Matching Items (1,193)
Filtering by
- All Subjects: Materials Science
- All Subjects: Nutrition
- All Subjects: Marketing
- Member of: Theses and Dissertations
Description
Metal hydride materials have been intensively studied for hydrogen storage applications. In addition to potential hydrogen economy applications, metal hydrides offer a wide variety of other interesting properties. For example, hydrogen-dominant materials, which are hydrides with the highest hydrogen content for a particular metal/semimetal composition, are predicted to display high-temperature superconductivity. On the other side of the spectrum are hydrides with small amounts of hydrogen (0.1 - 1 at.%) that are investigated as viable magnetic, thermoelectric or semiconducting materials. Research of metal hydride materials is generally important to gain fundamental understanding of metal-hydrogen interactions in materials. Hydrogenation of Zintl phases, which are defined as compounds between an active metal (alkali, alkaline earth, rare earth) and a p-block metal/semimetal, were attempted by a hot sintering method utilizing an autoclave loaded with gaseous hydrogen (< 9 MPa). Hydride formation competes with oxidative decomposition of a Zintl phase. The oxidative decomposition, which leads to a mixture of binary active metal hydride and p-block element, was observed for investigated aluminum (Al) and gallium (Ga) containing Zintl phases. However, a new phase Li2Al was discovered when Zintl phase precursors were synthesized. Using the single crystal x-ray diffraction (SCXRD), the Li2Al was found to crystallize in an orthorhombic unit cell (Cmcm) with the lattice parameters a = 4.6404(8) Å, b = 9.719(2) Å, and c = 4.4764(8) Å. Increased demand for materials with improved properties necessitates the exploration of alternative synthesis methods. Conventional metal hydride synthesis methods, like ball-milling and autoclave technique, are not responding to the demands of finding new materials. A viable alternative synthesis method is the application of high pressure for the preparation of hydrogen-dominant materials. Extreme pressures in the gigapascal ranges can open access to new metal hydrides with novel structures and properties, because of the drastically increased chemical potential of hydrogen. Pressures up to 10 GPa can be easily achieved using the multi-anvil (MA) hydrogenations while maintaining sufficient sample volume for structure and property characterization. Gigapascal MA hydrogenations using ammonia borane (BH3NH3) as an internal hydrogen source were employed in the search for new hydrogen-dominant materials. Ammonia borane has high gravimetric volume of hydrogen, and additionally the thermally activated decomposition at high pressures lead to a complete hydrogen release at reasonably low temperature. These properties make ammonia borane a desired hydrogen source material. The missing member Li2PtH6 of the series of A2PtH6 compounds (A = Na to Cs) was accessed by employing MA technique. As the known heavier analogs, the Li2PtH6 also crystallizes in a cubic K2PtCl6-type structure with a cell edge length of 6.7681(3) Å. Further gigapascal hydrogenations afforded the compounds K2SiH6 and Rb2SiH6 which are isostructural to Li2PtH6. The cubic K2SiH6 and Rb2SiH6 are built from unique hypervalent SiH62- entities with the lattice parameters of 7.8425(9) and 8.1572(4) Å, respectively. Spectroscopic analysis of hexasilicides confirmed the presence of hypervalent bonding. The Si-H stretching frequencies at 1550 cm-1 appeared considerably decreased in comparison with a normal-valent (2e2c) Si-H stretching frequencies in SiH4 at around 2200 cm-1. However, the observed stretching modes in hypervalent hexasilicides were in a reasonable agreement with Ph3SiH2- (1520 cm-1) where the hydrogen has the axial (3e4c bonded) position in the trigoal bipyramidal environment.
ContributorsPuhakainen, Kati (Author) / Häussermann, Ulrich (Thesis advisor) / Seo, Dong (Thesis advisor) / Kouvetakis, John (Committee member) / Wolf, George (Committee member) / Arizona State University (Publisher)
Created2013
Description
Scholars have written much about home and meaning, yet they have said little about the professionally furnished model home viewed as a cultural artifact. Nor is there literature addressing how the home building industry uses these spaces to promote images of family life to increase sales. This research notes that not only do the structure, design, and layout of the model home formulate cultural identity but also the furnishings and materials within. Together, the model home and carefully selected artifacts placed therein help to express specific chosen lifestyles as that the home builder determines. This thesis considers the model home as constructed as well as builder's publications, descriptions, and advertisements. The research recognizes the many facets of merchandising, consumerism, and commercialism influencing the design and architecture of the suburban home. Historians of visual and cultural studies often investigate these issues as separate components. By contrast, this thesis offers an integrated framework of inquiry, drawing upon such disciplines as cultural history, anthropology, and material culture. The research methodology employs two forms of content analysis - image and text. The study analyzes 36 model homes built in Phoenix, Arizona, during the period 1955-1956. The thesis explores how the builder sends a message, i.e. images, ideals, and aspirations, to the potential home buyer through the design and decoration of the model home. It then speculates how the home buyer responds to those messages. The symbiotic relationship between the sender and receiver, together, tells a story about the Phoenix lifestyle and the domestic ideals of the 1950s. Builders sent messages surrounding convenience, spaciousness, added luxury, and indoor-outdoor living to a growing and discriminating home buying market.
ContributorsGolab, Coreen R (Author) / Brandt, Beverly K. (Thesis advisor) / Bernardi, Jose (Committee member) / Schleif, Corine (Committee member) / Arizona State University (Publisher)
Created2013
Description
Topological insulators with conducting surface states yet insulating bulk states have generated a lot of interest amongst the physics community due to their varied characteristics and possible applications. Doped topological insulators have presented newer physical states of matter where topological order co&ndashexists; with other physical properties (like magnetic order). The electronic states of these materials are very intriguing and pose problems and the possible solutions to understanding their unique behaviors. In this work, we use Electron Energy Loss Spectroscopy (EELS) – an analytical TEM tool to study both core&ndashlevel; and valence&ndashlevel; excitations in Bi2Se3 and Cu(doped)Bi2Se3 topological insulators. We use this technique to retrieve information on the valence, bonding nature, co-ordination and lattice site occupancy of the undoped and the doped systems. Using the reference materials Cu(I)Se and Cu(II)Se we try to compare and understand the nature of doping that copper assumes in the lattice. And lastly we utilize the state of the art monochromated Nion UltraSTEM 100 to study electronic/vibrational excitations at a record energy resolution from sub-nm regions in the sample.
ContributorsSubramanian, Ganesh (Author) / Spence, John (Thesis advisor) / Jiang, Nan (Committee member) / Chen, Tingyong (Committee member) / Chan, Candace (Committee member) / Arizona State University (Publisher)
Created2013
Description
Objectives: Although childhood obesity has received growing attention, parents still fail to recognize overweight and obesity in their children. Accurate identification of overweight or obesity in their child is associated with the parent's responsiveness to interventions aimed at preventing weight-related health issues. Recent research shows that a child's age and gender are associated with parental misperception of their child's weight status, but little is known about the interaction of these factors across various age groups. This study examined the association between a wide range of parent, child, and household factors and the accuracy of parental perception of their child's body weight status compared to parent-measured body weight status. Methods: Data were collected from a random-digit-dial telephone survey of 1708 households located in five low-income New Jersey cities with large minority populations. A subset of 548 children whose parents completed the survey and returned a worksheet of parent-measured heights and weights were the focus of the analysis. Bivariate and multivariate analyses were performed to determine the factors significantly associated with parental perception of their child's body weight status. Results: Based on parent-measure heights and weights, 36% of the children were overweight or obese (OWOB). Only 21% of OWOB children were perceived by their parents as OWOB. Child gender, child body mass index (BMI) and parent BMI were significant independent predictors of parents' accuracy at perceiving their child's body weight status. Conclusion: Boys, OWOB children, and children of OWOB parents had significantly greater odds of parental underestimation of their body weight status. Parents had better recognition of OWOB in their daughters, especially older daughters, than in their sons, suggesting parental gender bias in identifying OWOB in children. Further research is needed regarding parental gender bias and its implications in OWOB identification in children.
ContributorsBader, Wendy (Author) / Ohri-Vachaspati, Punam (Thesis advisor) / Lloyd, Kristen (Committee member) / Crespo, Noe (Committee member) / Arizona State University (Publisher)
Created2013
Description
Objectives Through a cross-sectional observational study, this thesis evaluates the relationship between food insecurity and weight status, eating behaviors, the home food environment, meal planning and preparation, and perceived stress as it relates to predominantly Hispanic/Latino parents in Phoenix, Arizona. The purpose of this study was to address gaps in the literature by examining differences in "healthy" and "unhealthy" eating behaviors, foods available in the home, how time and low energy impact meal preparation, and the level of stress between food security groups. Methods Parents, 18 years or older, were recruited during two pre-scheduled health fairs, from English as a second language classes, or from the Women, Infants, and Children's clinic at a local community center, Golden Gate Community Center, in Phoenix, Arizona. An interview, electronic, or paper survey were offered in either Spanish or English to collect data on the variables described above. In addition to the survey, height and weight were collected for all participants to determine BMI and weight status. One hundred and sixty participants were recruited. Multivariate linear and logistic regression models, adjusting for weight status, education, race/ethnicity, income level, and years residing in the U.S., were used to assess the relationship between food security status and weight status, eating behaviors, the home food environment, meal planning and preparation, and perceived stress. Results Results concluded that food insecurity was more prevalent among parents reporting lower income levels compared to higher income levels (p=0.017). In adjusted models, higher perceived cost of fruits (p=0.004) and higher perceived level of stress (p=0.001) were associated with food insecurity. Given that the sample population was predominately women, a post-hoc analysis was completed on women only. In addition to the two significant results noted in the adjusted analyses, the women-only analysis revealed that food insecure mothers reported lower amounts of vegetables served with meals (p=0.019) and higher use of fast-food when tired or running late (p=0.043), compared to food secure mothers. Conclusion Additional studies are needed to further assess differences in stress levels between food insecure parents and food insecure parents, with special consideration for directionality and its relationship to weight status.
ContributorsVillanova, Christina (Author) / Bruening, Meg (Thesis advisor) / Ohri-Vachaspati, Punam (Committee member) / Vega-Lopez, Sonia (Committee member) / Arizona State University (Publisher)
Created2014
Description
Fruit and vegetable (FV) consumption continues to lag far behind US Department of Agriculture (USDA) recommendations. Interventions targeting individuals' dietary behaviors address only a small fraction of dietary influences. Changing the food environment by increasing availability of and excitement for FV through local food production has shown promise as a method for enhancing intake. However, the extent to which local production is sufficient to meet recommended FV intakes, or actual intakes, of specific populations remains largely unconsidered. This study was the first of its kind to evaluate the capacity to support FV intake of Arizona's population with statewide production of FV. We created a model to evaluate what percentage of Dietary Guidelines for Americans (DGA) recommendations, as well as actual consumption, state-level FV production could meet in a given year. Intake and production figures were amended to include estimates of only fresh, non-tropical FV. Production was then estimated by month and season to illustrate fluctuations in availability of FV. Based on our algorithm, Arizona production met 184.5% of aggregate fresh vegetable recommendations, as well as 351.9% of estimated intakes of Arizonans, but met only 29.7% of recommended and 47.8% of estimated intake of fresh, non-tropical fruit. Much of the excess vegetable production can be attributed to the dark-green vegetable sub-group category, which could meet 3204.6% and 3160% of Arizonans' aggregated recommendations and estimated intakes, respectively. Only minimal seasonal variations in the total fruit and total vegetable categories were found, but production of the five vegetable sub-groups varied between the warm and cool seasons by 19-98%. For example, in the starchy vegetable group, cool season (October to March) production met only 3.6% of recommendations, but warm season (April to November) production supplied 196.5% of recommendations. Results indicate that Arizona agricultural production has the capacity to meet a large proportion of the population's FV needs throughout much of the year, while at the same time remaining a major producer of dark-green vegetables for out-of-state markets.
ContributorsVaudrin, Nicole (Author) / Wharton, Christopher (Christopher Mack), 1977- (Thesis advisor) / Bruening, Meg (Thesis advisor) / Ohri-Vachaspati, Punam (Committee member) / Villalobos, J. Rene (Committee member) / Arizona State University (Publisher)
Created2013
Description
Consumers search before making virtually any purchase. The notion that consumers engage in costly search is well-understood to have deep implications for market performance. However to date, no theoretical model allows for the observation that consumers often purchase more than a single product in an individual shopping occasion. Clothing, food, books, and music are but four important examples of goods that are purchased many items at a time. I develop a modeling approach that accounts for multi-purchase occasions in a structural way. My model shows that as preference for variety increases, so does the size of the consideration set. Search models that ignore preference for variety are, therefore, likely to under-predict the number of products searched. It is generally thought that lower search costs increase retail competition which pushes prices and assortments down. However, I show that there is an optimal number of products to offer depending on the intensity of consumer search costs. Consumers with high search costs prefer to shop at a store with a large assortment of goods and purchase multiple products, even if the prices that firm charges is higher than competing firms' prices. On the other hand, consumers with low search costs tend to purchase fewer goods and shop at the stores that have lower prices, as long as the store has a reasonable assortment offering. The implications for market performance are dramatic and pervasive. In particular, the misspecification of demand model in which search is important and/or multiple discreteness is observed will produce biased parameter estimates leading to erroneous managerial conclusions.
ContributorsAllender, William Jacob (Author) / Richards, Timothy J. (Thesis advisor) / Park, Sungho (Committee member) / Hamilton, Stephen (Committee member) / Arizona State University (Publisher)
Created2013
Description
I compare the effect of anonymous social network ratings (Yelp.com) and peer group recommendations on restaurant demand. I conduct a two-stage choice experiment in which restaurant visits in the first stage are informed by online social network reviews from Yelp.com, and visits in the second stage by peer network reviews. I find that anonymous reviewers have a stronger effect on restaurant preference than peers. I also compare the power of negative reviews with that of positive reviews. I found that negative reviews are more powerful compared to the positive reviews on restaurant preference. More generally, I find that in an environment of high attribute uncertainty, information gained from anonymous experts through social media is likely to be more influential than information obtained from peers.
ContributorsTiwari, Ashutosh (Author) / Richards, Timothy J. (Thesis advisor) / Qiu, Yueming (Committee member) / Grebitus, Carola (Committee member) / Arizona State University (Publisher)
Created2013
Description
The alkali activation of aluminosilicate materials as binder systems derived from industrial byproducts have been extensively studied due to the advantages they offer in terms enhanced material properties, while increasing sustainability by the reuse of industrial waste and byproducts and reducing the adverse impacts of OPC production. Fly ash and ground granulated blast furnace slag are commonly used for their content of soluble silica and aluminate species that can undergo dissolution, polymerization with the alkali, condensation on particle surfaces and solidification. The following topics are the focus of this thesis: (i) the use of microwave assisted thermal processing, in addition to heat-curing as a means of alkali activation and (ii) the relative effects of alkali cations (K or Na) in the activator (powder activators) on the mechanical properties and chemical structure of these systems. Unsuitable curing conditions instigate carbonation, which in turn lowers the pH of the system causing significant reductions in the rate of fly ash activation and mechanical strength development. This study explores the effects of sealing the samples during the curing process, which effectively traps the free water in the system, and allows for increased aluminosilicate activation. The use of microwave-curing in lieu of thermal-curing is also studied in order to reduce energy consumption and for its ability to provide fast volumetric heating. Potassium-based powder activators dry blended into the slag binder system is shown to be effective in obtaining very high compressive strengths under moist curing conditions (greater than 70 MPa), whereas sodium-based powder activation is much weaker (around 25 MPa). Compressive strength decreases when fly ash is introduced into the system. Isothermal calorimetry is used to evaluate the early hydration process, and to understand the reaction kinetics of the alkali powder activated systems. A qualitative evidence of the alkali-hydroxide concentration of the paste pore solution through the use of electrical conductivity measurements is also presented, with the results indicating the ion concentration of alkali is more prevalent in the pore solution of potassium-based systems. The use of advanced spectroscopic and thermal analysis techniques to distinguish the influence of studied parameters is also discussed.
ContributorsChowdhury, Ussala (Author) / Neithalath, Narayanan (Thesis advisor) / Rajan, Subramanium D. (Committee member) / Mobasher, Barzin (Committee member) / Arizona State University (Publisher)
Created2013
Description
In recent years, overall consumption of meat products has been decreasing, and at the same time vegetarianism is on the rise. A variety of factors are likely driving changes in consumers' attitudes towards, and consumption of, meat products. Although concern regarding animal welfare may contribute to these trends, growing consumer interest in the roles that production and processing of meat play in terms of environmental degradation could also impact individuals' decisions about the inclusion of meat in their diets. Because these factors could be related to moral attitudes as well, the purpose of this study was to explore the relations among meat consumption, general environmental attitudes, and moral `foundations' of decision-making, including concern about minimizing `harm' and maximizing `care,' as well as issues of `purity' and `sanctity.' A survey was conducted among current college students using the New Ecological Paradigm scale and the Moral Foundations Questionnaire to assess environmental and moral attitudes. A food frequency questionnaire was used to assess meat consumption. Multiple linear regression analyses explored the relations of environmental and moral attitudes with meat consumption, controlling for potential confounding variables. The results showed no significant correlations among meat consumption, environmental attitudes or moral foundations of harm/care and purity/sanctity.
ContributorsSpringer, LeeAnn (Author) / Wharton, Christopher (Christopher Mack), 1977- (Thesis advisor) / Hekler, Eric (Thesis advisor) / Ohri-Vachaspati, Punam (Committee member) / Hall, Rick (Committee member) / Arizona State University (Publisher)
Created2013