleration techniques.
ContributorsBreaux, Christopher (Author) / Yong, Sze Z (Thesis advisor) / Marvi, Hamid (Committee member) / Xu, Zhe (Committee member) / Arizona State University (Publisher)
Created2021
Description
Mechanical impedance is a concept that is used to model biomechanical propertiesof human joints. These models can then be utilized to provide insight into the inner
workings of the human neuromuscular system or to provide insight into how to best
design controllers for robotic applications that either attempt to mimic capabilities of
the human neuromuscular system or physically interact with it. To further elucidate
patterns and properties of how the human neuromuscular system modulates mechanical
impedance at the human ankle joint, multiple studies were conducted. The first
study was to assess the ability of linear regression models to characterize the change
in stiffness - a component of mechanical impedance - seen at the human ankle during
the stance phase of walking in the Dorsiflexion-Plantarflexion (DP) direction. A
collection of biomechanical variables were used as input variables. The R^2 value of
the best performing model was 0.71. The second and third studies were performed to
showcase the ability of a newly developed twin dual-axis platform, which goes beyond
the limits of a single dual-axis platform, to quantify bilateral stiffness properties. The
second study quantified the bilateral mechanical stiffness of the human ankle joint
for healthy able-bodied subjects during the stance phase of walking and during quiet
standing in both the DP and inversion-eversion directions. Subjects showed a high
level of subject specific symmetry. Lastly, a similar bilateral ankle characterization
study was conducted on a set of subjects with multiple sclerosis, but only during
quiet standing and in the DP direction. Results showed a high level of discrepancy
between the subject’s most-affected and least-affected limbs with a larger range and
variance than in the healthy population.
ContributorsRussell, Joshua (Author) / Lee, Hyunglae (Thesis advisor) / Honeycutt, Claire (Committee member) / Marvi, Hamid (Committee member) / Arizona State University (Publisher)
Created2022