Matching Items (3)
Filtering by

Clear all filters

153123-Thumbnail Image.png
Description
Stereolithography files (STL) are widely used in diverse fields as a means of describing complex geometries through surface triangulations. The resulting stereolithography output is a result of either experimental measurements, or computer-aided design. Often times stereolithography outputs from experimental means are prone to noise, surface irregularities and holes in an

Stereolithography files (STL) are widely used in diverse fields as a means of describing complex geometries through surface triangulations. The resulting stereolithography output is a result of either experimental measurements, or computer-aided design. Often times stereolithography outputs from experimental means are prone to noise, surface irregularities and holes in an otherwise closed surface.

A general method for denoising and adaptively smoothing these dirty stereolithography files is proposed. Unlike existing means, this approach aims to smoothen the dirty surface representation by utilizing the well established levelset method. The level of smoothing and denoising can be set depending on a per-requirement basis by means of input parameters. Once the surface representation is smoothened as desired, it can be extracted as a standard levelset scalar isosurface.

The approach presented in this thesis is also coupled to a fully unstructured Cartesian mesh generation library with built-in localized adaptive mesh refinement (AMR) capabilities, thereby ensuring lower computational cost while also providing sufficient resolution. Future work will focus on implementing tetrahedral cuts to the base hexahedral mesh structure in order to extract a fully unstructured hexahedra-dominant mesh describing the STL geometry, which can be used for fluid flow simulations.
ContributorsKannan, Karthik (Author) / Herrmann, Marcus (Thesis advisor) / Peet, Yulia (Committee member) / Frakes, David (Committee member) / Arizona State University (Publisher)
Created2014
158776-Thumbnail Image.png
Description
Traditionally, for applications that require heat transfer (e.g. heat exchangers),metals have been the go-to material for manufacturers because of their high thermal as
well as structural properties. However, metals have some notable drawbacks. They are
not corrosion-resistant, offer no freedom of design, have a high cost of production, and
sourcing the material itself.

Traditionally, for applications that require heat transfer (e.g. heat exchangers),metals have been the go-to material for manufacturers because of their high thermal as
well as structural properties. However, metals have some notable drawbacks. They are
not corrosion-resistant, offer no freedom of design, have a high cost of production, and
sourcing the material itself. Even though polymers on their own don’t show great
prospects in the field of thermal applications, their composites perform better than their
counterparts. Nanofillers, when added to a polymer matrix not only increase their
structural strength but also their thermal performance. This work aims to tackle two of
those problems by using the additive manufacturing method, stereolithography to solve
the problem of design freedom, and the use of polymer nanocomposite material for
corrosion-resistance and increase their overall thermal performance. In this work, three
different concentrations of polymer composite materials were studied: 0.25 wt%, 0.5
wt%, and 1wt% for their thermal conductivity. The samples were prepared by
magnetically stirring them for a period of 10 to 24 hours depending on their
concentrations and then sonicating in an ice bath further for a period of 2 to 3 hours.
These samples were then tested for their thermal conductivities using a Hot Disk TPS
2500S. Scanning Electron Microscope (SEM) to study the dispersion of the nanoparticles
in the matrix. Different theoretical models were studied and used to compare
experimental data to the predicted values of effective thermal conductivity. An increase
of 7.9 % in thermal conductivity of the composite material was recorded for just 1 wt%
addition of multiwalled carbon nanotubes (MWCNTs).
ContributorsGide, Kunal Manoj (Author) / Nian, Qiong (Thesis advisor) / Kwon, Beomjin (Committee member) / Li, Xiangjia (Committee member) / Arizona State University (Publisher)
Created2020
158377-Thumbnail Image.png
Description
In this study, the stereolithography (SLA) 3D printing method is used to manufacture honeycomb-shaped flat sorbents that can capture CO2 from the air. The 3D-printed sorbents were synthesized using polyvinyl alcohol (PVA), propylene glycol, photopolymer resin, and an ion exchange resin (IER). The one-factor-at-a-time (OFAT) design-of-experiment approach was employed to

In this study, the stereolithography (SLA) 3D printing method is used to manufacture honeycomb-shaped flat sorbents that can capture CO2 from the air. The 3D-printed sorbents were synthesized using polyvinyl alcohol (PVA), propylene glycol, photopolymer resin, and an ion exchange resin (IER). The one-factor-at-a-time (OFAT) design-of-experiment approach was employed to determine the best combination ratio of materials to achieve high moisture swing and a good turnout of printed sorbents. The maximum load limit of the liquid photopolymer resin to enable printability of sorbents was found to be 44%. A series of moisture swing experiments was conducted to investigate the adsorption and desorption performance of the 3D-printed sorbents and compare them with the performance of IER samples prepared by a conventional approach. Results from these experiments conducted indicate that the printed sorbents showed less CO2 adsorptive characteristics compared to the conventional IER sample. It is proposed for future research that a liquid photopolymer resin made up of an IER be synthesized in order to improve the CO2-capturing ability of manufactured sorbents.
ContributorsObeng-Ampomah, Terry (Author) / Phelan, Patrick (Thesis advisor) / Lackner, Klaus (Committee member) / Shuaib, Abdelrahman (Committee member) / Arizona State University (Publisher)
Created2020