Matching Items (1,269)
Filtering by
- All Subjects: Sustainability
- All Subjects: Mechanical Engineering
Description
Additive manufacturing, also known as 3-dimensional (3-d) printing, is now a rapidly growing manufacturing technique. Innovative and complex designs in various aspects of engineering have called for more efficient manufacturing techniques and 3-d printing has been a perfect choice in that direction. This research investigates the use of additive manufacturing in fabricating polymer heat exchangers and estimate their effectiveness as a heat transfer device. Fused Deposition Modeling (FDM), Selective Laser Sintering (SLS) and Stereolithography (SLA) are the three 3-d printing techniques that are explored for their feasibility in manufacturing heat exchangers. The research also explores a triply periodic minimal structure–the gyroid, as a heat exchanger design. The performance of the gyroid heat exchanger was studied using experiments. The main parameters considered for the experiments were heat transfer rate, effectiveness and pressure drop. From the results obtained it can be inferred that using polymers in heat exchangers helps reducing corrosion and fouling problems, but it affects the effectiveness of the heat exchangers. For our design, the maximum effectiveness achieved was 0.1. The pressure drop for the heat exchanger was observed to decrease with an increase in flow rate and the maximum pressure drop measured was 0.88 psi for a flow rate of 5 LPM.
ContributorsDanayat, Swapneel Shailesh (Author) / Phelan, Patrick (Thesis advisor) / Kwon, Beomjin (Committee member) / Azeredo, Bruno (Committee member) / Arizona State University (Publisher)
Created2019
Description
Near-field thermal radiation occurs when the distance between two surfaces at different temperatures is less than the characteristic wavelength of thermal radiation. While theoretical studies predict that the near-field radiative heat transfer could exceed Planck’s blackbody limit in the far-field by orders of magnitudes depending on the materials and gap distance, experimental measurement of super-Planckian near-field radiative heat flux is extremely challenging in particular at sub-100-nm vacuum gaps and few has been demonstrated. The objective of this thesis is to develop a novel thermal metrology based on AFM bi-material cantilever and experimentally measure near-field thermal radiation.
The experiment setup is completed and validated by measuring the near-field radiative heat transfer between a silica microsphere and a silica substrate and comparing with theoretical calculations. The bi-material AFM cantilever made of SiNi and Au bends with temperature changes, whose deflection is monitored by the position-sensitive diode. After careful calibration, the bi-material cantilever works as a thermal sensor, from which the near-field radiative conductance and tip temperature can be deduced when the silica substrate approaches the silica sphere attached to the cantilever by a piezo stage with a resolution of 1 nm from a few micrometers away till physical contact. The developed novel near-field thermal metrology will be used to measure the near-field radiative heat transfer between the silica microsphere and planar SiC surface as well as nanostructured SiC metasurface. This research aims to enhance the fundamental understandings of radiative heat transfer in the near-field which could lead to advances in microelectronics, optical data storage and thermal systems for energy conversion and thermal management.
The experiment setup is completed and validated by measuring the near-field radiative heat transfer between a silica microsphere and a silica substrate and comparing with theoretical calculations. The bi-material AFM cantilever made of SiNi and Au bends with temperature changes, whose deflection is monitored by the position-sensitive diode. After careful calibration, the bi-material cantilever works as a thermal sensor, from which the near-field radiative conductance and tip temperature can be deduced when the silica substrate approaches the silica sphere attached to the cantilever by a piezo stage with a resolution of 1 nm from a few micrometers away till physical contact. The developed novel near-field thermal metrology will be used to measure the near-field radiative heat transfer between the silica microsphere and planar SiC surface as well as nanostructured SiC metasurface. This research aims to enhance the fundamental understandings of radiative heat transfer in the near-field which could lead to advances in microelectronics, optical data storage and thermal systems for energy conversion and thermal management.
ContributorsKondakindi, Ramteja Reddy (Author) / Wang, Liping (Thesis advisor) / Kwon, Beomjin (Committee member) / Wang, Qing Hua (Committee member) / Arizona State University (Publisher)
Created2019
Description
In nature, it is commonly observed that animals and birds perform movement-based thermoregulation activities to regulate their body temperatures. For example, flapping of elephant ears or plumage fluffing in birds. Taking inspiration from nature and to explore the possibilities of such heat transfer enhancements, augmentation of heat transfer rates induced by the vibration of solid and well as novel flexible pinned heatsinks were studied in this research project. Enhancement of natural convection has always been very important in improving the performance of the cooling mechanisms. In this research, flexible heatsinks were developed and they were characterized based on natural convection cooling with moderately vibrating conditions. The vibration of heated surfaces such as motor surfaces, condenser surfaces, robotic arms and exoskeletons led to the motivation of the development of heat sinks having flexible fins with an improved heat transfer capacity. The performance of an inflexible, solid copper pin fin heat sink was considered as the baseline, current industry standard for the thermal performance. It is expected to obtain maximum convective heat transfer at the resonance frequency of the flexible pin fins. Current experimental results with fixed input frequency and varying amplitudes indicate that the vibration provides a moderate improvement in convective heat transfer, however, the flexibility of fins had negligible effects.
ContributorsPrabhu, Saurabh (Author) / Rykaczewski, Konrad (Thesis advisor) / Phelan, Patrick (Committee member) / Wang, Robert (Committee member) / Arizona State University (Publisher)
Created2019
Description
Non-Destructive Testing (NDT) is a branch of scientific methods and techniques
used to evaluate the defects and irregularities in engineering materials. These methods
conduct testing without destroying or altering material’s structure and functionality. Most
of these defects are subsurface making them difficult to detect and access.
SONIC INFRARED (IR) is a relatively new and emerging vibrothermography
method under the category of NDT methods. This is a fast NDT inspection method that
uses an ultrasonic generator to pass an ultrasonic pulse through the test specimen which
results in a temperature variation in the test specimen. The temperature increase around
the area of the defect is more because of frictional heating due to the vibration of the
specimen. This temperature variation can be observed using a thermal camera.
In this research study, the temperature variation in the composite laminate during
the SONIC IR experimentation using an infrared thermal camera. These recorded data are
used to determine the location, dimension and depth of defects through SONIC IR NDT
method using existing defect detection algorithms. Probability of detection analysis is
used to determine the probability of detection under specific experimental conditions for
two different types of composite laminates. Lastly, the effect of the process parameters
such as number of pulses, pulse duration and time delay between pulses of this technique
on the detectability and probability of detection is studied in detail.
used to evaluate the defects and irregularities in engineering materials. These methods
conduct testing without destroying or altering material’s structure and functionality. Most
of these defects are subsurface making them difficult to detect and access.
SONIC INFRARED (IR) is a relatively new and emerging vibrothermography
method under the category of NDT methods. This is a fast NDT inspection method that
uses an ultrasonic generator to pass an ultrasonic pulse through the test specimen which
results in a temperature variation in the test specimen. The temperature increase around
the area of the defect is more because of frictional heating due to the vibration of the
specimen. This temperature variation can be observed using a thermal camera.
In this research study, the temperature variation in the composite laminate during
the SONIC IR experimentation using an infrared thermal camera. These recorded data are
used to determine the location, dimension and depth of defects through SONIC IR NDT
method using existing defect detection algorithms. Probability of detection analysis is
used to determine the probability of detection under specific experimental conditions for
two different types of composite laminates. Lastly, the effect of the process parameters
such as number of pulses, pulse duration and time delay between pulses of this technique
on the detectability and probability of detection is studied in detail.
ContributorsDarnal, Aryabhat (Author) / Liu, Yongming (Thesis advisor) / Zhuang, Houlong (Committee member) / Nian, Qiong (Committee member) / Arizona State University (Publisher)
Created2019
Description
Solar energy has become one of the most popular renewable energy in human’s life because of its abundance and environment friendliness. To achieve high solar energy conversion efficiency, it usually requires surfaces to absorb selectivity within one spectral range of interest and reflect strongly over the rest of the spectrum. An economic method is always desired to fabricate spectrally selective surfaces with improved energy conversion efficiency. Colloidal lithography is a recently emerged way of nanofabrication, which has advantages of low-cost and easy operation.
In this thesis, aluminum metasurface structures are proposed based on colloidal lithography method. High Frequency Structure Simulator is used to numerically study optical properties and design the aluminum metasurfaces with selective absorption. Simulation results show that proposed aluminum metasurface structure on aluminum oxide thin film and aluminum substrate has a major reflectance dip, whose wavelength is tunable within the near-infrared and visible spectrum with metasurface size. As the metasurface is opaque due to aluminum film, it indicates strong wavelength-selective optical absorption, which is due to the magnetic resonance between the top metasurface and bottom Al film within the aluminum oxide layer.
The proposed sample is fabricated based on colloidal lithography method. Monolayer polystyrene particles of 500 nm are successfully prepared and transferred onto silicon substrate. Scanning electron microscope is used to check the surface topography. Aluminum thin film with 20-nm or 50-nm thickness is then deposited on the sample. After monolayer particles are removed, optical properties of samples are measured by micro-scale optical reflectance and transmittance microscope. Measured and simulated reflectance of these samples do not have frequency selective properties and is not sensitive to defects. The next step is to fabricate the Al metasurface on Al_2 O_3 and Al films to experimentally demonstrate the selective absorption predicted from the numerical simulation.
In this thesis, aluminum metasurface structures are proposed based on colloidal lithography method. High Frequency Structure Simulator is used to numerically study optical properties and design the aluminum metasurfaces with selective absorption. Simulation results show that proposed aluminum metasurface structure on aluminum oxide thin film and aluminum substrate has a major reflectance dip, whose wavelength is tunable within the near-infrared and visible spectrum with metasurface size. As the metasurface is opaque due to aluminum film, it indicates strong wavelength-selective optical absorption, which is due to the magnetic resonance between the top metasurface and bottom Al film within the aluminum oxide layer.
The proposed sample is fabricated based on colloidal lithography method. Monolayer polystyrene particles of 500 nm are successfully prepared and transferred onto silicon substrate. Scanning electron microscope is used to check the surface topography. Aluminum thin film with 20-nm or 50-nm thickness is then deposited on the sample. After monolayer particles are removed, optical properties of samples are measured by micro-scale optical reflectance and transmittance microscope. Measured and simulated reflectance of these samples do not have frequency selective properties and is not sensitive to defects. The next step is to fabricate the Al metasurface on Al_2 O_3 and Al films to experimentally demonstrate the selective absorption predicted from the numerical simulation.
ContributorsGuan, Chuyun (Author) / Wang, Liping (Thesis advisor) / Azeredo, Bruno (Committee member) / Wang, Robert (Committee member) / Arizona State University (Publisher)
Created2019
Description
This dissertation advances the capability of water infrastructure utilities to anticipate and adapt to vulnerabilities in their systems from temperature increase and interdependencies with other infrastructure systems. Impact assessment models of increased heat and interdependencies were developed which incorporate probability, spatial, temporal, and operational information. Key findings from the models are that with increased heat the increased likelihood of water quality non-compliances is particularly concerning, the anticipated increases in different hardware components generate different levels of concern starting with iron pipes, then pumps, and then PVC pipes, the effects of temperature increase on hardware components and on service losses are non-linear due to spatial criticality of components, and that modeling spatial and operational complexity helps to identify potential pathways of failure propagation between infrastructure systems. Exploring different parameters of the models allowed for comparison of institutional strategies. Key findings are that either preventative maintenance or repair strategies can completely offset additional outages from increased temperatures though-- improved repair times reduce overall duration of outages more than preventative maintenance, and that coordinated strategies across utilities could be effective for mitigating vulnerability.
ContributorsBondank, Emily (Author) / Chester, Mikhail V (Thesis advisor) / Ruddell, Benjamin L (Committee member) / Johnson, Nathan G (Committee member) / Seager, Thomas P (Committee member) / Arizona State University (Publisher)
Created2019
Description
With the advancements in technology, it is now possible to synthesize new materials with specific microstructures, and enhanced mechanical and physical properties. One of the new class of materials are nanoscale metallic multilayers, often referred to as nanolaminates. Nanolaminates are composed of alternating, nanometer-thick layers of multiple materials (typically metals or ceramics), and exhibit very high strength, wear resistance and radiation tolerance. This thesis is focused on the fabrication and mechanical characterization of nanolaminates composed of Copper and Cobalt, two metals which are nearly immiscible across the entire composition range. The synthesis of these Cu-Co nanolaminates is performed using sputtering, a well-known and technologically relevant physical vapor deposition process. X-ray diffraction is used to characterize the microstructure of the nanolaminates. Cu-Co nanolaminates with different layer thicknesses are tested using microelectromechanical systems (MEMS) based tensile testing devices fabricated using photolithography and etching processes. The stress-strain behavior of nanolaminates with varying layer thicknesses are analysed and correlated to their microstructure.
ContributorsRajarajan, Santhosh Kiran (Author) / Rajagopalan, Jagannathan (Thesis advisor) / Oswald, Jay (Committee member) / Solanki, Kiran (Committee member) / Arizona State University (Publisher)
Created2019
Description
In many social-ecological systems, shared resources play a critical role in supporting the livelihoods of rural populations. Physical infrastructure enables resource access and reduces the variability of resource supply. In order for the infrastructure to remain functional, institutions must incentivize individuals to engage in provision and maintenance. The objective of my dissertation is to understand key formal and informal institutions that affect provision of shared infrastructure and the policy tools that may improve infrastructure provision. I examine these questions in the context of irrigation systems in India because infrastructure maintenance is a persistent challenge and system function is critical for global food production.
My first study investigates how the presence of private infrastructure, such as groundwater pumps, affects the provision of shared infrastructure, such as shared tanks or surface reservoirs. I examine whether formal institutions, such as water pricing instruments, may prevent under-provision of the shared tanks. My findings suggest that in the absence of rules that coordinate tank maintenance, the presence of private pumps will have a detrimental effect on system productivity and equality. On the other hand, the combination of a fixed groundwater fee and a location-based maintenance fee for tank users can improve system productivity and equality.
The second study examines the effect of power asymmetries between farmers, caused by informal institutions such as caste, on the persistence of political institutions that govern infrastructure provision. I examined the effect of policy tools, such as non-farm wage employment and informational interventions, on the persistence of two types of political institutions: self-governed and nested. Results suggest that critical regime shifts in political institutions can be generated by either intervening in formal institutions, such as non-farm wage employment, or informal institutions, such as knowledge transmission or learning mechanisms.
The third study investigates how bureaucratic and political corruption affect public good provision. I examine how institutional and environmental factors affect the likelihood of corruption and infrastructure provision. I demonstrate that cracking down on corruption is only beneficial when infrastructure provision is poor. I also show that bureaucratic wages play an important role in curbing extralegal transactions and improving infrastructure provision.
My first study investigates how the presence of private infrastructure, such as groundwater pumps, affects the provision of shared infrastructure, such as shared tanks or surface reservoirs. I examine whether formal institutions, such as water pricing instruments, may prevent under-provision of the shared tanks. My findings suggest that in the absence of rules that coordinate tank maintenance, the presence of private pumps will have a detrimental effect on system productivity and equality. On the other hand, the combination of a fixed groundwater fee and a location-based maintenance fee for tank users can improve system productivity and equality.
The second study examines the effect of power asymmetries between farmers, caused by informal institutions such as caste, on the persistence of political institutions that govern infrastructure provision. I examined the effect of policy tools, such as non-farm wage employment and informational interventions, on the persistence of two types of political institutions: self-governed and nested. Results suggest that critical regime shifts in political institutions can be generated by either intervening in formal institutions, such as non-farm wage employment, or informal institutions, such as knowledge transmission or learning mechanisms.
The third study investigates how bureaucratic and political corruption affect public good provision. I examine how institutional and environmental factors affect the likelihood of corruption and infrastructure provision. I demonstrate that cracking down on corruption is only beneficial when infrastructure provision is poor. I also show that bureaucratic wages play an important role in curbing extralegal transactions and improving infrastructure provision.
ContributorsVallury, Sechindra (Author) / Abbott, Joshua K (Thesis advisor) / Anderies, John M (Thesis advisor) / Leonard, Bryan (Committee member) / Arizona State University (Publisher)
Created2019
Description
Stress-related failure such as cracking are an important photovoltaic (PV) reliability issue since it accounts for a high percentage of power losses in the midlife-failure and wear-out failure regimes. Cell cracking can only be correlated with module degradation when cracks are of detectable size and detrimental to the performance. Several techniques have been explored to access the deflection and stress status on solar cell, but they have disadvantages such as high surface sensitivity.
This dissertation presents a new and non-destructive method for mapping the deflection on encapsulated solar cells using X-ray topography (XRT). This method is based on Bragg diffraction imaging, where only the areas that meet diffraction conditions will present contrast. By taking XRT images of the solar cell at various sample positions and applying an in-house developed algorithm framework, the cell‘s deflection map is obtained. Error analysis has demonstrated that the errors from the experiment and the data processing are below 4.4 and 3.3%.
Von Karman plate theory has been applied to access the stress state of the solar cells. Under the assumptions that the samples experience pure bending and plain stress conditions, the principal stresses are obtained from the cell deflection data. Results from a statistical analysis using a Weibull distribution suggest that 0.1% of the data points can contribute to critical failure. Both the soldering and lamination processes put large amounts of stress on solar cells. Even though glass/glass packaging symmetry is preferred over glass/backsheet, the solar cells inside the glass/glass packaging experience significantly more stress. Through a series of in-situ four-point bending test, the assumptions behind Von Karman theory are validated for cases where the neutral plane is displaced by the tensile and compressive stresses.
The deflection and stress mapping method is applied to two next generation PV concepts named Flex-circuit and PVMirror. The Flex-circuit module concept replaces traditional metal ribbons with Al foils for electrical contact and PVMirror concept utilizes a curved PV module design with a dichroic film for thermal storage and electrical output. The XRT framework proposed in this dissertation successfully characterized the impact of various novel interconnection and packaging solutions.
This dissertation presents a new and non-destructive method for mapping the deflection on encapsulated solar cells using X-ray topography (XRT). This method is based on Bragg diffraction imaging, where only the areas that meet diffraction conditions will present contrast. By taking XRT images of the solar cell at various sample positions and applying an in-house developed algorithm framework, the cell‘s deflection map is obtained. Error analysis has demonstrated that the errors from the experiment and the data processing are below 4.4 and 3.3%.
Von Karman plate theory has been applied to access the stress state of the solar cells. Under the assumptions that the samples experience pure bending and plain stress conditions, the principal stresses are obtained from the cell deflection data. Results from a statistical analysis using a Weibull distribution suggest that 0.1% of the data points can contribute to critical failure. Both the soldering and lamination processes put large amounts of stress on solar cells. Even though glass/glass packaging symmetry is preferred over glass/backsheet, the solar cells inside the glass/glass packaging experience significantly more stress. Through a series of in-situ four-point bending test, the assumptions behind Von Karman theory are validated for cases where the neutral plane is displaced by the tensile and compressive stresses.
The deflection and stress mapping method is applied to two next generation PV concepts named Flex-circuit and PVMirror. The Flex-circuit module concept replaces traditional metal ribbons with Al foils for electrical contact and PVMirror concept utilizes a curved PV module design with a dichroic film for thermal storage and electrical output. The XRT framework proposed in this dissertation successfully characterized the impact of various novel interconnection and packaging solutions.
ContributorsMeng, Xiaodong (Author) / Bertoni, Marian I (Thesis advisor) / Meier, Rico (Committee member) / Holman, Zachary C (Committee member) / Alford, Terry (Committee member) / Arizona State University (Publisher)
Created2019
Description
This dissertation seeks to understand and study the process of attention harvesting and knowledge production on typical online Q&A communities. Goals of this study include quantifying the attention harvesting and online knowledge, damping the effect of competition for attention on knowledge production, and examining the diversity of user behaviors on question answering. Project 1 starts with a simplistic discrete time model on a scale-free network and provides the method to measure the attention harvested. Further, project 1 highlights the effect of distractions on harvesting productive attention and in the end concludes which factors are influential and sensitive to the attention harvesting. The main finding is the critical condition to optimize the attention harvesting on the network by reducing network connection. Project 2 extends the scope of the study to quantify the value and quality of knowledge, focusing on the question answering dynamics. This part of research models how attention was distributed under typical answering strategies on a virtual online Q&A community. The final result provides an approach to measure the efficiency of attention transferred into value production and observes the contribution of different scenarios under various computed metrics. Project 3 is an advanced study on the foundation of the virtual question answering community from project 2. With highlights of different user behavioral preferences, algorithm stochastically simulates individual decisions and behavior. Results from sensitivity analysis on different mixtures of user groups gives insight of nonlinear dynamics for the objectives of success. Simulation finding shows reputation rewarding mechanism on Stack Overflow shapes the crowd mixture of behavior to be successful. In addition, project proposed an attention allocation scenario of question answering to improve the success metrics when coupling with a particular selection strategy.
ContributorsYu, Fan, Ph.D (Author) / Janssen, Marcus A (Thesis advisor) / Kang, Yun (Committee member) / Castillo-Chavez, Carlos (Committee member) / Arizona State University (Publisher)
Created2019