Matching Items (1,212)
Filtering by
- All Subjects: psychology
- All Subjects: Mechanical Engineering
Description
Production from a high pressure gas well at a high production-rate encounters the risk of operating near the choking condition for a compressible flow in porous media. The unbounded gas pressure gradient near the point of choking, which is located near the wellbore, generates an effective tensile stress on the porous rock frame. This tensile stress almost always exceeds the tensile strength of the rock and it causes a tensile failure of the rock, leading to wellbore instability. In a porous rock, not all pores are choked at the same flow rate, and when just one pore is choked, the flow through the entire porous medium should be considered choked as the gas pressure gradient at the point of choking becomes singular. This thesis investigates the choking condition for compressible gas flow in a single microscopic pore. Quasi-one-dimensional analysis and axisymmetric numerical simulations of compressible gas flow in a pore scale varicose tube with a number of bumps are carried out, and the local Mach number and pressure along the tube are computed for the flow near choking condition. The effects of tube length, inlet-to-outlet pressure ratio, the number of bumps and the amplitude of the bumps on the choking condition are obtained. These critical values provide guidance for avoiding the choking condition in practice.
ContributorsYuan, Jing (Author) / Chen, Kangping (Thesis advisor) / Wang, Liping (Committee member) / Huang, Huei-Ping (Committee member) / Arizona State University (Publisher)
Created2013
Description
The purpose of this research study provided observational techniques and Applied Behavior Analysis (ABA) prompts and fading procedures to analyze music therapist-child interaction for child with autism spectrum disorder. Impaired social interaction is the primary symptom of a child with autism spectrum disorder. However, social interaction exists everywhere and throughout human life. Therefore, to improve interaction is the primary and significant goal in music therapy treatment for a child with autism spectrum disorder. The music therapist designs a series of music therapy activity interventions in order to create a therapeutic environment, based on a child's interests and favorite activities. Additionally, the music therapist utilizes the music to build the quality of relationship and interaction with child and support child practicing interaction with the therapist. Then music therapist utilizes the process of interaction to improve child's social interaction. Once the child achieves at desired behavior, he/she has ability to apply the music therapy techniques independently in the real world situations, such as family and schools that the child has learned throughout the process of interaction with therapist. The participants were three children with autism spectrum disorder and two certified music therapists (MT-BC). The researcher calculated the number of prompts and cues which the therapists provided, and the number of appropriate responses by each child in each activity intervention. Then the researcher utilized Applied Behavior Analysis (ABA), prompt and fading procedure in order to analyze the progress of therapist-child interactions during the sessions. The result showed that the children had improvement in the interactions with their therapist.
ContributorsLiao, Yin-chun (Author) / Crowe, Barbara J. (Thesis advisor) / Rio, Robin (Committee member) / Dishion, Thomas J. (Committee member) / Arizona State University (Publisher)
Created2013
Description
The objective of this thesis was to compare various approaches for classification of the `good' and `bad' parts via non-destructive resonance testing methods by collecting and analyzing experimental data in the frequency and time domains. A Laser Scanning Vibrometer was employed to measure vibrations samples in order to determine the spectral characteristics such as natural frequencies and amplitudes. Statistical pattern recognition tools such as Hilbert Huang, Fisher's Discriminant, and Neural Network were used to identify and classify the unknown samples whether they are defective or not. In this work, a Finite Element Analysis software packages (ANSYS 13.0 and NASTRAN NX8.0) was used to obtain estimates of resonance frequencies in `good' and `bad' samples. Furthermore, a system identification approach was used to generate Auto-Regressive-Moving Average with exogenous component, Box-Jenkins, and Output Error models from experimental data that can be used for classification
ContributorsJameel, Osama (Author) / Redkar, Sangram (Thesis advisor) / Arizona State University (Publisher)
Created2013
Description
This study examined four research questions investigating relationships among the experience of trauma, identity development, distress, and positive change. There were 908 participants in the study, ranging in age from 18 to 24 which is known as the period of emerging adulthood. Participants completed an online survey regarding their exposure to trauma and reactions to these experiences. The first research question examined the experience of trauma for the sample. The second question examined group differences among the participant's identity status, gender, and posttraumatic stress disorder (PTSD) diagnostic status on the hypothesized variables. In general, comparisons among the four identity status groups found participants who experienced greater identity exploration (diffused and moratorium) experienced more distress, whereas the identity status groups that reported greater identity commitments (foreclosed and achieved) were associated with positive change. Similar findings were found for PTSD diagnostic status indicating more distress and identity exploration for participants with the diagnosis and more positive change and identity commitments for participants without the diagnosis. Female participants were found to experience more PTS symptoms, centrality of the trauma event, and positive growth than males. Examination of the relationships between trauma severity and posttraumatic growth revealed an inverted U-shaped relationship (quadratic) that was a significant improvement from the linear model. An S-shaped relationship (cubic) was found for the relationship between trauma exposure and posttraumatic growth. Regression analyses found the centrality of the trauma event to one's identity predicted identity distress above and beyond the experience of trauma. In addition, identity distress and the centrality of the trauma contributed to the variance for identity exploration, while only identity distress contributed to identity commitments. Finally, identity development significantly predicted positive change above and beyond, identity distress, centrality of the trauma event, and the experience of trauma. Collectively, these results found both distress and growth to be related to the experience of trauma. Distress within one's identity can contribute to difficulties in the psychosocial stage of identity development among emerging adults. However, the resolution of identity exploration towards commitments to goals, roles, and beliefs, can help trauma survivors experience resilience and growth after stressful experiences.
ContributorsWiley, Rachel (Author) / Robinson-Kurpius, Sharon (Thesis advisor) / Stamm, Jill (Committee member) / Kinnier, Richard (Committee member) / Arizona State University (Publisher)
Created2013
Description
The academic literature on science communication widely acknowledges a problem: science communication between experts and lay audiences is important, but it is not done well. General audience popular science books, however, carry a reputation for clear science communication and are understudied in the academic literature. For this doctoral dissertation, I utilize Sam Harris's The Moral Landscape, a general audience science book on the particularly thorny topic of neuroscientific approaches to morality, as a case-study to explore the possibility of using general audience science books as models for science communication more broadly. I conduct a literary analysis of the text that delimits the scope of its project, its intended audience, and the domains of science to be communicated. I also identify seven literary aspects of the text: three positive aspects that facilitate clarity and four negative aspects that interfere with lay public engagement. I conclude that The Moral Landscape relies on an assumed knowledge base and intuitions of its audience that cannot reasonably be expected of lay audiences; therefore, it cannot properly be construed as popular science communication. It nevertheless contains normative lessons for the broader science project, both in literary aspects to be salvaged and literary aspects and concepts to consciously be avoided and combated. I note that The Moral Landscape's failings can also be taken as an indication that typical descriptions of science communication offer under-detailed taxonomies of both audiences for science communication and the varieties of science communication aimed at those audiences. Future directions of study include rethinking appropriate target audiences for science literacy projects and developing a more discriminating taxonomy of both science communication and lay publics.
ContributorsJohnson, Nathan W (Author) / Robert, Jason S (Thesis advisor) / Creath, Richard (Committee member) / Martinez, Jacqueline (Committee member) / Sylvester, Edward (Committee member) / Lynch, John (Committee member) / Arizona State University (Publisher)
Created2013
Description
Recent research has identified affirmation of transcendence and exposure to violent Bible verses as being related to greater prejudice toward value-violating out-groups (Blogowska & Saroglou, 2012; Shen et al., 2013). Effects of exposure to specific Bible verses on attitudes toward out-groups have not been measured in combination with the Post-Critical Belief Scale developed by Hutsebaut (1996). The relationships between exposure to scriptural endorsements of prejudice, affirmation vs. disaffirmation of transcendence, literal vs. symbolic processing of religious content, and prejudice toward value-violating out-groups were examined using an online survey administered to a sample of U.S. adults (N=283). Greater affirmation of transcendence scores were linked to greater prejudice toward atheists and homosexuals and more favorable ratings of Christians and highly religious people. Lower affirmation of transcendence scores were linked to less favorable ratings of Christians and highly religious people and more favorable ratings of atheists. Exposure to scriptural endorsements of prejudice did not have a significant effect on levels of prejudice in this study.
ContributorsGrove, Richard (Author) / Robles, Elías (Thesis advisor) / Hall, Deborah (Committee member) / Schweitzer, Nicholas (Committee member) / Arizona State University (Publisher)
Created2013
Description
Each year, millions of aging women will experience menopause, a transition from reproductive capability to reproductive senescence. In women, this transition is characterized by depleted ovarian follicles, declines in levels of sex hormones, and a dysregulation of gonadotrophin feedback loops. Consequently, menopause is accompanied by hot flashes, urogenital atrophy, cognitive decline, and other symptoms that reduce quality of life. To ameliorate these negative consequences, estrogen-containing hormone therapy is prescribed. Findings from clinical and pre-clinical research studies suggest that menopausal hormone therapies can benefit memory and associated neural substrates. However, findings are variable, with some studies reporting null or even detrimental cognitive and neurobiological effects of these therapies. Thus, at present, treatment options for optimal cognitive and brain health outcomes in menopausal women are limited. As such, elucidating factors that influence the cognitive and neurobiological effects of menopausal hormone therapy represents an important need relevant to every aging woman. To this end, work in this dissertation has supported the hypothesis that multiple factors, including post-treatment circulating estrogen levels, experimental handling, type of estrogen treatment, and estrogen receptor activity, can impact the realization of cognitive benefits with Premarin hormone therapy. We found that the dose-dependent working memory benefits of subcutaneous Premarin administration were potentially regulated by the ratios of circulating estrogens present following treatment (Chapter 2). When we administered Premarin orally, it impaired memory (Chapter 3). Follow-up studies revealed that this impairment was likely due to the handling associated with treatment administration and the task difficulty of the memory measurement used (Chapters 3 and 4). Further, we demonstrated that the unique cognitive impacts of estrogens that become increased in circulation following Premarin treatments, such as estrone (Chapter 5), and their interactions with the estrogen receptors (Chapter 6), may influence the realization of hormone therapy-induced cognitive benefits. Future directions include assessing the mnemonic effects of: 1) individual biologically relevant estrogens and 2) clinically-used bioidentical hormone therapy combinations of estrogens. Taken together, information gathered from these studies can inform the development of novel hormone therapies in which these parameters are optimized.
ContributorsEngler-Chiurazzi, Elizabeth (Author) / Bimonte-Nelson, Heather A. (Thesis advisor) / Sanabria, Federico (Committee member) / Olive, Michael F (Committee member) / Hoffman, Steven (Committee member) / Arizona State University (Publisher)
Created2013
Description
Smoke entering a flight deck cabin has been an issue for commercial aircraft for many years. The issue for a flight crew is how to mitigate the smoke so that they can safely fly the aircraft. For this thesis, the feasibility of having a Negative Pressure System that utilizes the cabin altitude pressure and outside altitude pressure to remove smoke from a flight deck was studied. Existing procedures for flight crews call for a descent down to a safe level for depressurizing the aircraft before taking further action. This process takes crucial time that is critical to the flight crew's ability to keep aware of the situation. This process involves a flight crews coordination and fast thinking to manually take control of the aircraft; which has become increasing more difficult due to the advancements in aircraft automation. Unfortunately this is the only accepted procedure that is used by a flight crew. Other products merely displace the smoke. This displacement is after the time it takes for the flight crew to set up the smoke displacement unit with no guarantee that a flight crew will be able to see or use all of the aircraft's controls. The Negative Pressure System will work automatically and not only use similar components already found on the aircraft, but work in conjunction with the smoke detection system and pressurization system so smoke removal can begin without having to descend down to a lower altitude. In order for this system to work correctly many factors must be taken into consideration. The size of a flight deck varies from aircraft to aircraft, therefore the ability for the system to efficiently remove smoke from an aircraft is taken into consideration. For the system to be feasible on an aircraft the cost and weight must be taken into consideration as the added fuel consumption due to weight of the system may be the limiting factor for installing such a system on commercial aircraft.
ContributorsDavies, Russell (Author) / Rogers, Bradley (Thesis advisor) / Palmgren, Dale (Committee member) / Rajadas, John (Committee member) / Arizona State University (Publisher)
Created2013
Description
The friction condition is an important factor in controlling the compressing process in metalforming. The friction calibration maps (FCM) are widely used in estimating friction factors between the workpiece and die. However, in standard FEA, the friction condition is defined by friction coefficient factor (µ), while the FCM is used to a constant shear friction factors (m) to describe the friction condition. The purpose of this research is to find a method to convert the m factor to u factor, so that FEA can be used to simulate ring tests with µ. The research is carried out with FEA and Design of Experiment (DOE). FEA is used to simulate the ring compression test. A 2D quarter model is adopted as geometry model. A bilinear material model is used in nonlinear FEA. After the model is established, validation tests are conducted via the influence of Poisson's ratio on the ring compression test. It is shown that the established FEA model is valid especially if the Poisson's ratio is close to 0.5 in the setting of FEA. Material folding phenomena is present in this model, and µ factors are applied at all surfaces of the ring respectively. It is also found that the reduction ratio of the ring and the slopes of the FCM can be used to describe the deformation of the ring specimen. With the baseline FEA model, some formulas between the deformation parameters, material mechanical properties and µ factors are generated through the statistical analysis to the simulating results of the ring compression test. A method to substitute the m factor with µ factors for particular material by selecting and applying the µ factor in time sequence is found based on these formulas. By converting the m factor into µ factor, the cold forging can be simulated.
ContributorsKexiang (Author) / Shah, Jami (Thesis advisor) / Davidson, Joseph (Committee member) / Trimble, Steve (Committee member) / Arizona State University (Publisher)
Created2013
Description
Derived from the necessity to increase testing capabilities of hybrid rocket motor (HRM) propulsion systems for Daedalus Astronautics at Arizona State University, a small-scale motor and test stand were designed and developed to characterize all components of the system. The motor is designed for simple integration and setup, such that both the forward-end enclosure and end cap can be easily removed for rapid integration of components during testing. Each of the components of the motor is removable allowing for a broad range of testing capabilities. While examining injectors and their potential it is thought ideal to obtain the highest regression rates and overall motor performance possible. The oxidizer and fuel are N2O and hydroxyl-terminated polybutadiene (HTPB), respectively, due to previous experience and simplicity. The injector designs, selected for the same reasons, are designed such that they vary only in the swirl angle. This system provides the platform for characterizing the effects of varying said swirl angle on HRM performance.
ContributorsSummers, Matt H (Author) / Lee, Taewoo (Thesis advisor) / Chen, Kangping (Committee member) / Wells, Valana (Committee member) / Arizona State University (Publisher)
Created2013