Search Content

Matching Items (3)

Filtering by

All Subjects: engineering

Endurance limit for HMA based on healing phenomenon using viscoelastic continuum damage analysis

Description

Perpetual Pavements, if properly designed and rehabilitated, it can last longer than 50 years without major structural rehabilitation. Fatigue endurance limit is a key parameter for designing perpetual pavements to mitigate bottom-up fatigue cracking. The endurance limit has not been implemented in the Mechanistic Empirical Pavement Design Guide software, currently known as DARWin-ME. This study was conducted as part of the National Cooperative Highway Research Program (NCHRP) Project 9-44A to develop a framework and mathematical methodology to determine the fatigue endurance limit using the uniaxial fatigue test. In this procedure, the endurance limit is defined as the allowable tensile strains at which a balance takes place between the fatigue damage during loading, and the healing during the rest periods between loading pulses. The viscoelastic continuum damage model was used to isolate time dependent damage and healing in hot mix asphalt from that due to fatigue. This study also included the development of a uniaxial fatigue test method and the associated data acquisition computer programs to conduct the test with and without rest period. Five factors that affect the fatigue and healing behavior of asphalt mixtures were evaluated: asphalt content, air voids, temperature, rest period and tensile strain. Based on the test results, two Pseudo Stiffness Ratio (PSR) regression models were developed. In the first model, the PSR was a function of the five factors and the number of loading cycles. In the second model, air voids, asphalt content, and temperature were replaced by the initial stiffness of the mix. In both models, the endurance limit was defined when PSR is equal to 1.0 (net damage is equal to zero). The results of the first model were compared to the results of a stiffness ratio model developed based on a parallel study using beam fatigue test (part of the same NCHRP 9-44A). The endurance limit values determined from uniaxial and beam fatigue tests showed very good correlation. A methodology was described on how to incorporate the second PSR model into fatigue analysis and damage using the DARWin-ME software. This would provide an effective and efficient methodology to design perpetual flexible pavements.

ContributorsZeiada, Waleed (Author) / Kaloush, Kamil (Thesis advisor) / Witczak, Matthew W. (Thesis advisor) / Zapata, Claudia (Committee member) / Mamlouk, Michael (Committee member) / Arizona State University (Publisher)

Created2012

Estimating Expansive Soil Field Suction Profiles Using a Soil Suction Surrogate

Description

Expansive clay soils, when subjected to substantial moisture change, can be extremely problematic causing various types of damage to lightly-loaded structures. Solving these problems requires an understanding of unsaturated soil mechanics. Soil suction, related to moisture content change, is important in the development of unsaturated soil properties and in the assessment of initial and final stress for heave computation. Direct measurement of soil suction on expansive clays to determine field suction profiles is quite limited due primarily to tradition and cost-driven geotechnical field investigation practices prioritizing water content measurement over soil suction measurement. This study employs a surrogate to estimate soil suction profiles for various sites consisting of clay soils with a Plasticity Index of greater than 15. The soil suction surrogate was used to determine suction profiles from existing geotechnical engineering expansive clay field investigations and a limited amount of directly measured suction profiles were also used. Equilibrium suction magnitudes and the depths to constant suction were obtained from the field suction profiles and results were compared to data found in the existing literature. Thornthwaite Moisture Index (TMI) is a climatic index to describe climatic conditions for a given region. Surface flux boundary conditions (i.e. covered and uncovered and irrigated and non-irrigated) were investigated and comparisons were made to the extent possible. Previous studies have presented correlations between TMI and equilibrium suction and TMI and depth to constant suction. Relationships within this study are presented and comparisons are made to existing relationships. Results and recommendations for further research are discussed.

ContributorsCuzme, Alan (Author) / Houston, Sandra (Thesis advisor) / Zapata, Claudia (Committee member) / Paassen, Leon van (Committee member) / Arizona State University (Publisher)

Created2018

Development of a Novel Aerogel-Based Modified Bituminous Materials

Description

Thermal susceptibility is one of the biggest challenges that asphalt pavements must overcome. Asphalt mixture’s thermal susceptibility can increase problems related to permanent deformation, and the expansion-contraction phenomenon triggers thermal cracking. Furthermore, there is a common worldwide interest in environmental impacts and pavements. Saving energy and mitigating the urban heat island (UHI) effect have been drawing the attention of researchers, governments, and industrial organizations. Pavements have been shown to play an important role in the UHI effect. Globally, about 90% of roadways are made of asphalt mixtures. The main objective of this research study involves the development and testing of an innovative aerogel-based product in the modification of asphalt mixtures to function as a material with unique thermal resistance properties, and potentially providing an urban cooling mechanism for the UHI. Other accomplishments included the development of test procedures to estimate the thermal conductivity of asphalt binders, the expansion-contraction of asphalt mixtures, and a computational tool to better understand the pavement’s thermal profile and stresses. Barriers related to the manufacturing and field implementation of the aerogel-based product were overcome. Unmodified and modified asphalt mixtures were manufactured at an asphalt plant to build pavement slabs. Thermocouples installed at top and bottom collected data daily. This data was valuable in understanding the temperature fluctuation of the pavement. Also, the mechanical properties of asphalt binders and mixtures with and without the novel product were evaluated in the laboratory. Fourier transform infrared (FTIR) and scanning electron microscope (SEM) analyses were also used to understand the interaction of the developed product with bituminous materials. The modified pavements showed desirable results in reducing overall pavement temperatures and suppressing the temperature gradient, a key to minimize thermal cracking. The comprehensive laboratory tests showed favorable outcomes for pavement performance. The use of a pavement design software, and life cycle/cost assessment studies supported the use of this newly developed technology. Modified pavements would perform better than control in distresses related to permanent deformation and thermal cracking; they reduce tire/pavement noise, require less raw material usage during their life cycle, and have lower life cycle cost compared to conventional pavements.

ContributorsObando Gamboa, Carlos Javier (Author) / Kaloush, Kamil (Thesis advisor) / Mamlouk, Michael (Committee member) / Ozer, Hasan (Committee member) / Fini, Elham (Committee member) / Zapata, Claudia (Committee member) / Arizona State University (Publisher)

Created2022