Matching Items (4)
Filtering by

Clear all filters

136862-Thumbnail Image.png
DescriptionThere is a growing market for lightweight firearm barrels. Currently this market is dominated by Aluminum and Carbon fiber barrels, however, Gunwright, LLC proposes an innovative new way to manufacture Titanium firearm barrels. This report offers insight into potential customers and existing competitors.
ContributorsKeberle, Katelyn Frances (Author) / Adams, Jim (Thesis director) / Newman, Nathan (Committee member) / Barrett, The Honors College (Contributor) / Materials Science and Engineering Program (Contributor)
Created2014-05
134935-Thumbnail Image.png
Description
The main objective of this project is to create a hydrogel based material system to capture and release CCRF-CEM Leukemia cancer cells via chemo-mechanical modulation. This system is composed of an aptamer-functionalized hydrogel thin film at the bottom of a microfluidic channel, which changes its film thickness as the temperature

The main objective of this project is to create a hydrogel based material system to capture and release CCRF-CEM Leukemia cancer cells via chemo-mechanical modulation. This system is composed of an aptamer-functionalized hydrogel thin film at the bottom of a microfluidic channel, which changes its film thickness as the temperature of the fluid in the system changes. The functionalized hydrogel film has been created as the primary steps to creating the microfluidic device that could capture and release leukemia cells by turning the temperature of the fluid and length of exposure. Circulating tumor cells have recently become a highly studied area since they have become associated with the likelihood of patient survival. Further, circulating tumor cells can be used to determine changes in the genome of the cancer leading to targeted treatment. First, the aptamers were attached onto the hydrogel through an EDC/NHS reaction. The aptamers were verified to be attached onto the hydrogel through FTIR spectroscopy. The cell capture experiments were completed by exposing the hydrogel to a solution of leukemia cells for 10 minutes at room temperature. The cell release experiments were completed by exposing the hydrogel to a 40°C solution. Several capture and release experiments were completed to measure how many cells could be captured, how quickly, and how many cells captured were released. The aptamers were chemically attached to the hydrogel. 300 cells per square millimeter could be captured at a time in a 10 minute time period and released in a 5 minute period. Of the cells captured, 96% of them were alive once caught. 99% of cells caught were released once exposed to elevated temperature. The project opens the possibility to quickly and efficiently capture and release tumor cells using only changes in temperature. Further, most of the cells that were captured were alive and nearly all of those were released leading to high survival and capture efficiency.
ContributorsPaxton, Rebecca Joanne (Author) / Stephanopoulos, Nicholas (Thesis director) / He, Ximin (Committee member) / Gould, Ian (Committee member) / Materials Science and Engineering Program (Contributor) / School of Molecular Sciences (Contributor) / Barrett, The Honors College (Contributor)
Created2016-12
135168-Thumbnail Image.png
Description
How can we change what it means to be a human? Products can be used that will allow for near-instantaneous communication with one’s friends and family wherever they are: and the newest devices do not have to be even carried around, as they can be worn instead. Wearable electronics are

How can we change what it means to be a human? Products can be used that will allow for near-instantaneous communication with one’s friends and family wherever they are: and the newest devices do not have to be even carried around, as they can be worn instead. Wearable electronics are quickly becoming very popular, with 232.0 million wearable devices sold in 2015. This report provides an overview of current and developing wearable devices, investigates the characteristics of the average buyer for these different types of devices. Finally, marketing strategies are suggested. This work was completed in conjunction with a capstone project with Intel, where three objectives were achieved: First, a universal strain tester that could strain samples cyclically in a manner similar to the body was designed. This equipment was especially designed to be flexible in the testing conditions it could be exposed to, so samples could be tested at elevated temperatures or even underwater. Next, dogbone shaped samples for the testing of Young’s Modulus and elongation to failure were produced, and the cut quality of laser, water-jet, and die-cutting was compared in order to select the most defect-free method for reliable testing. Polydimethylsiloxane (PDMS) is a fantastic candidate material for wearable electronics, however there is some discrepancies in the literature—such as from Eleni et. al—about the impact of ultraviolet radiation on the mechanical properties. By conducting accelerated aging tests simulating up to five years exposure to the sun, it was determined that ultraviolet-induced cross-linking of the polymer chains does occur, leading to severe embrittlement (strain to failure reduced from 3.27 to 0.06 in some cases, reduction to approximately 0.21 on average). As simulated tests of possible usage conditions required strains of at least 0.50-0.70, a variety of solutions were suggested to reduce this embrittlement. This project can lead to standardization of wearables electronics testing methods for more reliable predictions about the device behavior, whether that device is a simple pedometer or something that allows the visually impaired to “see”, such as Toyota’s Blaid.
ContributorsNiebroski, Alexander Wayne (Author) / Adams, James (Thesis director) / Anwar, Shahriar (Committee member) / Materials Science and Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
130861-Thumbnail Image.png
Description

The purpose of this project is to analyze the current state of cancer nanomedicine and its challenges. Cancer is the second most deadly illness in the United States after heart disease. Nanomedicine, the use of materials between 1 and 100 nm to for the purpose of addressing healthcare-related problems, is

The purpose of this project is to analyze the current state of cancer nanomedicine and its challenges. Cancer is the second most deadly illness in the United States after heart disease. Nanomedicine, the use of materials between 1 and 100 nm to for the purpose of addressing healthcare-related problems, is particularly suited for treating it since nanoparticles have properties such as high surface area-to-volume ratios and favorable drug release profiles that make them more suitable for tasks such as consistent drug delivery to tumor tissue. The questions posed are: What are the current nanomedical treatments for cancer? What are the technical, social, and legal challenges related to nanomedical treatments and how can they be overcome? To answer the questions mentioned above, information from several scientific papers on nanomedical treatments for cancer as well as from social science journals was synthesized. Based on the findings, nanomedicine has a wide range of applications for cancer drug delivery, detection, and immunotherapy. The main technical challenge related to nanomedical treatments is navigating through biological barriers such as the mononuclear phagocyte system, the kidney, the blood-brain barrier, and the tumor microenvironment. Current approaches to meeting this challenge include altering the size, shape, and charge of nanoparticles for easier passage. The main social and legal challenge related to nanomedical treatments is the difficulty of regulating them due to factors such as the near impossibility of detecting nanowaste. Current approaches to meeting this challenge include the use of techniques such as scanning tunneling microscopy and atomic force microscopy to help distinguish nanowaste from the surroundings. More research will have to be done in these and other areas to enhance a major cancer-fighting tool.

ContributorsAbraham, Alfred Francy (Author) / Brian, Jennifer (Thesis director) / Liu, Yan (Committee member) / Materials Science and Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2021-05