Matching Items (6)
Filtering by
- All Subjects: chemical engineering
- Creators: Emady, Heather
- Member of: Barrett, The Honors College Thesis/Creative Project Collection
Description
The objective of this research study is to assess the effectiveness of a poster-based messaging campaign and engineering-based activities for middle school and high school students to encourage students to explore and to pursue chemical engineering. Additionally, presentations are incorporated into both methods to provide context and improve understanding of the presented poster material or activity. Pre-assessments and post-assessments are the quantitative method of measuring effectiveness. For the poster campaign, ASU juniors and seniors participated in the poster campaign by producing socially relevant messages about their research or aspirations to address relevant chemical engineering problems. For the engineering-based activity, high school students participated in an Ira A. Fulton Schools of Engineering program "Young Engineers Shape the World" in which the students participated in six-hour event learning about four engineering disciplines, and the chemical engineering presentation and activity was conducted in one of the sessions. Pre-assessments were given at the beginning of the event, and the post-assessments were provided towards the end of the event. This honors thesis project will analyze the collected data.
ContributorsBueno, Daniel Tolentino (Author) / Ganesh, Tirupalavanam (Thesis director) / Parker, Hope (Committee member) / Chemical Engineering Program (Contributor) / School of Historical, Philosophical and Religious Studies (Contributor) / W. P. Carey School of Business (Contributor) / Barrett, The Honors College (Contributor)
Created2017-05
Description
This report investigates the effects of autolyzing, fermentation medium, fermentation temperature, and proofing medium on the growth and porosity of 50% whole wheat sourdough bread. A model was designed using a 24 statistical design of experiment with replicates to screen and quantify the individual and combined effects of the aforementioned factors on the area of a 1 cm cross-sectional cut from each loaf. Fermentation temperature had the single largest effect, with colder fermented loaves being on average 10 cm2 larger than their warmer fermented counter parts. Autolyzing had little individual effect, but the strengthened gluten network abated some of the degassing and overproofing that is a consequent handling the dough or letting it ferment too much. This investigation quantifies how to maximize gluten development and yeast growth to create the airiest whole wheat sourdough, a healthier and easier to digest bread than many commercially available.
ContributorsLay, Michael Loren (Author) / Emady, Heather (Thesis director) / Adepu, Manogna (Committee member) / School of Sustainability (Contributor) / Chemical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
Description
Rotary drums are commonly used for their high heat and mass transfer rates in the manufacture of pharmaceuticals, cement, food, and other particulate products. These processes are difficult to model because the particulate behavior is governed by the process conditions such as particle size, particle size distribution, shape, composition, and operating parameters, such as fill level and rotation rate. More research on heat transfer in rotary drums will increase operating efficiency, leading to tremendous energy savings on a global scale. This study investigates the effects of drum fill level and rotation rate on the steady-state average particle bed temperature. 3 mm silica beads and a stainless steel rotary drum were used at fill levels ranging from 10 \u2014 25 % and rotation rates from 2 \u2014 10 rpm. Four heat guns were used to heat the system via conduction and convection, and an infrared camera was used to record temperature data. A three-level, two-factor, full-factorial design of experiments was employed to determine the effects of each factor on the steady-state average bed temperature. Low fill level and high rotation rate resulted in higher steady-state average bed temperatures. A quantitative model showed that rotation rate had a larger impact on the steady-state bed temperature than fill level.
ContributorsBoepple, Brandon Richard (Author) / Emady, Heather (Thesis director) / Adepu, Manogna (Committee member) / W.P. Carey School of Business (Contributor) / Chemical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
Description
This thesis analyzed Canon GPR-30 Black Standard Yield Toner in hopes to gain better understanding of the additives and plastic used in a popular photocopier toner formulation. By analyzing the toner’s composition from the perspective of its recyclability and potential to be manufactured using recycled plastic, this thesis hoped to fill a gap in current literature regarding how toner fits into a circular economy. While the analysis of the selected toner was ultimately inconclusive, three hypotheses about the toner’s composition are put forth based upon data from differential scanning calorimetry (DSC), solubility analysis, and Fourier Transform Infrared (FTIR) spectroscopy experimentation. It is hypothesized that the toner is most likely composed of either polymethyl methacrylate (PMMA) or polyethylene terephthalate (PET). Both of these polymers have characteristic FTIR peaks that were exhibited in the toner spectra and both polymers exhibit similar solubility behavior to toner samples. However, the glass transition temperature and melting temperature of the toner sampled were 58℃ and 74.5℃ respectively, both of which are much lower than that of PMMA and PET. Thus, a third hypothesis that would better support DSC findings is that the toner is primarily composed of nylon 6,6. While DSC data best matches this polymer, FTIR data seems to rule out nylon 6,6 as an option because its characteristic peaks were not found in experimental data. Thus, the Canon GPR-30 Black Standard Yield Toner is probably made from either PMMA or PET. Both PMMA and PET are 100% recyclable plastics which are commonly repurposed at recycling facilities, however, unknowns regarding toner additives make it difficult to determine how this toner would be recycled. If the printing industry hopes to move towards a circular economy in which plastic can be recycled to use towards toner manufacturing and toner can be “unprinted” from paper to be recycled into new toner, it is likely that monetary incentives or government regulations will need to be introduced to promote the sharing of toner formulations for recycling purposes.
ContributorsChase, Jasmine (Author) / Green, Matthew (Thesis director) / Emady, Heather (Committee member) / Barrett, The Honors College (Contributor) / School of Mathematical and Statistical Sciences (Contributor) / Mechanical and Aerospace Engineering Program (Contributor)
Created2023-05
ContributorsChase, Jasmine (Author) / Green, Matthew (Thesis director) / Emady, Heather (Committee member) / Barrett, The Honors College (Contributor) / School of Mathematical and Statistical Sciences (Contributor) / Mechanical and Aerospace Engineering Program (Contributor)
Created2023-05
ContributorsChase, Jasmine (Author) / Green, Matthew (Thesis director) / Emady, Heather (Committee member) / Barrett, The Honors College (Contributor) / School of Mathematical and Statistical Sciences (Contributor) / Mechanical and Aerospace Engineering Program (Contributor)
Created2023-05