Matching Items (726)
Filtering by
- All Subjects: engineering
Description
Competitive Swimming is not only a sport, but also an invaluable life skill. As long as it has existed, people have wondered how to swim faster. There are a multitude of variables that go into any race and shockingly not much research around to scientifically approach the question. This study aims to investigate the drag forces behind a Swimmer’s race to give better insight as to what will slow a Swimmer down through simulations in ANSYS Fluent. Simple 2D simulations were made with a Swimmer in different positions and a flow of water moved over them. What was found was that different positions, or techniques, yield vastly different results. When following typical good technique, a Swimmer can expect to be approximately 136% less drag forces compared to a typical bad technique. Additionally, small errors such as not being perfectly horizontal can lead to a difference of around 100 Newtons of drag force between perfectly horizontal and a 5-degree angle of attack. Another observation made was that errors are exacerbated by being near a wall, so Swimming in an end lane next to the pool wall leads to about 57% more drag forces that any other lane. Still, there are many more observations to be made as there is so much more to research in swimming.
ContributorsBenavidez, Kevin A (Author) / Murthy, Dr. Raghavendra (Thesis director) / Huang, Dr. Huei-Ping (Committee member) / Mechanical and Aerospace Engineering Program (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2020-05
Description
NIPAAm co-DEAEMA hydrogels are a potential solution for sustained, local delivery of ketorolac tromethamine. Current methods of postoperative pain management, such as local anesthetics, NSAIDs, and opioids, can be improved by minimizing side effects while still effectively treating severe and extreme pain. Though high doses of ketorolac can be toxic, sustained, local delivery via hydrogels offers a promising solution. Four ketorolac release studies were conducted using PNDJ hydrogels formulated by Sonoran Biosciences. The first two studies tested a range of JAAm concentration between 1.4 and 2.2 mole percent. Both had high initial release rates lasting less than 7 days and appeared to be unaffected by JAAm content. Tobramycin slowed down the release of ketorolac but was unable to sustain release for more than 6 days. Incorporating DEAEMA prolonged the release of ketorolac for up to 14 days with significant reductions in initial burst release rate. Low LCST of NIPAAM co-DEAEMA polymer is problematic for even drug distribution and future in vivo applications.
ContributorsHui, Nathan (Author) / Vernon, Brent (Thesis director) / Heffernan, John (Committee member) / School of International Letters and Cultures (Contributor) / Harrington Bioengineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2020-05
Description
All around the automotive industry, the chassis dynamometer exists in a variety of configurations but all function to provide one common goal. The underlying goal is to measure a vehicle’s performance by measuring torque output and taking that measurement to calculate horsepower. This data is crucial in situations of testing development vehicles or for tuning heavily modified vehicles. While the current models in the industry serve their purposes for what they were intended to do, in theory, an additional system can be introduced to the dyno to render the system into an electric generator.
The hardware will consist of electric motors functioning as a generator by reversing the rotation of the motor (regenerative braking). Using the dynamometer with the additional motor system paired with a local battery, the entire system can be run off by their tuning service. When considering the Dynojet and Dynapack dynamometer, it was calculated that an estimated return of 81.5% of electricity used can be generated. Different factors such as how frequent the dyno is used and for how long affect the savings. With a generous estimate of 6 hours dyno run time a day for 250 business days and the cost of electricity being 13.19 cents/kwh the Dynapack came out to $326.45 a year and $1424.52 for the Dynojet. With the return of electricity, the amount saved comes out to $266.18 for the Dynapack and $1161.50 for the Dynojet. This will alleviate electrical costs dramatically in the long term allowing for performance shops to invest their saved money into more tools and equipment.
The hardware will consist of electric motors functioning as a generator by reversing the rotation of the motor (regenerative braking). Using the dynamometer with the additional motor system paired with a local battery, the entire system can be run off by their tuning service. When considering the Dynojet and Dynapack dynamometer, it was calculated that an estimated return of 81.5% of electricity used can be generated. Different factors such as how frequent the dyno is used and for how long affect the savings. With a generous estimate of 6 hours dyno run time a day for 250 business days and the cost of electricity being 13.19 cents/kwh the Dynapack came out to $326.45 a year and $1424.52 for the Dynojet. With the return of electricity, the amount saved comes out to $266.18 for the Dynapack and $1161.50 for the Dynojet. This will alleviate electrical costs dramatically in the long term allowing for performance shops to invest their saved money into more tools and equipment.
ContributorsCrisostomo, Ryan-Xavier Eddie (Author) / Contes, James (Thesis director) / Wishart, Jeffrey (Committee member) / Engineering Programs (Contributor) / Barrett, The Honors College (Contributor)
Created2020-05
Description
Current methods measuring the consumption of prescription and illicit drugs are often hampered by innate limitations, the data is slow and often restricted, which can impact the relevance and robustness of the associated data. Here, wastewater-based epidemiology (WBE) was applied as an alternative metric to measure trends in the consumption of twelve narcotics within a collegiate setting from January 2018 to May 2018 at a Southwestern U.S. university. The present follow-up study was designed to identify potential changes in the consumption patterns of prescription and illicit drugs as the academic year progressed. Samples were collected from two sites that capture nearly 100% of campus-generated wastewater. Seven consecutive 24-hour composite raw wastewater samples were collected each month (n = 68) from both locations. The study identified the average consumption of select narcotics, in units of mg/day/1000 persons in the following order: cocaine (528 ± 266), heroin (404 ± 315), methylphenidate (343 ± 396), amphetamine (308 ±105), ecstasy (MDMA; 114 ± 198), oxycodone (57 ± 28), methadone (58 ± 73), and codeine (84 ± 40). The consumption of oxycodone, methadone, heroin, and cocaine were identified as statistically lower in the Spring 2018 semester compared to the Fall 2017. Universities may need to increase drug education for the fall semester to lower the consumption of drugs in that semester. Data from this research encompasses both human health and the built environment by evaluating public health through collection of municipal wastewater, allowing public health officials rapid and robust narcotic consumption data while maintaining the anonymity of the students, faculty, and staff.
ContributorsCarlson, Alyssa Rose (Author) / Halden, Rolf (Thesis director) / Gushgari, Adam (Committee member) / School of Human Evolution & Social Change (Contributor) / Chemical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2020-05
Description
The goal of this thesis project was to build an understanding of supersonic projectile dynamics through the creation of a trajectory model that incorporates several different aerodynamic concepts and builds a criteria for the stability of a projectile. This was done iteratively where the model was built from a foundation of kinematics with various aerodynamic principles being added incrementally. The primary aerodynamic principle that influenced the trajectory of the projectile was in the coefficient of drag. The drag coefficient was split into three primary components: the form drag, skin friction drag, and base pressure drag. These together made up the core of the model, additional complexity served to increase the accuracy of the model and generalize to different projectile profiles.
ContributorsBlair, Martin (Co-author) / Armenta, Francisco (Co-author) / Takahashi, Timothy (Thesis director) / Herrmann, Marcus (Committee member) / Mechanical and Aerospace Engineering Program (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2020-05
Description
Accessible STEAM (Science, Technology, Engineering, Art, and Mathematics) education is imperative in creating the future innovators of the world. This business proposal is for a K-8 STEAM Museum to be built in the Novus Innovation Corridor on Arizona State University (ASU)’s Tempe campus. The museum will host dynamic spaces that are constantly growing and evolving as exhibits are built by interdisciplinary capstone student groups- creating an internal capstone project pipeline. The intention of the museum is to create an interactive environment that fosters curiosity and creativity while acting as supplemental learning material to Arizona K-8 curriculum. The space intends to serve the greater Phoenix area community and will cater to underrepresented audiences through the development of accessible education rooted in equality and inclusivity.
ContributorsPeters, Abigail J (Author) / McCarville, Daniel R. (Thesis director) / Juarez, Joseph (Committee member) / Industrial, Systems & Operations Engineering Prgm (Contributor) / Barrett, The Honors College (Contributor)
Created2020-05
Description
Technology has managed to seamlessly grow into every industry fathomable without much resistance. This could be due to the fact that the majority of industries that have integrated technology have lacked insurmountable barriers which could hold back strategic innovations. Even with a wide array of industries applying technology to their framework, some haven’t managed to reach the true capability of technological advances. One industry that has both taken wide advantage of technology while also barely scraping the surface of the depth behind its potential has been politics. Electronic voting booths, targeted online marketing campaigns, and live streamed debates have been integral parts of our modern-day political environment, however, approval rating-based forecasting for elections has been an area that isn’t commonly referenced by both large political players.
In an age of information where data can be extracted just about anywhere and interpolated using extensive statistical processing, the fact that systems modeling isn’t a pillar of campaign efforts seems ludicrous. A field that is heavily dependent on pivoting concern based on lack of support would make sense to heavily depend on a modeling system that can accurately predict future points of interest.
This report aims to lay the foundation that can be built upon through providing pitfalls in potential modeling, importance of a modeling system, and a barebones skeleton model in AnyLogic with a scheme of how the model would work. I hope this report can serve political interests by providing context on which modeling can accurately provide insight.
ContributorsSchiazzano, John (Author) / McCarville, Daniel R. (Thesis director) / Juarez, Joseph (Committee member) / Industrial, Systems & Operations Engineering Prgm (Contributor) / Barrett, The Honors College (Contributor)
Created2020-05
Description
The diagnosis for an attention deficit/hyperactivity disorder (ADHD) in children is heavily based on teacher or parent opinion, and not on scientific evidence. This causes children to be wrongly diagnosed with a disorder and be prescribed medicine that they do not need to be taking. This paper discusses a project that was completed for the Child Study Lab (CSL) preschool at Arizona State University (ASU), in which children’s activity within a classroom was automatically recorded using ultra-wideband technology. This project’s goal was to gather location data on the children in the CSL and analyze and assess the collected data for any patterns of behavior. The hope was that if a child’s data displayed a pattern that strayed from the norm, that this analysis could pose as a more objective way to indicate that a child may have an attention deficit problem. Fractal Dimensions and Levy Flights were researched and applied to the data analysis portion of this project.
ContributorsKjerstad, Kamryn R (Author) / Kozicki, Michael (Thesis director) / Kupfer, Anne (Committee member) / Electrical Engineering Program (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2020-05
Description
The relationship between video games and education is something that has been studied extensively in academia. Based upon these studies a new concept was created, gamification. Gamification is the next step in video game research to analyze why video games enhance learning. The interest and research into this concept have developed so much so that it has become its own topic area for research. This study is looking to analyze the effect that gamification has on not only learning, but also self-efficacy. Through a choose your own adventure game, the knowledge and self-efficacy of participants will be examined to observe the differences when learning difficult engineering concepts with and without gamification. It is expected that participants that experienced training through gamification will demonstrate deeper learning and higher self-efficacy than trained through a video. Furthermore, it is anticipated that some video trained participants’ self-efficacy will increase; however, their comprehension will be less than participants trained through gamification. The results of this study can help promote the interest in researching gamification and education, while influencing educators to corporate gamification elements when designing their courses. Moreover, this study continued through adaptation and integration into a statics forces class, investigated if the same results can be found within a classroom setting.
ContributorsKanechika, Amber (Author) / Craig, Scotty (Thesis director) / Roscoe, Rod (Committee member) / Engineering Programs (Contributor) / Barrett, The Honors College (Contributor)
Created2020-05
Description
This paper investigates Surface Mechanical Attrition Treatment (SMAT) and the influence of treatment temperature and initial sample surface finish on the corrosion resistance of 7075-T651 aluminum alloy. Ambient SMAT was performed on AA7075 samples polished to 80-grit initial surface roughness. Potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) tests were used to characterize the corrosion behavior of samples before and after SMAT. Electrochemical tests indicated an improved corrosion resistance after application of SMAT process. The observed improvements in corrosion properties are potentially due to microstructural changes in the material surface induced by SMAT which encouraged the formation of a passive oxide layer. Further testing and research are required to understand the corrosion related effects of cryogenic SMAT and initial-surface finish as the COVID-19 pandemic inhibited experimentation plans.
ContributorsDeorio, Jordan Anthony (Author) / Solanki, Kiran (Thesis director) / Rajagopalan, Jagannathan (Committee member) / Mechanical and Aerospace Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2020-05