Matching Items (7)
Filtering by

Clear all filters

Description

This study analyzes the feasibility of using algae cultivated from wastewater effluent to produce a biodiesel feedstock. The goal was to determine if the energy produced was greater than the operational energy consumed without consideration to constructing the system as well as the emissions and economic value associated with the

This study analyzes the feasibility of using algae cultivated from wastewater effluent to produce a biodiesel feedstock. The goal was to determine if the energy produced was greater than the operational energy consumed without consideration to constructing the system as well as the emissions and economic value associated with the process.

Four scenarios were created:
       1) high-lipid, dry extraction.
       2) high-lipid, wet extraction.
       3) low-lipid, dry extraction.
       4) low-lipid, wet extraction.
In all cases, the system required more energy than it produced. In high lipid scenarios, the energy produced is close to the energy consumed, and a positive net energy balance may be achieved with minor improvements in technology or accounting for coproducts. In the low lipid scenarios, the energy balance is too negative to be considered feasible. Therefore the lipid content affects the decision to implement algae cultivation.

The dry extraction and the wet extraction both require some level of mechanical drying and this makes the two methods yield similar results in terms of the energy analysis. Therefore, the extraction method does not dramatically affect the decision for implementing algae-based oil production from an energetic standpoint. The economic value of the oil in both high lipid scenarios results in a net profit despite the negative net energy. Emission calculations resulted in avoiding a significant amount of CO2 for high lipid scenarios but not for the low lipid scenarios. The CO2 avoided does not account for non-lipid biomass, so this number is an underestimation of the final CO2 avoided from the end products.

While the term "CO2 avoided" has been used for this study, it should be noted that this CO2 would be emitted upon use as a fuel source. These emissions, however, are not “new” CO2 because it has already been emitted and is being captured and recycled. Currently, literature is very divisive on the lipid content present in algae and this study shows that lipid content has a tremendous affect on energy and emissions impacts. The type of algae that can grow in wastewater effluent also should be investigated as well as the conditions that promote high lipid accumulation. The dewatering phase must be improved as it is extremely energy intensive and dominates the operational energy balance.

In order to compete, wet extraction must have a much more significant effect on the drying phase and must avoid the use of the human toxicants methanol and chloroform. Additionally, while the construction phase was beyond the scope of this project it may be a critical aspect in determining the feasibility these systems. Future research in this field should focus on lipid production, optimizing the belt dryer or finding a different method of dewatering, and allocating the coproducts.

Created2012-05
135442-Thumbnail Image.png
Description
Within recent years, metal-organic frameworks, or MOF’s, have gained a lot of attention in the materials research community. These micro-porous materials are constructed of a metal oxide core and organic linkers, and have a wide-variety of applications due to their extensive material characteristic possibilities. The focus of this study is

Within recent years, metal-organic frameworks, or MOF’s, have gained a lot of attention in the materials research community. These micro-porous materials are constructed of a metal oxide core and organic linkers, and have a wide-variety of applications due to their extensive material characteristic possibilities. The focus of this study is the MOF-5 material, specifically its chemical stability in air. The MOF-5 material has a large pore size of 8 Å, and aperture sizes of 15 and 12 Å. The pore size, pore functionality, and physically stable structure makes MOF-5 a desirable material. MOF-5 holds applications in gas/liquid separation, catalysis, and gas storage. The main problem with the MOF-5 material, however, is its instability in atmospheric air. This inherent instability is due to the water in air binding to the zinc-oxide core, effectively changing the material and its structure. Because of this material weakness, the MOF-5 material is difficult to be utilized in industrial applications. Through the research efforts proposed by this study, the stability of the MOF-5 powder and membrane were studied. MOF-5 powder and a MOF-5 membrane were synthesized and characterized using XRD analysis. In an attempt to improve the stability of MOF-5 in air, methyl groups were added to the organic linker in order to hinder the interaction of water with the Zn4O core. This was done by replacing the terepthalic acid organic linker with 2,5-dimethyl terephthalic acid in the powder and membrane synthesis steps. The methyl-modified MOF-5 powder was found to be stable after several days of exposure to air while the MOF-5 powder exhibited significant crystalline change. The methyl-modified membrane was found to be unstable when synthesized using the same procedure as the MOF-5 membrane.
ContributorsAnderson, Anthony David (Author) / Lin, Jerry Y.S. (Thesis director) / Ibrahim, Amr (Committee member) / Chemical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
134453-Thumbnail Image.png
Description
Hydrothermal Liquefaction of Algae represents one of many pathways for the sustainable replacement of fossil fuels in transportation. When processing and researching algal biofuel, determination of the higher heating value (HHV) is paramount. Bomb calorimetry represents to current method for direct determination of HHV. When determining HHV’s indirectly, the industry

Hydrothermal Liquefaction of Algae represents one of many pathways for the sustainable replacement of fossil fuels in transportation. When processing and researching algal biofuel, determination of the higher heating value (HHV) is paramount. Bomb calorimetry represents to current method for direct determination of HHV. When determining HHV’s indirectly, the industry standard is using one of many linear correlations relating elemental composition to HHV. Most of these correlations were developed from coal industry data, meaning that they do not necessarily fit algal product data well. In this study bomb calorimetry data and CHNS/O elemental composition data were collected for Chlorella, Micract, GS 5587.1, Kirchnella, and Gal 87.1 MM8 algae species. This data was added to CHNS/O and HHV values for other algal products in literature, and utilized to test the accuracy of the Dulong, Gumz, Vandralek and Boie correlations for algae products. Several preliminary algae specific correlations were proposed through a linear regression model of the data. Of the 5 samples tested, Kirchnella exhibited the highest HHV (23.2405 ± 0.0216 MJ/kg) and Chlorella exhibited the lowest (20.2055 ± 0.0484 MJ/kg). For both the experimental, and literature CHNS/O vs HHV data, the Vandralek and Boie correlations provided the best approximations in this study. For the totality of the data collected and researched in this study, 6 of 8 proposed correlations outperformed the Vandralek equation for HHV approximation. The most promising proposed correlations incorporated multiple linear regressions for elemental fractions of CHS, CHSO and CHNSO. Being that only 20 distinct algal product samples were regressed to create the proposed correlations, more data should be incorporated before publication of a final correlation. This study should serve as a starting point for the compilation of an exhaustive database for algal product assay and HHV data.
ContributorsCopp, Connor Joseph (Author) / Deng, Shuguang (Thesis director) / Muppaneni, Tapaswy (Committee member) / Chemical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2017-05
134902-Thumbnail Image.png
Description
Metal-organic frameworks (MOFs) are a new set of porous materials comprised of metals or metal clusters bonded together in a coordination system by organic linkers. They are becoming popular for gas separations due to their abilities to be tailored toward specific applications. Zirconium MOFs in particular are known for their

Metal-organic frameworks (MOFs) are a new set of porous materials comprised of metals or metal clusters bonded together in a coordination system by organic linkers. They are becoming popular for gas separations due to their abilities to be tailored toward specific applications. Zirconium MOFs in particular are known for their high stability under standard temperature and pressure due to the strength of the Zirconium-Oxygen coordination bond. However, the acid modulator needed to ensure long range order of the product also prevents complete linker deprotonation. This leads to a powder product that cannot easily be incorporated into continuous MOF membranes. This study therefore implemented a new bi-phase synthesis technique with a deprotonating agent to achieve intergrowth in UiO-66 membranes. Crystal intergrowth will allow for effective gas separations and future permeation testing. During experimentation, successful intergrown UiO-66 membranes were synthesized and characterized. The degree of intergrowth and crystal orientations varied with changing deprotonating agent concentration, modulator concentration, and ligand:modulator ratios. Further studies will focus on achieving the same results on porous substrates.
ContributorsClose, Emily Charlotte (Author) / Mu, Bin (Thesis director) / Shan, Bohan (Committee member) / Chemical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2016-12
147875-Thumbnail Image.png
Description

Temperature swing adsorption is a commonly used gas separation technique, and is being<br/>further researched as a method of carbon capture. Carbon capture is becoming increasingly<br/>important as a potential way to slow global warming. In this study, algae-derived activated<br/>carbon adsorbents were analyzed for their carbon dioxide adsorption effectiveness.<br/>Algae-derived carbon adsorbents were

Temperature swing adsorption is a commonly used gas separation technique, and is being<br/>further researched as a method of carbon capture. Carbon capture is becoming increasingly<br/>important as a potential way to slow global warming. In this study, algae-derived activated<br/>carbon adsorbents were analyzed for their carbon dioxide adsorption effectiveness.<br/>Algae-derived carbon adsorbents were synthesized and then studied for their adsorption<br/>isotherms and adsorption breakthrough behavior. From the generated isotherm plots, it was<br/>determined that the carbonization temperature was not high enough and that more batches of<br/>adsorbent would have to be made to more accurately analyze the adsorptive potential of the<br/>algae-derived carbon adsorbent.

ContributorsCiha, Trevor (Author) / Deng, Shuguang (Thesis director) / Taylor, David (Committee member) / Chemical Engineering Program (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
132228-Thumbnail Image.png
Description
Fossil fuels have been the primary source of energy in the world for many decades. However, they are among the top contributors of the greenhouse gas emissions in the atmosphere. The objective of this research was to produce a more environmentally friendly biofuel from Algae-Helix and Salicornia biomasses. Experiments were

Fossil fuels have been the primary source of energy in the world for many decades. However, they are among the top contributors of the greenhouse gas emissions in the atmosphere. The objective of this research was to produce a more environmentally friendly biofuel from Algae-Helix and Salicornia biomasses. Experiments were conducted using a hydrothermal liquefaction (HTL) technique in the HTL reactor to produce biofuel that can potentially replace fossil fuel usage. Hydrothermal Liquefaction is a method used to convert the biomass into the biofuels. HTL experiments on Algae-Helix and Salicornia at 200°C-350°C and 430psi were performed to investigate the effect of temperature on the biocrude yield of the respective biomass used. The effect of the biomass mixture (co-liquefaction) of Salicornia and algae on the amount of biocrude produced was also explored. The biocrude and biochar (by-product) obtained from the hydrothermal liquefaction process were also analyzed using thermogravimetric analyzer (TGA). The maximum biocrude yield for the algae-helix biomass and for the Salicornia biomass were both obtained at 300°C which were 34.63% and 7.65% respectively. The co-liquefaction of the two biomasses by 50:50 provided a maximum yield of 17.26% at 250°C. The co-liquefaction of different ratios explored at 250°C and 300°C concluded that Salicornia to algae-helix ratio of 20:80 produced the highest yields of 22.70% and 31.97%. These results showed that co-liquefaction of biomass if paired well with the optimizing temperature can produce a high biocrude yield. The TGA profiles investigated have shown that salicornia has higher levels of ash content in comparison with the algae-helix. It was then recommended that for a mixture of algae and Salicornia, large-scale biofuel production should be conducted at 250℃ in a 20:80 salicornia to algae biocrude ratio, since it lowers energy needs. The high biochar content left can be recycled to optimize biomass, and prevent wastage.
ContributorsLaideson, Maymary Everrest (Co-author) / Luboowa, Kato (Co-author) / Deng, Shuguang (Thesis director) / Nielsen, David (Committee member) / Chemical Engineering Program (Contributor) / Economics Program in CLAS (Contributor) / Barrett, The Honors College (Contributor)
Created2019-05
132617-Thumbnail Image.png
Description
The microalgae Scenedesmus have been regarded as a potential source for biofuel production, having up to ~30% of dry weight as lipids used for biodiesel fuel production. Electro-selective fermentation (ESF) is a novel approach that can selectively degrade proteins and carbohydrates while conserving lipids within algal cells, while simultaneously

The microalgae Scenedesmus have been regarded as a potential source for biofuel production, having up to ~30% of dry weight as lipids used for biodiesel fuel production. Electro-selective fermentation (ESF) is a novel approach that can selectively degrade proteins and carbohydrates while conserving lipids within algal cells, while simultaneously enhancing lipid wet-extraction and biohydrogenation. ESF is a combination of SF and Microbial Electrolysis Cell (MEC) technologies. Experiments reported here prove that ESF is an effective means of enhancing lipid wet-extraction by ~50% and achieving 36% higher lipid saturation conversion, compared to SF, over 30 days of semi-continuous operation. Anode-respiring bacteria (ARB) residing on the anode surface produced a current that led to increased rate of organic substrate utilization, protein degradation, and ultimately enhanced lipid extraction and biohydrogenation that converted unsaturated to saturated fatty-acids. Thus, ESF provides a promising method for enhancing lipid extraction for biofuel production.
ContributorsRastogi, Neil K (Author) / Rittmann, Bruce (Thesis director) / Liu, Liu (Committee member) / Chemical Engineering Program (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2019-05